Akron is filled with older neighborhoods where home systems have been pieced together over decades. From the century-old homes near Highland Square and North Hill to post-war houses around Firestone Park and Ellet, many homeowners here are dealing with aging ductwork, outdated breaker panels, worn sewer lines, and HVAC systems that were never designed for today’s demand. Blind & Sons is in Akron every week handling these exact kinds of problems across areas near Route 8, Arlington Road, Market Street, and the neighborhoods surrounding Portage Lakes.
A furnace breakdown in January or a flooded basement after heavy rain is not something Akron homeowners can put off. If you need help with heating, cooling, plumbing, or electrical work, call (330) 753-7711 or contact Blind & Sons online to schedule service with a team that already knows the layouts, infrastructure, and common repair issues found throughout Akron homes.
Working in Akron Homes Every Day4
Akron homes tell you their age the second you walk into them. Some still have original plaster walls and older boiler systems. Others have newer additions connected to ductwork that was never redesigned to support the extra square footage.
We spend a lot of time in neighborhoods near West Exchange Street, Merriman Valley, Goodyear Heights, and Springfield Township where systems have been repaired, expanded, and modified over generations of ownership. In many homes, comfort problems are not caused by one failed part. They come from years of small upgrades layered onto older systems.
AC Repair & Cooling Systems in Akron, OH
Cooling complaints across Akron usually start with airflow. Older homes throughout the city often struggle to move enough conditioned air upstairs, especially during humid stretches in July and August. We also see a lot of enclosed porches, converted attics, and home additions that were added without properly updating the cooling system.
Air conditioning and cooling services we handle throughout Akron include:
- Air conditioning repair
- Emergency AC repair
- AC maintenance
- AC replacement
- Heat pump repair and replacement
- Heat pump maintenance
- Ductless HVAC systems
- Smart thermostats
In neighborhoods with mature trees and older insulation, it is common for certain rooms to stay warmer than the rest of the house no matter how long the AC runs. Our technicians look at the full system, including duct layout, airflow balance, and equipment sizing, instead of just replacing parts and hoping the issue goes away.
Indoor Air Quality Solutions in Akron, OH
Many Akron electrical systems were built long before modern households started running multiple TVs, gaming systems, large HVAC equipment, kitchen appliances, and EV chargers at the same time. It is common for us to find older panels and overloaded circuits in homes that have gone through years of remodeling. Electrical services we handle throughout Akron include:
- Electrical repair
- Electrical installation
- Electrical inspections
- Whole-home generators
- Indoor and outdoor lighting
- Electrical panel upgrades
- Surge protection
- EV charger installation
- Electrical wiring and rewiring
We also see a lot of older homes with partial rewiring jobs where sections of original wiring are still mixed with newer upgrades. If lights flicker, breakers trip regularly, or outlets feel warm, the electrical system should be inspected before the issue becomes more serious.
Furnace & Heating Repair in Akron, OH
Older Akron homes place a heavy demand on heating equipment during Northeast Ohio winters. We regularly work on furnaces and boilers that have been running for decades, especially in homes built before the 1970s where airflow and insulation standards were very different from today. Heating services available throughout Akron include:
- Emergency heating repair
- Heating maintenance
- Furnace repair and replacement
- Boiler repair and installation
- Heat pump services
- Ductless HVAC systems
- Hybrid heating systems
Some of the most common calls we see involve uneven temperatures between floors, noisy ductwork, short cycling furnaces, and rooms that never seem to fully warm up. In a lot of Akron homes, those issues trace back to aging duct systems or previous remodels that changed airflow patterns inside the house.
Plumbing Repair & Drain Services in Akron, OH
Plumbing issues in Akron vary from neighborhood to neighborhood. In older parts of the city, we frequently run into aging drain lines, sewer backups, and galvanized plumbing that has narrowed over time. In newer residential areas, sump pump failures and water pressure issues are more common. Plumbing services we provide throughout Akron include:
- Plumbing repair
- Plumbing maintenance
- Drain cleaning
- Water heater repair and installation
- Plumbing fixtures
- Sewer services
- Sewer camera inspections
- Septic services
- Gas line services
- Sump pumps
- Water treatment systems
Basement moisture is a common issue throughout Akron, especially after heavy storms and spring thaw. We also work in many Summit County homes where hard water buildup has slowly reduced water pressure and shortened the life of fixtures and water heaters.
Electrical Upgrades & Repairs in Akron, OH
Many Akron electrical systems were built long before modern households started running multiple TVs, gaming systems, large HVAC equipment, kitchen appliances, and EV chargers at the same time. It is common for us to find older panels and overloaded circuits in homes that have gone through years of remodeling. Electrical services we handle throughout Akron include:
- Electrical repair
- Electrical installation
- Electrical inspections
- Whole-home generators
- Indoor and outdoor lighting
- Electrical panel upgrades
- Surge protection
- EV charger installation
- Electrical wiring and rewiring
We also see a lot of older homes with partial rewiring jobs where sections of original wiring are still mixed with newer upgrades. If lights flicker, breakers trip regularly, or outlets feel warm, the electrical system should be inspected before the issue becomes more serious.
Why So Many Akron Homeowners Use Blind & Sons
Blind & Sons has worked throughout the Akron area for years, and this is one of the busiest service regions on our schedule. Our technicians already know the differences between homes near downtown Akron, older neighborhoods around Firestone Park, and residential developments stretching toward Green and Fairlawn.
Akron homeowners continue calling Blind & Sons because we provide:
- Fast scheduling and responsive service
- Experienced HVAC, plumbing, and electrical technicians
- Emergency repair availability
- Financing options on qualifying systems
- Full-service support for older and newer homes
- Straightforward recommendations without pressure
A technician who understands Akron housing stock can usually spot problems much faster. That matters when you are dealing with older ductwork, aging plumbing systems, or electrical setups that have been modified multiple times over the years.
What Customers Are Saying
“My furnace went out and Deontae Guthrie was the technician that came out and replaced it.” He was friendly, knowledgeable, and did a great job. The pricing for the replacement was much more reasonable then I thought, plus Blind and Sons offers fantastic financing options. I’m glad my house is warm again and I will be using this company for any future issues.
“We had JoJo install our new furnace and he did an excellent job.” He was very knowledgeable about the job he was doing and also very personable! Extremely nice guy! We will definitely be going back to Blind and Sons! Their price was very reasonable and even well below the quote from a few other competitors.
“Looks like a new furnace.” Shea and his partner let me know when they were enroute and arrived soon after. They were great guys to work with, showed respect for my home, did a great job with the duct repair, and totally cleaned up. Would recommend this team 100%.
Schedule Service in Akron Today
If something in your Akron home is not working the way it should, Blind & Sons is ready to help. Our technicians already work throughout the city every week handling furnace failures, AC problems, sewer backups, electrical upgrades, and airflow issues in homes just like yours.
Whether you live near Portage Lakes, Highland Square, Ellet, or farther out toward Green and Fairlawn, you can count on experienced technicians who understand the common problems found throughout Akron homes. Call (330) 753-7711 or contact Blind & Sons online today to schedule heating, cooling, plumbing, or electrical service in Akron.
Recent Jobs and Reviews in Akron, OH
Job Locations and Reviews
Completed installation of residential air conditioning system and evaporator coil. Installed new outdoor condensing unit on composite base pad with proper clearance from structure, connected electrical disconnect with FLNR 20-amp fuses and appropriate wiring, and verified all electrical connections meet code requirements. System tested and operational upon completion.
Responded to service call for malfunctioning garage ceiling exhaust fan. Upon inspection, assessed both the fan unit and associated electrical wiring in the attic space. Determined that complete fan replacement was the most effective solution. Installed new exhaust fan assembly with proper electrical connections, securing wiring along ceiling joists per code requirements. Verified proper operation and airflow upon completion.
Installed VZPRO Motor Surge Protection System on HVAC blower motor assembly to protect equipment from electrical surges and voltage spikes. All required components were available from truck stock, and installation was completed with system tested and verified operational.
Performed routine maintenance flush on Bradford White tanked water heater to remove sediment buildup and maintain optimal efficiency. Connected garden hose to drain valve, flushed tank until water ran clear, inspected all copper supply lines and brass shut-off valves for proper operation, and verified exhaust vent connections were secure. Unit is operating properly with no leaks detected.
# HVAC Service Completed
Responded to service call for 20-year-old Trane XL90 air conditioning system reported as not working. Upon arrival, performed diagnostic inspection of both indoor and outdoor units.
Interior furnace/air handler inspection revealed significant accumulation of dust and debris on evaporator coil assembly and drain pan, with visible deterioration of components. Heating elements showed signs of age-related wear. Electrical connections and wiring at indoor unit appeared intact but showed environmental exposure.
Outdoor condensing unit examination revealed aged capacitor with weathered wiring connections secured with zip ties. Contactor relay showed operational wear consistent with 20-year service life. Mounting base exhibited severe deterioration with rust staining and accumulated organic debris. Equipment showed extensive exposure to outdoor elements with vegetation encroachment near unit.
Documented current condition of both indoor and outdoor components throu
Responded to service call for two non-functioning HVAC systems in multi-story residence. Upon inspection, found third floor unit experiencing excessive condensation with no cold air output, while second floor unit ran continuously but maintained cold air flow. Examined outdoor condensate drainage system and identified debris accumulation in mechanical compartment including twigs, dried grass, and organic material obstructing proper airflow and drainage around copper refrigerant lines and PVC condensate trap assembly. Cleared debris from unit interior, inspected insulated refrigerant lines and electrical connections, and verified proper condensate drain operation to resolve water leak issue.
Completed installation of 480V AC circuit with new electrical panel and wiring. Installed circuit breakers, surge protection components, and properly terminated all conductors entering the panel from overhead conduit runs. Verified proper amperage readings using clamp meter to ensure circuit is functioning correctly and within specifications.
Installed a dedicated 20-amp circuit for dishwasher application with GFCI protection per current electrical code requirements. Ran new wiring from main electrical panel to kitchen area and installed a 20-amp Siemens GFCI circuit breaker (Part# BS-17682) in the existing panel. Installed a new receptacle at the dishwasher location to provide proper power supply, ensuring all connections met code compliance and safety standards.
Responded to service call for 12-year-old mini split system reported as not working. Connected R410A manifold gauges to assess refrigerant pressures and system operation, performed diagnostic testing to determine root cause of failure and system status.
Responded to no power condition in basement room with no tripped breakers. Upon inspection, discovered improper DIY wiring installation in ceiling cavity near HVAC equipment. Located loose wire connections in junction box concealed above ductwork between floor joists. Secured all wire terminations, verified proper wire sizing and routing per NEC standards, and restored power to affected circuit. Tested all outlets and lighting in basement room to confirm full functionality. Recommended future evaluation of entire basement electrical system due to non-professional installation methods observed.
Performed comprehensive tune-up on 9-year-old Lennox outdoor condensing unit. Connected manifold gauges to refrigerant lines, checked system pressures and temperatures, inspected electrical connections, and verified proper operation of condenser fan motor. Unit operating within manufacturer specifications with no issues identified during maintenance inspection.
Responded to leaking bathtub faucet in 30-year-old residential property. Accessed plumbing infrastructure from below through unfinished ceiling area to inspect supply lines and drain connections serving the affected bathtub fixture. Identified source of leak, performed necessary repairs to stop water intrusion, and documented existing plumbing configuration including PVC drainage and supply line routing for service records.
Responded to service call for leaking showerhead with potential water intrusion behind wall. Upon inspection of bathroom shower area with white subway tile walls, handheld showerhead assembly, and chrome faucet fixtures, assessed the showerhead connection point and wall-mounted bracket system for signs of active leaking or moisture penetration. Documented existing conditions of tile work, grout lines, and plumbing fixtures to determine source of reported leak.
Performed comprehensive annual maintenance on residential standby generator including releveling the unit on gravel base, installing new battery, and applying insulation to roof panels using Generac part #A0000335102. Completed all preventative maintenance procedures to ensure optimal generator performance and reliability.
Completed scheduled cooling maintenance on 3-year-old ground-level air conditioning system during morning service window. Performed comprehensive inspection of outdoor condensing unit, including evaluation of fan assembly, refrigerant lines, electrical connections, and overall system operation. Unit found in functional condition with normal wear for age; all components operating within manufacturer specifications and ready for continued seasonal use.
Responded to service call regarding exposed electrical wire hanging from underneath kitchen cabinet. Tested wire for voltage to confirm it was not energized, traced the circuit to verify it was disconnected from power source, and safely removed the abandoned wiring. Secured all connections in the electrical box, verified the existing outlet and switch assembly on the brick backsplash were functioning properly, and confirmed no additional electrical hazards were present in the work area.
Repaired a leaking 1-inch PVC well line in the basement where corrosion had developed at a swing joint with two elbows. Shut down the well system, cut out the corroded section on both sides, and rebuilt the connection with new couplings and replacement elbows using proper PVC cement. Advised that the glue requires a 24-hour curing period before the well breaker can be turned back on to restore system operation.
Installed three customer-supplied Kohler toilets in residential bathrooms, replacing existing fixtures. Completed installations included proper mounting, water supply connections, and testing for proper flush operation and leak-free performance.
Completed annual cooling maintenance visit on one-year-old air conditioning system. Performed comprehensive system inspection, checked refrigerant levels and pressures using diagnostic gauges, and verified proper operation of all cooling components. Noted water heater in utility area showing signs of moisture accumulation at base with visible floor staining, which may require monitoring or future attention separate from the HVAC system maintenance.
Installed two bathroom faucets in a century-old home with aging plumbing infrastructure. Removed existing corroded fixtures showing significant mineral buildup and rust deterioration around wall penetrations. Connected new faucets using flexible braided supply lines to existing copper stub-outs, addressing water staining and corrosion issues at connection points to ensure proper sealing and prevent future leakage.
