Trusted HVAC, Plumbing & Electrical Services in Canton, OH

Completed comprehensive estimate for replacement of 23-year-old furnace and air conditioning system. Documented existing HVAC infrastructure including ductwork connections, insulation condition, and refrigerant line installation to provide accurate replacement specifications and equipment sizing recommendations.

Completed cooling maintenance visit on 12-year-old Trane HVAC system. Upon arrival, customer was not home; access was rescheduled and gained for service completion. Performed standard preventive maintenance inspection including filter examination, which revealed heavy dust and debris accumulation on the mesh filter requiring attention. Inspected interior components, ductwork, and condensate drainage system with white PVC piping. All accessible components were evaluated for proper operation and wear. System operational at time of service completion.

Completed scheduled cooling system maintenance visit on residential air conditioning system. Outdoor condenser unit was found heavily soiled with dirt, mud, and organic debris accumulation on exterior surfaces and coil fins. Performed thorough cleaning of condenser coils and exterior housing to restore proper airflow and heat transfer efficiency. Inspected indoor Command furnace unit and associated refrigerant lines, condensate drainage system, and ductwork in basement. All components found operational with no immediate service needs identified. System returned to normal operating condition following maintenance procedures.

Completed rebuild of first floor Kohler 4620 toilet, replacing internal tank components including flush valve, flapper assembly, and fill valve mechanism. Addressed water staining and mineral deposit buildup observed in tank interior, installed new Fluidmaster fill valve system with proper float adjustment, and verified proper flush operation and water level settings upon completion.

Completed full-day plumbing service including replacement of kitchen garbage disposal unit with new disposal connected to existing drain system via PVC P-trap configuration. Replaced three-handle tub and shower valve assembly with crystal-style handles mounted on chrome bases against tile wall. Installed whole house water filtration system positioned downstream of existing water softener to provide comprehensive water treatment. Cleared obstruction from bathtub drain to restore proper drainage flow.

Completed routine BS-MVP cooling maintenance visit on 3-4 year old outdoor air conditioning unit. Performed system diagnostics using digital multimeter to verify electrical components and proper voltage levels. Updated filter change maintenance log with current service date, noting previous maintenance history for tracking purposes.

Completed scheduled BS-MVP cooling maintenance visit on a 10-year-old Lennox HVAC system installed in attic space. Performed comprehensive inspection of air handler unit, verified proper operation of all components, checked refrigerant levels, inspected condensate drainage system through PVC piping, and examined exterior electrical disconnect box. System operating within normal parameters with no immediate service needs identified.

Responded to service call for non-functional hot tub outlet that was previously installed in 2021. Inspected the 240V dedicated circuit and outlet, diagnosed the issue, and restored power to ensure proper operation of the hot tub receptacle.

Removed existing 40-gallon gas water heater and installed new 40-gallon electric water heater in basement location. Installed 240-volt electrical circuit to power unit, capped 3-inch flue penetration at chimney, and capped gas supply line at previous connection point. Repositioned water heater orientation to face rear of residence and connected copper supply piping with shutoff valves. Unit tested and verified operational upon completion.

Completed MVP recurring cooling maintenance visit on residential HVAC system. Performed comprehensive inspection of indoor furnace/air handler unit, examining blower motor assembly, gas valve controls, electrical connections, and wiring harnesses for proper operation and safety. Inspected outdoor condensing unit including fan operation, condenser coils, and refrigerant lines. Documented system condition with photos showing all major components functioning properly. Unit rescheduled from previous date and successfully serviced with no issues identified requiring immediate repair.

Installed dedicated electrical circuit for hot water tank including new breaker installation in existing electrical panel. Ran conduit and wiring from basement panel to exterior meter location, completing all connections per code requirements. Verified proper circuit operation and ensured all electrical components were properly secured and labeled.

Performed comprehensive tune-up on 12-year-old air conditioning system with no reported issues. Inspected outdoor unit, tested system performance with digital gauges reading 660 PSI, and documented severely clogged air filter requiring immediate replacement due to heavy dust and debris accumulation restricting airflow. Replaced dirty filter, verified proper blower activation on Aprilaire humidifier control, checked refrigerant levels, and confirmed all system components operating within normal parameters.

Responded to emergency service call for multiple kitchen appliances without power and sparking electrical panel. Upon arrival, found dishwasher, microwave, and garbage disposal all inoperative due to complete power loss. Inspection revealed dangerous sparking condition at main electrical panel requiring immediate attention for safety. De-energized affected circuits and assessed panel condition. Identified faulty breaker connections and compromised wiring causing arcing and power interruption to kitchen circuits. Performed necessary repairs to electrical panel, secured all wire connections, and replaced damaged breaker components. Restored power to all affected appliances and verified proper operation. Tested panel for proper functionality and confirmed elimination of sparking hazard. All circuits now operating safely within normal parameters.

Completed BS-MVP cooling maintenance visit on 2-year-old residential Lennox system. Performed comprehensive inspection of indoor furnace/air handler unit and outdoor condensing unit, verified proper operation of all components including refrigerant lines, condensate drainage system, and electrical connections. All equipment found in good working condition; customer renewed MVP maintenance agreement.

Completed scheduled MVP cooling maintenance visit on 5-year-old Lennox HVAC system. Performed comprehensive inspection of outdoor condenser unit and indoor furnace components. Cleared debris and leaf accumulation from around condenser pad, verified proper airflow through louvered panels, and inspected electrical connections at junction box. Evaluated indoor air handler with attention to PVC condensate drainage system and ductwork connections. System operating within normal parameters. Unit ready for continued service.

Responded to service call for water leak on 10-year-old air conditioning system. Upon arrival, performed visual inspection of outdoor condenser unit, which showed significant exterior corrosion and deterioration of cabinet panels. Noted heavy accumulation of dirt, debris, and organic matter around unit perimeter and against adjacent fence line. Opened access panel to inspect interior components and evaporator coil assembly. Found compressor and internal components operational but surrounded by accumulated debris on base pan. Inspected evaporator coil and identified restricted airflow due to dirt buildup on aluminum fins. Examined condensate drain system and located clog in drain line causing water backup and overflow. Cleared condensate drain line obstruction using appropriate tools and verified proper drainage flow. Cleaned debris from base pan and surrounding areas. Tested system operation to confirm water now draining properly through condensate line without leakage. Documented eq

Completed MVP cooling maintenance visit on 10-year-old system. Performed standard diagnostic testing using digital meter, recording system readings at 5.12 on refrigerant lines and ductwork components. Inspected copper refrigerant piping and PVC condensate drainage system within the air handler compartment, verifying proper insulation placement around penetrations. Replaced heavily soiled 16x20 air filter that showed significant dust and debris accumulation, which was restricting airflow and reducing system efficiency. All mechanical components operating within normal parameters following filter replacement and routine maintenance procedures.

Completed MVP cooling maintenance visit on residential split system air conditioning unit. Performed comprehensive inspection of outdoor condenser unit, refrigerant line set with insulation, and electrical disconnect components. Verified proper operation of all system components, confirmed adequate clearance around outdoor unit, and documented equipment condition through detailed photography. System operating within normal parameters with no immediate service needs identified.

Completed BS-MVP recurring cooling maintenance visit on 3-year-old HVAC system. Performed comprehensive inspection of air handler unit, including evaporator coil assembly and refrigerant lines. Inspected evaporator coil condition, noting serpentine tube arrangement and copper refrigerant connections with insulated suction line. Replaced air filter with new green fibrous filter in cardboard frame. Verified proper installation of reflective insulation material surrounding coil assembly. Documented system condition through photographs of filter replacement and internal coil components. All maintenance items completed per service agreement specifications.

Responded to reported water leak from second floor plumbing into basement area. Upon inspection, identified aged cast iron waste stack with corroded T-junction fitting showing significant deterioration and dusty mineral buildup. The compromised fitting connection was determined to be the source of the leak penetrating through to the lower level. Documented existing plumbing infrastructure including vertical drain stack, associated fittings, and auxiliary supply lines for service records. Customer advised that potential third floor leak was not investigated at this time per their request.