Trusted HVAC, Plumbing & Electrical Services in Canton, OH

Replaced defective GFCI outlet on exterior light post due to failure of protection mechanism. Installed two additional exterior outlets to provide adequate outdoor power access points as requested. All exterior electrical work completed per safety standards, excluding attic work due to presence of vermiculite insulation containing asbestos.

Completed installation of a 2-head ductless mini-split system in an attic space. Mounted indoor air handler unit on plywood wall, installed electrical disconnect with fused protection, and routed refrigerant lines and condensate drainage per manufacturer specifications.

Relocated washing machine to new position, requiring extensive plumbing modifications and labor. Parts were pre-staged in shop along with water heater kit for efficient installation. Work completed with photographic documentation showing flooring transitions and installation area in preparation for appliance repositioning.

Performed warranty leak search on residential air conditioning system. Used Fieldpiece digital manifold gauges to check refrigerant pressures and diagnose potential leak points on outdoor condenser unit. Conducted inspection after customer departed premises to complete thorough diagnostic testing on the system.

Provided comprehensive estimate for complete central air conditioning system replacement. Existing outdoor condensing unit is over 10 years old, has required repairs in two consecutive years, and is currently non-operational. Evaluated existing equipment configuration, photographed current installation showing outdoor unit on concrete pad with refrigerant lines running to building, and assessed replacement requirements. Presented equipment options with warranty coverage details and available financing programs to facilitate system upgrade decision.

Addressed multiple electrical code violations identified during city inspection. Corrected improper wire splice in basement area, removed unsafe hanging receptacle, and installed GFCI protection on exterior bell box for enhanced safety and code compliance. Added wireless three-way switch system to control pull-chain light fixture serving attic access stairway, improving functionality and convenience. All work completed to meet current electrical code requirements and pass final inspection.

Completed comprehensive tune-up on 10-year-old Lennox air conditioning system, including outdoor condenser unit and indoor furnace. Performed standard maintenance procedures: inspected electrical connections and disconnect box, cleaned condenser coils, checked refrigerant levels, tested capacitor and contactor operation, verified proper airflow through ventilation fins, examined condensate drain lines and PVC venting system, inspected ductwork connections, and confirmed all safety controls were functioning correctly. System operating within manufacturer specifications with no deficiencies noted at time of service.

Responded to service call for non-operational sump pump system. Upon arrival, inspected submersible pump assembly in basement sump pit and evaluated discharge piping configuration. Performed diagnostic testing on pump motor and electrical connections to identify failure cause. Verified proper pump operation, checked float switch functionality, and ensured adequate discharge flow through PVC piping system. System restored to normal working condition.

Completed MVP recurring cooling maintenance visit. Inspected HVAC system and replaced heavily soiled cylindrical air filter that exhibited significant dust and debris accumulation throughout pleated media. Verified electrical components, capacitor, and control board within unit are functioning properly with all wire connections secure.

Replaced failed 1/3 horsepower sump pump that had reached end of service life after 25 years of operation. Removed old unit from basin, which showed significant sediment accumulation and mineral deposits, and installed new pump with proper discharge connections to restore basement drainage protection.

Responded to service call for air conditioning unit freezing up at the evaporator coil connection point. Upon arrival, unit was powered off as requested. Performed visual inspection of outdoor condenser unit and indoor furnace/air handler system. Condenser unit located on exterior concrete pad showed normal exterior condition with proper clearances. Indoor air handler connected to ductwork system inspected for airflow restrictions and refrigerant line issues at the A-coil joint area. System age unknown per occupant. Documented equipment condition with photographs for service records.

Completed full warranty replacement of Friedrich air handler unit at unoccupied school facility. Unit installed in mechanical closet with proper filter access, ductwork connections, and electrical conduit routing confirmed operational.

Responded to service call for sump pump displaying error message with history of float switch issues. Upon inspection, identified malfunctioning float mechanism preventing proper pump activation. Tested pump operation, verified electrical connections and wiring integrity, and adjusted float assembly to ensure proper cycling. Confirmed system functionality and drainage capability before completing service.

Completed commercial HVAC installation with two rooftop condenser units and corresponding evaporator coils positioned in the attic space. All electrical connections, refrigerant lines, and condensate drainage were properly installed and tested to ensure system functionality and compliance with manufacturer specifications.

Responded to water leak complaint affecting multiple floors of residence. Upon inspection, identified corroded fitting on 5-year-old water heater in basement area. Documented corrosion damage with photographs showing deteriorated brass connections at copper supply lines with blue-handled shutoff valves. Traced active leak along vertical water line running from basement through to second story. Located water damage and staining on OSB sheathing in upper level, indicating prolonged moisture intrusion from compromised piping. Photographed evidence of water penetration showing characteristic blue-purple discoloration pattern on wall surfaces near plumbing chase. Performed diagnostic evaluation of entire vertical supply line system including inspection of exposed copper piping, fittings, and valve assemblies in basement mechanical area. Assessed condition of connections at water heater and identified need for fitting replacement due to advanced corrosion. Recommended repairs to compromis

Installed two Ring video doorbell cameras at residential property, including mounting hardware and electrical connections. One doorbell unit was mounted on exterior door frame trim with proper alignment and secure fastening. Both devices were configured, tested for proper operation, and confirmed functional before completing installation.

Replaced two failed exhaust fans in the preparation room with new 110 CFM Panasonic units, mounting brackets to the drop ceiling grid and running additional cable to the purlins for proper support. Connected the new fans to existing ventilation ductwork and performed a safety inspection of the main electrical panel as requested.

Performed comprehensive AC tune-up on 4-year-old residential cooling system. Inspected outdoor condensing unit, indoor air handler, and all associated components; verified proper operation of all mechanical and electrical systems. System operating within manufacturer specifications; no issues identified during maintenance visit.

Responded to water heater service call at residential property. Upon arrival, inspected Lochinvar brand tanked water heater, approximately two years and nine months old based on manufacture date. Unit located in basement utility area with standard copper supply line connections and proper venting configuration. Removed top access panel to assess internal components and heating elements. Inspection revealed significant sediment accumulation and corrosion deposits around heating element assembly and within tank opening. Brown discoloration present on internal foam insulation indicating mineral buildup from water quality issues. Multiple wire connections to heating element showed signs of exposure to moisture and sediment. Documented unit condition with photographs showing overall installation and internal component deterioration. Verified warranty status with homeowner, who indicated he is second owner of property. Based on manufacture date and typical warranty terms, discussed coverag

Completed preventive maintenance tune-up on 5-year-old Lennox furnace system. Inspected blower wheel assembly and documented significant dust and debris accumulation on blower blades requiring attention. Evaluated ductwork system for potential cleaning needs and assessed overall system operation. Customer enrolled in renewed maintenance plan with tune-up service applied accordingly.