Trusted HVAC, Plumbing & Electrical Services in Canton, OH

Completed annual air conditioning maintenance on a 6-year-old HVAC system. Performed comprehensive inspection of indoor furnace unit and outdoor condensing unit, checking all electrical connections, refrigerant line sets with service valves, and ductwork components. System operating within normal parameters with no deficiencies noted at time of service.

Completed scheduled MVP cooling maintenance visit on Lennox outdoor condensing unit. Performed comprehensive system inspection including electrical connections, capacitor testing, and overall unit condition assessment. Accessed control panel to examine wiring harness, dual-run capacitor, and terminal connections. All electrical components found to be properly secured with clean connections and no signs of corrosion or deterioration. Capacitor tested within acceptable parameters. Exterior cabinet and coil condition inspected with no visible damage noted. Unit operational and performing to manufacturer specifications.

Provided estimate for installation of exterior water spigot. Accessed interior location through drop ceiling to assess plumbing routing and determine optimal connection point for new fixture. Documented existing conditions and confirmed feasibility of installation.

Completed comprehensive AC tune-up including inspection of blower motor assembly, condenser fan, and electrical components. Verified capacitor connections and wiring integrity, checked motor shaft condition and heat dissipation fins for proper operation. All system components found operating within normal parameters with no repairs required at this time.

Completed MVP air conditioning maintenance service on Lennox cooling system. Inspected outdoor condenser unit, confirmed proper operation of compressor and fan assembly, verified metal fins intact with no visible damage. Replaced dirty pleated air filters at indoor air handler unit. All components functioning within normal parameters.

Completed MVP recurring cooling maintenance visit on residential HVAC system. Upon inspection, found outdoor condenser unit with heavily soiled coil fins showing significant dirt, grime, and debris accumulation affecting airflow and system efficiency. Documented condenser coil condition showing dark brownish-black buildup and yellowish-brown staining on coil surfaces. Inspected copper refrigerant lines and found normal weathering consistent with outdoor exposure. Examined blower wheel assembly and verified clean condition with proper blade spacing and mounting. Unit cabinet showed typical weathering and surface corrosion from outdoor elements. Captured photographic documentation of equipment condition for service records. Contacted customer prior to arrival as requested.

Completed full HVAC system installation including 90% efficiency furnace, air conditioning unit, and whole-home humidifier. Installed new dual-pole contactor with proper electrical connections and verified all copper terminals were secure. Mounted and wired humidifier control panel with digital display, configured automatic mode settings, and confirmed blower activation functionality. System tested and operational with all components communicating properly and humidity control reading accurately at 73%.

Responded to service call for non-functioning laundry supply valves. Upon inspection, found corroded hot and cold water shut-off valves that failed to close properly, creating a potential water hazard. Replaced both brass supply valves with new quarter-turn ball valves, installed new braided stainless steel supply lines, and pressure-tested connections to ensure proper operation and leak-free performance.

Performed comprehensive electrical assessment and repairs including outlet cover replacements and garage wiring evaluation. Identified and addressed multiple grounding deficiencies in existing circuits to ensure proper electrical safety compliance. Inspected electrical panel and kitchen appliance connections, documenting conditions for follow-up work recommendations.

Responded to sewer line backup at residential property over 100 years old. Upon arrival, accessed basement utility area via back entrance and assessed plumbing system. Located main sewer line obstruction causing backup into basement floor drain area. Utilized professional drain cleaning equipment to clear blockage from aged cast iron and PVC piping system. Extensive water staining on concrete floor indicated previous drainage issues consistent with aging infrastructure. Successfully restored proper flow and drainage through main sewer line. Tested system operation and confirmed full functionality of floor drain and connected plumbing fixtures. Documented existing conditions of aged plumbing components including deteriorated vertical stack and insulated waste lines for maintenance records.

Completed MVP cooling maintenance visit on Lennox outdoor condensing unit. Performed standard system inspection, photographed electrical components including capacitor and wiring connections, and documented unit condition. All components operating within normal parameters at time of service.

Completed full HVAC system installation including an 80% efficiency furnace unit in the basement mechanical room and a matching air conditioning condenser unit on the exterior of the property. The furnace was installed with proper ductwork connections, copper refrigerant line sets, electrical wiring, and all necessary safety controls. The outdoor condenser was positioned in a corner location against the brick foundation with adequate clearance for airflow and future service access. All components were tested and verified operational upon completion.

Performed routine cooling maintenance on residential air conditioning system. Inspected outdoor condensing unit and indoor blower assembly, confirming proper operation of all components. System tested and operating within normal parameters.

Conducted on-site estimate for replacement of 32-year-old furnace system. Inspected existing HVAC equipment in basement mechanical room, documenting current configuration including refrigerant line routing with black foam insulation, brass fittings, and existing furnace unit with ventilation louvers. Assessed ductwork, piping connections, electrical service, and overall installation accessibility to provide accurate replacement recommendations and specifications for new heating system.

Responded to a commercial air line leak supplying a dye press system. The leaking PVC air line was traced to a metal output connection point that required capping to stop the air loss. Capped the metal output fitting to isolate the leak and restore proper air pressure to the press equipment.

Removed existing 40-gallon tall water heater and installed new 40-gallon short Bradford White water heater with 6-year manufacturer warranty to improve flue pipe pitch and ventilation clearance. Replaced corroded gate valve with new ball valve on cold water supply line. Installed 4.8-gallon thermal expansion tank to protect plumbing system from thermal expansion pressure. All copper piping connections completed with proper fittings and secured according to code. System tested for leaks, proper operation verified, and thermal expansion tank pre-charged to appropriate pressure.

Performed routine maintenance flush on residential Crown Group tanked water heater to remove sediment buildup and ensure optimal performance. Confirmed all plumbing connections, including copper supply lines and circulation pump system, were functioning properly with no visible leaks or deterioration. Unit inspected and verified to be in normal operating condition with proper venting and standard residential installation intact.

Completed routine maintenance visit on Lennox brand gas furnace system. Performed comprehensive inspection of unit, verified proper operation of all components, and replaced air filter to maintain optimal system performance and indoor air quality.

Completed comprehensive MVP heating maintenance visit on 10-year-old furnace system. Performed thorough inspection of all internal components including burner assembly, gas valve, ignition module, control board, and electrical connections. Documented system condition with detailed photographs showing proper access to unit and verification of all mechanical and safety components operating within normal parameters.

Completed HVAC system replacement estimate for existing 2009 air conditioning unit. Assessed current indoor air handler installation in utility closet and outdoor condenser unit positioned on building exterior with lineset running through landscaped area. Documented equipment conditions, measured existing system specifications, and provided comprehensive replacement quote for complete system upgrade.