Trusted HVAC, Plumbing & Electrical Services in Canton, OH

Responded to no cooling complaint on 16-year-old central air conditioning system. Upon arrival, inspected outdoor condensing unit and found system operational but requiring seasonal startup verification. Confirmed unit powers on, checked electrical connections and wiring at condenser, and verified proper thermostat communication between indoor and outdoor components. System assessed and customer advised of findings.

Conducted on-site assessment for Kohler generator installation. Inspected existing electrical panel to evaluate circuit capacity and available breaker positions for generator integration. Documented current electrical infrastructure including main service panel configuration, circuit breaker arrangement, and existing GFCI/AFCI protection devices. Evaluated basement area for generator transfer switch placement and reviewed structural elements including floor joists, support beams, and existing utility routing. Photographed electrical panel labeling system and basement access points to determine optimal conduit pathways for generator connection. Assessment completed to provide accurate material requirements and labor estimates for whole-house generator installation with automatic transfer switch.

Installed inline water filter on HVAC system air handler unit. Replaced existing filter housing with new unit using truck stock parts. Verified proper water flow and connections, ensured all fittings were secure with no leaks. System tested and operational upon completion.

Met with inspector at 8am as scheduled to review plumbing installation in unfinished utility and attic spaces. Inspection covered white PVC drainage system with multiple branch configurations, T-joints, and elbows secured to wooden framing with gray plastic mounting brackets. Vertical and horizontal pipe runs were examined throughout both levels, including connections between tiled utility area and upper floor rough-in. All plumbing infrastructure was presented for code compliance verification and approval.

Conducted furnace replacement estimate at residential property. Unit is located in confined basement mechanical room with limited access, requiring removal for proper service or replacement. Provided quote for new equipment installation with appropriate labor considerations due to challenging installation conditions.

Completed extensive ABS drain pipe replacement due to broken fitting in main drainage stack. Cut out and removed compromised hub-to-hub fittings from basement through first floor offset, requiring access through kitchen cabinet back panel and basement drywall removal. Accessed crawl space to cut and remove 4" drain pipe section. Rebuilt entire drainage assembly maintaining original configuration and orientation to properly connect with existing plumbing infrastructure. Replacement parts were ordered and received prior to completion of repair work. Additionally scheduled follow-up appointment to replace expansion tank, estimated one hour duration.

Responded to clogged kitchen sink in 1960s-era home. Upon arrival, found double-basin stainless steel sink with standing water in both basins—left basin contained relatively clear water while right basin had dark, murky water with visible sediment and debris accumulation. Inspected under-sink plumbing configuration which included white PVC P-trap assembly connected to garbage disposal unit. Cleared blockage from drain line, restored proper drainage to both basins, and verified garbage disposal operation. System tested and functioning normally upon completion.

Completed full system installation of a Lennox 90% efficiency air conditioning unit at residential property. New condenser unit was positioned on black platform pad with gravel base against exterior brick wall, with proper clearances maintained for airflow and service access. All refrigerant lines, electrical connections, and condensate drainage were installed to manufacturer specifications. System was pressure tested, charged with refrigerant, and verified operational with digital gauges confirming proper temperatures and pressures across the system.

Conducted comprehensive electrical assessment of 6-unit apartment building to provide estimate for complete service upgrade. Evaluated existing service entrance, determined requirements for new drop band installation from street to main service entrance point, and assessed current meter socket configuration for replacement with new individual metering for each unit. Inspected aging electrical panels throughout building, noting deteriorated equipment with significant rust and wear requiring full replacement with new main panels for all six units and new sub-panels as needed. Examined existing conduit routing and wiring infrastructure in common areas, including detailed inspection of laundry room electrical systems to verify code compliance and safety conditions. Documented all findings with photographs of exterior service entrance area showing current meter locations and interior utility spaces displaying existing panel conditions and wiring configurations to support comprehensive proje

Responded to callback for water leak on recently installed AC system. Upon arrival, inspected condensate drainage system and found condensate pump operational but reservoir experiencing overflow issues. Verified pump discharge line routing and confirmed proper operation of safety float switch. Checked air handler drain pan for blockages and ensured primary and secondary drain lines were clear and flowing properly. System tested and monitored through complete cooling cycle with no further leakage observed.

Responded to service call for non-functioning landscape lighting system. Performed troubleshooting on existing landscape lights and tested with new transformer, but was unable to restore power to any of the fixtures. Determined that the landscape lighting circuit requires extensive repair or replacement. Scheduled follow-up visit for spring season to provide detailed quote for complete rewiring and reinstallation of landscape lighting system.

Conducted comprehensive electrical safety inspection and assessment of existing main electrical panel in basement. Panel identified as original to home construction, requiring evaluation for replacement due to age and current electrical code compliance. Documented exterior service entrance components, including weatherhead connections, service mast, and meter base configuration. Evaluated overhead service drop connections and exterior conduit routing along building envelope. Assessed panel capacity, breaker conditions, and overall system integrity to determine replacement specifications and scope of work required for modern electrical service upgrade.

Completed full HVAC system installation including outdoor condenser unit and electrical disconnect components. Installed 90% efficiency air conditioning condenser on level pad with proper gravel base and positioning against exterior wall for optimal airflow and serviceability. Mounted and wired electrical disconnect box with appropriately rated Littelfuse fuses to ensure proper overcurrent protection and code compliance. Verified all electrical connections, tested system operation, and confirmed unit is functioning within manufacturer specifications.

Conducted main line repair estimate for stack replacement in basement utility area. Assessed existing vertical drainage pipes running along cinder block wall and evaluated P-trap configuration beneath sink fixture. Documented current plumbing infrastructure conditions including aged black drain pipes, mounting hardware, and wall-mounted drain assembly showing signs of moisture exposure and typical wear. Technician to return following completion of restoration company's work to finalize stack replacement installation.

Installed GFCI outlet for VPL equipment in stairwell landing area near electrical panel per specified placement requirements. Coordinated arrival time with customer and completed installation within scheduled timeframe. All work performed to code with proper grounding and protection in place.

Responded to service call for strong odor emanating from toilet. Upon inspection, discovered extensive deterioration in toilet tank interior with significant rust accumulation on metal components and heavy mineral deposit buildup throughout. Water supply line and internal tank mechanisms showed signs of age-related wear. Examined toilet base and surrounding floor area, noting degraded wax ring seal evidenced by discolored expanding foam material and moisture damage to flooring. Documented rust staining on floor surfaces and compromised seal integrity at toilet-to-floor connection point, which was identified as primary source of odor complaint. Assessed overall fixture condition revealing advanced deterioration requiring attention to internal tank components and base seal replacement to resolve sanitation concerns and eliminate odor issue.

Performed on-site estimate for furnace replacement due to cracked heat exchanger in 17-year-old unit. Assessed existing HVAC system configuration in basement mechanical room, documented equipment condition with photographs, and provided quote for complete furnace replacement with new high-efficiency unit and associated components including PVC venting system.

Replaced washer box in first-level laundry room by cutting open wall access to reach plumbing infrastructure behind the installation area. Connected new supply lines to existing drain line and installed new shut-off valves with brass fittings, including one valve with blue handle and one with red handle, mounted on white plastic mounting plate secured to wall studs. Installed customer-supplied braided metal washer hose lines to replace existing connections. Wall cavity work exposed fiberglass insulation between studs, with all plumbing connections completed and tested for proper operation. Drywall repair left for homeowner responsibility as agreed.

Responded to service call for recently installed Generac generator displaying multiple fault codes including engine fuel alarm, CANbus error alarm, and low battery voltage alarm preventing unit operation. Upon arrival, performed diagnostic testing using digital multimeter to assess battery condition. Measured battery voltage at 13.45 volts under static conditions, which falls below the manufacturer's minimum threshold required for proper generator operation and control system functionality. Low battery voltage was determined to be the primary cause of the cascading fault conditions, as insufficient power to the control board resulted in CANbus communication errors and false fuel system alarms. Advised that battery requires charging or replacement to restore generator to operational status and clear all associated fault codes from the MobilLink monitoring system.

Completed preventive maintenance tune-up on 2-year-old air conditioning system. Upon inspection, found significant dust and debris accumulation throughout the unit's interior compartment, including heavy buildup on surfaces around refrigerant lines and evidence of leaves and organic material in the base. Performed thorough cleaning of all accessible components, inspected refrigerant lines for proper insulation and connections, verified electrical wiring integrity, and checked condenser/evaporator coil condition. System restored to optimal operating condition with improved airflow and efficiency.