Trusted HVAC, Plumbing & Electrical Services in Canton, OH

Conducted inspection of plumbing system in utility area with focus on toilet replacement needs. Assessed current installation and confirmed quote details for new American Standard Champion toilet (1.6 GPF, elongated bowl, comfort height). Documented existing conditions including water damage on corrugated metal wall panels and examined exposed ceiling infrastructure with PVC piping. Customer requires additional estimates for other plumbing work.

Performed routine MVP heating maintenance on 1-year-old Lennox WT 08-2034 system. Inspected and tested circuit board connections and components, confirming all electrical connections were secure. System is functioning properly with no issues identified.

Completed installation of a new 80% efficient furnace and air conditioning system in customer's basement. Installed new galvanized ductwork with proper connections and seams, including insulated black return duct with 90-degree bend. System includes copper refrigerant lines connecting to the outdoor AC unit, with all necessary electrical connections properly secured.

Performed heating system maintenance service which included comprehensive combustion analysis with Bacharach analyzer showing acceptable readings (O₂: 14.2%, CO: 36ppm, CO₂: 3.0%, Lambda: 3.09). Inspected control board and wiring connections, verifying proper electrical connections and harness integrity on the main circuit board.

Performed scheduled MVP Heating preventive maintenance. Conducted inspection using specialized tools to access and evaluate heating system components. All maintenance tasks completed according to service protocol.

Completed 200A service upgrade with code-compliant exterior disconnect installation per 2023 NEC requirements. Installed new panel board and electrical kit with proper wiring connections and terminal assembly. All components were properly mounted and secured to exterior wall with appropriate conduit connections.

Performed scheduled maintenance on Generac generator. Inspected unit despite winter conditions and significant snow accumulation. Verified proper operation of control systems and confirmed green indicator light functioning correctly. Checked all connections and components within the Goodman HVAC system integration.

Performed flush and fill service on Bradford White "Defender" tanked water heater as requested by HVAC department. Inspected complete system including expansion tank, copper supply lines, and ventilation components. System is properly installed against concrete block wall with all connections secure and functional.

Responded to emergency call for non-operational furnace in elderly resident's home. Diagnostic inspection revealed ice blockage in the PVC exhaust vent pipe, preventing proper combustion gas ventilation. Cleared ice accumulation, inspected internal components for water damage, and verified proper operation of all safety switches. System successfully restored to normal operation with heat output confirmed. Advised customer on preventative measures to avoid future vent pipe freezing during extreme cold conditions.

Responded to service call for kitchen outlet with no power and circuit overload issues when microwave operates simultaneously with other appliances. Performed electrical diagnostics using multimeter on GFCI outlet and standard receptacle. Located and repaired loose connections in junction box within utility space that were causing intermittent power loss. Tested all circuits after repair to confirm proper load distribution and functionality.

Performed HVAC system replacement including installation of an Armstrong Air furnace with proper PVC ventilation system in the utility room. Mounted unit securely with yellow brackets against concrete block wall and connected to existing ductwork. Completed electrical connections and ensured proper integration with household systems.

Diagnosed furnace issue presenting with loud humming noise from inducer motor and improper heating cycle. Inspection revealed significant rust and wear on internal components, with particular deterioration around the inducer assembly. Cleaned electrical connections on control board and verified proper wiring configuration. Restored normal operation with appropriate flame sequence and heat production.

Performed diagnostic service on 3-year-old Mitsubishi mini split system that was not running properly. Inspection revealed significant dust and debris accumulation on the indoor coil fins, severely restricting airflow and system efficiency. Thoroughly cleaned evaporator coil to restore proper heat transfer and system performance.

Installed a new dedicated VPL (vertical platform lift) outlet in the garage per customer specifications. Ran appropriate electrical wiring through ceiling joists in the unfinished storage area, ensuring proper cable management and code compliance. Completed installation according to placement documentation and verified proper functionality before completion.

Conducted in-home estimate for replacement of standard-vent 50-gallon gas water heater in customer's residence. Current Rheem Performance unit (manufactured 2021) appears operational with proper connections to water supply lines and pressure relief valve. Customer seeking quotation for replacement of existing system which has approximately 5 years of service life remaining.

Performed routine maintenance flush on 3-year-old Rheem tanked water heater to remove sediment buildup and ensure optimal performance. Also inspected customer's Whirlpool water softener system as requested, checking connections and verifying proper operation. Both systems are now functioning correctly with improved efficiency.

Successfully cleared a clogged bathroom sink drain using a snake tool. Inspected the drain and basin assembly to ensure proper drainage was restored and that no additional plumbing issues were present.

Performed diagnostic assessment on 6+ year old gas water heater with no hot water output. Inspected significant sediment buildup after customer-performed draining. Examined copper supply lines and ventilation system, noting corrosion on pipes and proper connection of metal ductwork to Rheem Performance unit. Provided replacement quote and information on financing options as requested.

Performed complete furnace tune-up service that was previously rescheduled. Inspection included using hex key to check and adjust mechanical components. Service ensured proper system operation and efficiency for the heating season.

Performed scheduled furnace tune-up service. Inspected blower wheel assembly for proper operation and cleanliness. Examined motor connections, verified secure electrical wiring to control board, and confirmed all safety labels were intact and legible.