HVAC, Plumbing & Electrical in Cuyahoga Falls, OH

Completed annual preventative maintenance and tune-up on 4-year-old Coleman furnace system. Performed comprehensive inspection of furnace control board, verified all electrical connections and components functioning properly, checked gas valve operation and burner assembly, inspected heat exchanger for cracks or deterioration, tested ignition system, verified proper venting and condensate drain operation, and confirmed all safety controls operational. System operating within manufacturer specifications with no issues found.

Completed scheduled AC tune-up on 10-year-old Trane XL16i condenser unit. Performed comprehensive preventive maintenance inspection including checking refrigerant levels, cleaning condenser coils, testing electrical connections, verifying proper fan operation, and ensuring optimal system performance. Unit operating within manufacturer specifications with no issues identified.

Completed preventive maintenance on 4-year-old air conditioning system. Inspected outdoor condensing unit and indoor air handler, verified proper operation of all components, and checked system airflow. Replaced air filter and assessed ductwork condition for potential cleaning needs.

Completed scheduled MVP cooling maintenance visit on residential HVAC system. Performed comprehensive inspection of Lennox furnace unit in basement and outdoor condensing unit, documenting equipment condition through photographic records. Verified proper operation of all cooling system components, checked refrigerant levels, inspected electrical connections, and confirmed adequate airflow through intake and exhaust venting. System operating within normal parameters with no immediate service needs identified.

Completed comprehensive MVP AC maintenance on residential outdoor cooling unit. Performed thorough inspection of condenser unit exterior, verified proper clearance around equipment and adequate airflow through louvered panels. Accessed electrical compartment and inspected all internal components including contactor, capacitor, and associated wiring connections. Verified all electrical connections were secure and free of corrosion, confirmed capacitor readings within manufacturer specifications, and ensured proper operation of contactor. System operating efficiently with no deficiencies noted.

Provided complimentary second opinion for commercial lighting control issue where employees were required to access the breaker panel to operate lights. Evaluated existing electrical panel configuration and breaker mapping system, documented current lighting circuits serving office spaces and computer areas. Recommended installation of additional wall-mounted light switch to provide convenient local control and eliminate need for staff to access electrical panel for routine lighting operations.

Performed comprehensive assessment of existing Lochinvar tanked water heater system in basement utility area. Evaluated unit condition, examined plumbing connections including supply and discharge lines, inspected venting configuration with PVC components, and assessed overall system performance. Provided detailed estimate for repair options and complete water heater replacement, including both traditional tank and tankless water heater alternatives to address customer's heating needs.

Installed new 40-gallon tall water heater with 10-year warranty, including complete plumbing connections with copper piping, pressure relief valve, and wall-mounted expansion tank. Installed new icemaker supply line to provide dedicated water connection for refrigerator ice maker. All components professionally staged, assembled, and tested to ensure proper operation and code compliance.

Completed routine maintenance on a 17-year-old air conditioning system and an 8-year-old gas furnace. Inspected outdoor condensing unit with electrical disconnect, verified proper operation of condenser fan motor and coil assembly, and cleaned accumulated debris from top-mounted fan assembly. All components found to be in functional condition with normal wear for equipment age.

Completed preventive maintenance inspection on 9-year-old Lennox air conditioning system. Performed electrical diagnostics using clamp meter to verify proper amperage draw and system operation. Inspected outdoor condenser unit, confirmed adequate airflow through coil fins, and verified unit is operating within manufacturer specifications.

Completed MVP recurring cooling maintenance visit on a 7-year-old system. Inspected blower wheel assembly and documented significant dust and debris accumulation on fins and interior surfaces requiring attention for optimal airflow efficiency. Performed standard preventive maintenance procedures on the furnace and air handling components, verified all mechanical systems operational, and documented equipment condition with photographic records for service history.

Responded to complaint of constantly running toilet. Upon inspection, found deteriorated fill valve causing continuous water flow into tank. Replaced faulty fill valve assembly with new unit, adjusted water level to proper height, and tested flush mechanism to ensure proper operation and complete shutoff.

Completed installation of downflow air conditioning system at residential property. Installed outdoor condensing unit on paver patio with proper electrical disconnect and conduit routing, positioned unit against exterior wall with adequate clearance for airflow and maintenance access. Replaced damaged fuse block assembly that showed signs of heat exposure, installed new dual-fuse protection with proper amperage rating to ensure safe electrical operation of the system.

Completed scheduled cooling maintenance on 7-year-old air conditioning system. Upon inspection, discovered extensive frost and ice buildup on evaporator coil assembly, indicating restricted airflow or potential refrigerant issue. Performed diagnostic testing with multimeter at outdoor condenser unit to assess electrical values and system performance. Documented frozen coil condition and system readings for further evaluation and necessary repairs.

Responded to emergency water leak from hot water tank. Upon inspection, confirmed active leak at base of unit requiring immediate attention. Documented existing water heater condition and surrounding plumbing connections for service records.

Uninstalled elongated toilet that had been previously installed and replaced it with a standard round-bowl toilet to meet customer specifications. Parts were ordered and received at the shop prior to completing the installation. Work completed in approximately 2.5 hours.

Completed HVAC system replacement estimate for 32-year-old furnace and air conditioning unit with identified refrigerant leak. Assessed existing National Comfort Products outdoor condensing unit, ductwork configuration, electrical panel capacity, and PVC condensate drain lines in utility area. Provided comprehensive replacement quote for complete system upgrade.

Completed installation of add-on air conditioning system with new evaporator coil to existing Carrier furnace in basement utility area. Installed new A/C coil unit with proper ductwork connections, mounted air handler securely to ceiling joists, and integrated refrigerant lines with existing HVAC infrastructure. System tested and verified operational with all components functioning within manufacturer specifications.

Completed AC circuit installation for permanent wiring infrastructure in basement crawl space area. Installed new electrical conduit routing along exposed joists, integrated junction boxes and support brackets to existing structural framework, and verified proper circuit protection and code compliance. All wiring secured to wooden beams with appropriate standoffs to maintain clearance from plumbing lines, HVAC ductwork, and insulation materials.

Responded to water leak call where kitchen sink drain piping had become disconnected. Upon arrival, found the P-trap assembly had separated at the threaded coupling, causing water to drain directly into the cabinet space. Reconnected and properly tightened all PVC drain connections, ensuring secure seal at trap joints and tailpiece connection to prevent future leaks.