HVAC, Plumber & Electrician Services in Fairlawn, OH

Responded to service call for non-functioning outdoor light. Removed existing fixture and installed customer-provided replacement motion-activated security light on exterior porch ceiling. Verified proper operation after installation and ensured all connections were secure and weatherproof.

Completed installation of new American Standard Champion toilet (comfort height, elongated bowl, 1.6 GPF) as quoted. Removed old toilet showing significant floor staining and drain discoloration. Properly sealed new unit to floor with appropriate caulking to prevent future water damage.

Conducted routine maintenance visit for MVP customer's furnace. Inspected hardware components including L-brackets and fasteners. Utilized hex key tool to tighten loose connections in the furnace assembly.

Performed scheduled MVP maintenance service on 22-year-old furnace. Removed front panel to inspect internal components including blower motor, circuit board, and wiring. Cleaned system and checked all connections, noting minor corrosion on heat exchanger components that remain functional.

Performed scheduled MVP heating maintenance service. Inspected electrical control panel components and wiring connections for proper functionality. Identified and replaced corroded L-shaped metal connector to ensure reliable system operation.

Performed inspection of existing sump pump system to provide replacement quote. System includes main pump in sump pit with several PVC discharge lines, wall-mounted control box, and battery backup unit. Observed water stains around pit area and evaluated electrical connections for both primary pump and backup system.

Responded to no-heat call for 8-year-old furnace. Upon inspection, discovered debris in blower wheel causing operational failure. Removed obstructions, cleaned blower assembly, and restored proper airflow. System now functioning correctly with normal heat output.

Responded to no-heat call for Trane furnace. Diagnosed faulty control board, which was removed and stored in container for reference. Installed replacement board and verified proper operation by testing airflow and temperature at registers using digital thermometer. System now functioning normally with consistent heat output.

Performed scheduled MVP Heating maintenance service, which included inspection of the furnace system and associated components. Replaced dirty pleated air filters with new Naturalaire filters. Examined and cleaned the humidifier unit, checking the honeycomb evaporator pad and water supply connections for proper function.

Responded to no heat call for a furnace blowing cold air. Upon inspection of the HVAC system located in utility closet alongside water heater, diagnosed issue with ignition sequence. Cleaned flame sensor, reset system, and verified proper operation with multiple heating cycles. Unit is now functioning correctly with appropriate temperature rise.

Responded to service call for kitchen sink leak affecting lower level. Inspection revealed water damage to ceiling/wall with exposed wooden framing. Examined under-sink plumbing system including PVC drain assembly and supply lines. Repaired leaking connection to prevent further water infiltration and structural damage.

Performed diagnostic service on toilet with recurring flush issues. Identified and corrected internal flush mechanism malfunction requiring multiple attempts to clear bowl. Demonstrated proper procedures for shutting off main water supply valve and exterior spigot operation per customer request.

Successfully completed installation of a new 80% FRN furnace with matching Lennox AC outdoor unit. System was properly connected to existing ductwork in the mechanical room, with all necessary electrical and refrigerant lines installed according to manufacturer specifications. Final inspection confirmed proper operation of the complete heating and cooling system.

Responded to urgent no-heat service call for 13-year-old furnace. Upon inspection, diagnosed system failure and performed necessary repairs to restore heating function. Equipment is operational but showing age-related wear; recommended continued monitoring.

Performed routine furnace tune-up service as requested by customer. Inspected gas valve for proper operation and examined control board connections. All components tested functional with no issues detected.

Performed scheduled maintenance on Lennox heating system. Inspected blower wheel assembly which showed signs of wear and scratching on the hub disc. Examined interior components including motor, fan assembly, electrical connections, and control boards to ensure proper functionality.

Performed diagnostic inspection on furnace system exhibiting delayed heating. Identified normal operation of blower motor and circuit board components despite customer concern about initial cool air. Explained to customer that modern furnaces have a programmed delay before heating elements activate to prevent cold air distribution and improve efficiency.

Performed inspection of existing heating system that appears to be severely outdated per customer. Current unit shows significant wear with damaged housing, exposed internal components, and insulation protruding through the upper section. Recommended full system replacement due to age-related deterioration and potential safety concerns with the current installation.

Performed recurring MVP Heating maintenance service on Lennox HVAC system. Inspected and documented condition of pleated air filter in housing. System components appear to be functioning properly with no visible issues noted.

Responded to service call regarding urinal flooding after multiple flushes. Upon inspection of the commercial restroom, identified drainage issue in wall-mounted urinal with chrome flush valve. Cleared blockage in drain line to restore proper drainage function and prevent future flooding incidents.