Your home should be the one place where everything works as it should — comfortable air, flowing water, and safe, reliable power. Since 1937, Blind & Sons has been helping Hudson homeowners keep it that way. With a focus on complete home comfort, we offer trusted HVAC, plumbing, and electrical services all under one roof. Our goal is simple: show up when you need us, do the job right, and make sure you’re completely satisfied before we leave.
From routine maintenance and system replacements to emergency repairs, Blind & Sons is the go-to team for quality home service in Hudson, OH. Call (330) 753-7711 or https://www.blindandsons.com/contact-us
Proud to Serve the Hudson Community
Hudson is known for its charm, community spirit, and beautiful homes. With scenic trails, a lively downtown, and a proud history, it’s no surprise that so many families choose to call Hudson home. Blind & Sons is proud to be part of that story — delivering reliable, respectful service to homeowners across the area.
Whether you’re in an older colonial on North Main or a modern build near Boston Mills Road, our team understands the unique needs of Hudson homes. We tailor every visit to fit your home’s layout, your budget, and your long-term comfort goals.
Need Services?
We Can Help!
Heating & Cooling Services Built for Hudson Homes
Living in Northeast Ohio means dealing with both freezing winters and humid summers — and that makes your HVAC system one of the most important parts of your home. At Blind & Sons, we provide full-service heating and cooling solutions to keep your system efficient, reliable, and ready for whatever the weather throws at it.
Our HVAC services include:
- Air conditioning installation and replacement: We help you select the right AC unit for your home’s size and needs, then install it with care to ensure long-term performance.
- Furnace and boiler repair and installation: If your system is noisy, inconsistent, or not heating well, our experts can repair or replace it fast.
- Heat pump and ductless system services: Great for energy efficiency and room-by-room control, these systems are a favorite among homeowners looking to save on utility bills.
- Hybrid heating solutions: These systems combine the power of gas heating with the efficiency of electric heat pumps to optimize comfort and cost.
- Thermostat installation and troubleshooting: Whether it’s a smart thermostat or a standard model, we’ll make sure your controls are accurate and easy to use.
- Annual HVAC maintenance and tune-ups: Regular maintenance reduces the risk of surprise breakdowns, improves energy efficiency, and extends the life of your system.
Blind & Sons also offers affordable Maintenance Value Plans that provide routine tune-ups, discounts on service calls, and priority scheduling — helping you stay ahead of costly issues before they start.
Hudson Plumbing Services That Keep Everything Flowing
When your plumbing acts up, it’s more than an inconvenience — it can interrupt your whole routine. Whether it’s a slow drain, a water heater issue, or a leaking pipe, you need help fast. Blind & Sons provides dependable plumbing services in Hudson designed to restore comfort and protect your property.
Our plumbing services include:
- Pipe repairs and leak detection: From dripping faucets to hidden slab leaks, we find and fix problems quickly.
- Drain cleaning and clog removal: We use professional tools to remove stubborn blockages and prevent future backups.
- Water heater installation and repair (tank and tankless): We repair all brands and install high-efficiency models that deliver reliable hot water.
- Sump pump repair and replacement: Keep your basement dry and protected with reliable sump pump service.
- Gas line services: Safe gas line installation and repair for stoves, grills, fireplaces, and more.
- Plumbing system inspections: Catch issues before they escalate with comprehensive inspections and proactive recommendations.
We also provide whole-home water filtration and reverse osmosis systems to improve your water’s taste, clarity, and safety. Whether you’re dealing with hard water or want to reduce contaminants, we can help.
Safe & Professional Electrical Services in Hudson
Electricity powers just about everything in your home, from lighting and appliances to your HVAC and security systems. That’s why it’s so important to have a trusted electrician when something goes wrong. Blind & Sons offers a wide range of electrical services, always performed by licensed, trained professionals.
Our electrical solutions include:
- Electrical panel upgrades: Older panels can struggle to meet today’s energy demands. We’ll upgrade yours to keep your home safe and powered.
- Outlet and switch installation: Add outlets where you need them or replace aging ones for better safety and appearance.
- EV charger installation: Get fast, safe EV charging right at home, compatible with most makes and models.
- Whole-home surge protection: Protect expensive electronics and appliances from power surges and lightning strikes.
- Standby generator installation and maintenance: Keep your home running during power outages with a reliable backup power source.
- Lighting upgrades and ceiling fan installation: From recessed lighting to exterior upgrades, we brighten your home inside and out.
We also offer electrical safety inspections for home buyers and sellers, ensuring your property is up to code and ready for the future.
Need Services?
We Can Help!
Why Choose Blind & Sons in Hudson?
There’s a reason Hudson homeowners have trusted Blind & Sons for generations. We don’t just provide home services — we deliver peace of mind. With over 80 years of experience and a commitment to doing the job right the first time, we’re the name families count on for comfort, safety, and long-term savings.
When you choose us, you benefit from:
- Background-checked, regularly trained technicians
- 100+ hours of continuing education each year
- Upfront pricing and honest recommendations
- emergency service with no overtime fees
- Maintenance Value Plans for ongoing care and savings
- Coupons and financing to make service more affordable
We also back our work with warranties and a 100% satisfaction guarantee — because you deserve nothing less.
Schedule Home Services in Hudson, OH Today
Whether you’re looking to fix a nagging issue, upgrade an outdated system, or take proactive steps to protect your home, Blind & Sons is here to help. From HVAC and plumbing to electrical repairs and replacements, we’re your one-stop shop for reliable, professional service in Hudson.
Call (330) 753-7711 or contact us online to schedule your appointment today. Let Blind & Sons keep your home running smoothly — so you can focus on enjoying it.
Recent Jobs and Reviews in Hudson, OH
Job Locations and Reviews
Completed MVP cooling maintenance visit on two residential HVAC units located in basement and attic. Performed comprehensive system inspections including electrical testing with digital multimeter, verified proper voltage and amperage readings on both units, and documented equipment conditions through photography. Inspected attic-mounted air handler unit, refrigerant lines, and associated ductwork connections for proper operation and secure mounting.
Responded to service call for non-functional air conditioning system in basement area with excessive heat buildup. Upon inspection, found 15+ year old unit with significant maintenance issues including severely clogged evaporator coil with heavy dust and debris accumulation restricting airflow, and visible crack in metal ductwork compromising system integrity. Documented equipment condition with photos showing extent of deterioration and lack of previous maintenance on aging system.
Installed customer-supplied bathroom exhaust fan system, including interior ceiling-mounted light fixture with bronze trim ring and white diffuser, and exterior wall vent with louvered cover on vinyl siding. All components were properly wired, secured, and sealed to ensure proper ventilation and weather protection.
Completed annual AC tune-up for MVP member at residential property. Performed comprehensive system inspection including temperature differential testing, which showed 68°F reading at supply register. Inspected outdoor condensing unit and noted significant rust and corrosion on base plate and internal components, indicating extended outdoor exposure and potential moisture accumulation issues. Verified electrical connections, capacitor functionality, and all wire terminations. System operational at time of departure, though unit age unknown and corrosion may require future attention for component longevity.
Completed full HVAC system installation including new Lennox outdoor condensing unit positioned on concrete pad with proper mounting and vibration isolation. Established refrigerant line connections with copper piping, service valves, and insulated drainage line, ensuring all connections were properly secured and sealed. System installed per manufacturer specifications with appropriate electrical connections and conduit routing on exterior brick wall.
Completed installation of 97% efficiency furnace in residential basement utility area. Previous furnace failure had resulted in loss of cooling capability for the recently installed air conditioning system. Installed new gray metal forced-air furnace unit with proper venting configuration using white PVC intake and exhaust piping extending vertically from unit top with elbow fittings. Secured all electrical connections with black wiring routed to upper section of installation. Connected metal supply and return ductwork to furnace air handler. Installed condensate drainage line using white PVC piping at lower unit section. Verified proper integration with existing air conditioning equipment and water heater in shared mechanical space. All connections secured per manufacturer specifications and local code requirements. System tested and operational.
Replaced two existing water heaters with new Bradford White units: a 40-gallon tall model serving the master bath and laundry area, and a 50-gallon unit serving the remainder of the residence. Upgraded cold water shut-off valves on both units and eliminated the hot water shut-off valve on the 50-gallon unit. Installed expansion tanks on both water heaters with proper bonding wire connections. Rebuilt corroded hot and cold water copper lines above the 40-gallon unit from the heater to ceiling-mounted swing joint 90-degree fittings, removing green corrosion-damaged piping. Eliminated the humidifier supply valve during the replumb. Installed drain pan beneath the 40-gallon water heater with discharge line routed to existing sump pump for overflow protection. All installations completed per manufacturer specifications with proper venting and code-compliant connections.
Responded to no-cooling complaint for family room and master bedroom zones on 3-5 year old system. Upon inspection, found outdoor unit condenser coil heavily contaminated with dirt, debris, and organic matter buildup, severely restricting airflow and heat transfer capability. Filter media showed extreme soiling with significant dust accumulation and discoloration throughout. Cleaned condenser coil thoroughly, replaced dirty filter, and verified proper airflow restoration. System tested and confirmed operational with adequate cooling to affected zones.
Converted hardwired smoke detectors to battery-powered units in residential property. Installed new battery-operated smoke alarms on ceiling locations in main living area and upper level near staircase, ensuring proper placement and functionality. All units tested and confirmed operational with illuminated status indicators.
Responded to service call for leaking mini split indoor unit on ground floor. Upon arrival, inspected the affected unit which had been shut off by customer. Examined evaporator coil assembly, refrigerant line connections, and condensate drainage system. Inspected exterior refrigerant lines and mounting brackets along soffit area. Documented system condition with photos showing coil assembly, refrigerant line routing, and installation components. Identified source of water leak and provided recommendations for repair to restore system operation.
Responded to no hot water complaint on 26-year-old residential water heater. Upon arrival, performed diagnostic inspection of tanked water heater unit. Identified Bradford White 48-gallon automatic storage water heater (Serial #0WA1519761) that had reached end of service life and was no longer producing hot water. Documented existing equipment condition with photographs showing unit specifications, safety labels, and overall installation. Unit exhibited typical age-related failure consistent with expected lifespan for residential water heating equipment. Advised customer of findings and provided recommendations for replacement options.
Conducted comprehensive assessment of existing HVAC system for equipment replacement estimate. Evaluated current installation consisting of aging air handler, Lennox furnace, and associated ductwork in basement mechanical room. Documented system configuration including refrigerant lines, condensate drainage, electrical connections, and duct transitions. Noted significant frost accumulation on evaporator coil indicating active cooling operation. Photographed equipment layout, clearances, and existing infrastructure to develop accurate replacement specifications and scope of work for customer consideration.
Completed installation of new Lennox air conditioning condenser unit and evaporator coil at residential property. Unit was positioned on existing concrete pad, electrical connections were made via conduit from house exterior, refrigerant lines were installed and properly insulated, system was evacuated using vacuum pump to remove moisture and contaminants, then charged with refrigerant to manufacturer specifications. All connections were tested for leaks and system operation was verified to ensure proper cooling performance.
Installed dedicated A/C circuit with new 8-position subpanel to provide adequate electrical capacity for air conditioning system. Routed electrical wiring through attic space and between floor joists, securing cables properly to structural members while maintaining code-compliant clearances. Completed all connections, verified proper circuit operation, and ensured installation met current electrical standards.
Completed preventive maintenance inspection on 14-year-old residential generator unit. Performed visual inspection of all accessible components including cooling system, fuel lines, mounting hardware, and electrical connections. Verified proper operation of control mechanisms and documented equipment condition with photographs. All systems found to be functioning within normal parameters with no immediate service needs identified.
Responded to service call for malfunctioning Nelsen water softener system displaying error code and flashing display. Upon arrival, inspected the unit and found the system showing 1121 gallons of remaining capacity on the digital control head. Diagnosed electrical power supply issue causing the intermittent flashing condition. Tested system connections, verified proper operation of the control valve, and confirmed water flow through the copper supply lines. Reset the control head programming to restore normal operation. System tested and returned to full working order with proper regeneration cycle functionality.
Responded to service call for 9-year-old AC unit making loud banging/rattling noise. Upon inspection, found condenser fan motor heavily contaminated with organic debris including dried grass clippings, leaves, twigs, and plant material that had accumulated through the top grille and around the motor assembly. Debris buildup was causing fan blade obstruction and creating the reported noise. Removed contaminated fan motor from unit, cleared all organic material from condenser cabinet and fan assembly, and cleaned top grille of accumulated debris. Inspected motor bearings and mounting hardware for damage caused by debris interference. Unit restored to proper operation with noise eliminated.
Responded to no cooling complaint on multiple 10-year-old air conditioning units. Upon inspection, discovered significant water accumulation inside HVAC cabinet and extensive corrosion on copper refrigerant lines and plumbing components. Standing water on unit floor indicated drainage system failure, with heavy staining on metal panels suggesting chronic moisture intrusion and possible secondary drain line blockage. Evaporator coil area showed debris accumulation and oxidation damage to copper piping connections. Documented severe corrosion throughout system components including rust on fittings and greenish patina on exposed copper. Water damage and deteriorated condition of refrigerant lines indicated system requires immediate attention to restore cooling functionality and prevent further damage to equipment.
Responded to service call for leaking 19-year-old Bradford White automatic storage water heater. Upon inspection, confirmed active leak from aging unit installed in 2018. Documented condition of water heater including manufacturer specifications, safety labels, and surrounding copper supply piping with visible oxidation. Given the age and condition of the unit, recommended replacement to prevent further water damage and ensure reliable hot water service.
Responded to service call for two leaking shower fixtures and sewer odor emanating from bathroom shower drain. Inspected chrome-plated shower control valve and tub spout assembly, examined drain cover and trap system, and documented existing conditions. Identified potential issues with fixture seals and drain trap requiring further diagnostic work to resolve leaks and eliminate sewer gas infiltration.
