Trusted HVAC, Plumbing & Electrical Services in Macedonia, OH

# Plumbing Service - Sold Repair Summary Successfully installed a new 40-gallon Bradford White water heater with 6-year manufacturer warranty, including a new ball valve, thermal expansion tank, and gas line modification to relocate the fireplace tee above the water heater shutoff valve. ## Work Performed Removed existing water heater and prepared the installation area in the basement utility space. Installed the new 40-gallon Bradford White residential water heater in compliance with manufacturer specifications and local plumbing codes. Connected a new cream-colored thermal expansion tank to the cold water supply line using copper piping and brass fittings. The expansion tank was properly mounted and secured above the water heater unit to manage thermal expansion and protect the system from excessive pressure buildup. Installed a new ball valve on the water supply line to provide proper shutoff capability for future maintenance and emergency situations. All water connections were

# Service Summary Completed scheduled furnace tune-up maintenance visit confirmed for 8am arrival. Performed standard seasonal inspection and servicing of heating system to ensure optimal performance and efficiency for upcoming heating season. # Work Performed Conducted comprehensive furnace tune-up including visual inspection of all accessible components. Verified proper air filter installation and condition - filter found to be clean and correctly seated within the return air housing with secure mounting. Inspected furnace cabinet access and surrounding work area. All system components accessible and operational at time of service. Equipment found in satisfactory working condition with no immediate repairs required. Standard preventive maintenance procedures completed per manufacturer specifications.

# Plumbing Service Report ## Service Summary Responded to toilet repair request at 32-year-old residential property. Diagnosed and addressed internal tank component deterioration and mineral buildup affecting flush performance. ## Work Performed Upon arrival, conducted visual inspection of toilet fixture and internal tank components. Removed tank lid to assess flush mechanism condition. Found significant mineral deposits and rust-colored sediment accumulated on tank floor, indicating corrosion of metal components and water quality issues. Water in tank exhibited brownish discoloration consistent with iron content or deteriorating internal hardware. Inspected flush valve assembly with float ball and chain mechanism, noting age-related wear on black plastic components. Examined fill valve and overflow tube assembly for proper operation. Identified corroded metal hardware within tank requiring attention to prevent future leaks and ensure reliable flushing action. Verified water suppl

Conducted HVAC system assessment of existing furnace unit installed in utility closet. Inspected aging system components including ventilation, PVC drainage pipes, and connections. Provided comprehensive replacement estimate for complete HVAC system upgrade based on current equipment condition and household requirements.

Performed scheduled BS-MVP Heating maintenance visit. Inspected blower wheel assembly, which showed normal dust accumulation on the metal blades but remains in proper operating condition. Used diagnostic probe to test system functionality; all components operating within specifications.

Completed replacement of waste and overflow with new lift and turn style, and installed new Moen single-handle tub/shower valve. Installation included adding shut-off valves on water lines in the access panel for improved serviceability, with all new components properly connected to existing PVC and copper supply lines.

Responded to service call for 2012 water heater with declining hot water output. Inspection revealed deteriorated insulation around water heater pipes with visible damage at pipe penetration points, exposing underlying fiberglass insulation. Repaired pipe insulation and performed maintenance service to restore proper hot water functionality.

Completed installation of a Navien NPE tankless water heater to replace the existing 50-gallon Rheem power vent unit. Mounted panel board, connected to existing water and gas lines, and installed fresh air intake to current PVC exhaust pipe. Added required access panels in soffit for strapping and fitting access, with exhaust routed through soffit and exiting the rear of the house east of the outside faucet.

Installed new laundry faucet on basement utility sink by cutting existing copper supply lines and rebuilding with new brass hose bibs. Added dedicated laundry connections and installed ball valve for front sillcock as quoted, completing the comprehensive plumbing update to address aging fixtures and ensure proper water control.

Performed routine MVP furnace maintenance and installed a new water panel for humidification system. Inspected air filtration components and secured filter assembly with proper vertical strapping. Noted water staining on basement floor beneath unit, potentially indicating previous condensate drainage issues.

Performed scheduled MVP heating maintenance service. Conducted pressure testing of the system using UEI EMT20 digital manometer, with readings measuring at 34.69. All diagnostic parameters within normal operating range.

Responded to a no-cooling service call for a newly installed air conditioning system under warranty. Conducted diagnostic assessment of the outdoor condenser unit and electrical connections. Identified and resolved PCB (printed circuit board) issue that was preventing system startup, restoring proper operation to the unit. Unit is now functioning correctly with all connections properly secured.

Conducted an on-site assessment for tankless water heater installation in a 36-year-old residence. Evaluated existing plumbing infrastructure, including copper supply lines, PVC drainage pipes, and current water heater system. Noted significant aging of components with visible mineral deposits and deterioration around pipe penetrations, which will require remediation during installation. Documented expansion tank condition and available utility connections for proper sizing and placement of new tankless unit.

Investigated continuous water leak causing high usage. Located two sources of leakage: malfunctioning toilet and laundry sink with improperly functioning shut-off valves in basement. Inspected water heater system for potential contribution to the issue; no leaks detected there.

Assessed leak issue at a tub drain with suspected caulking failure after customer opened ceiling access panel. Inspected the copper supply lines and brass valve assembly, which showed normal oxidation, as well as the PVC drain components. Identified and repaired the source of water intrusion at the drain-tub connection.

Performed annual heating tune-up on 4-year-old system. Inspected components using precision tools and verified proper operation. Noted this is the final maintenance under current plan which has expired; customer will need to renew service agreement for upcoming AC maintenance.

Replaced deteriorated kitchen drain piping in crawlspace, cutting cabinet access point to properly install new PVC trap assembly. Installed approximately 35' of new PVC piping to replace existing horizontal run, connecting to the existing ABS drain line to restore proper drainage function.

Performed routine maintenance on 5-year-old gas furnace for MVP customer. Inspection revealed significant ice buildup on evaporator coils indicating possible defrost cycle failure or refrigerant leak. Cleaned heat exchanger and inspected finned surfaces for proper operation.

Completed standard furnace tune-up service including inspection of blower wheel assembly and motor. Both components showed no signs of damage or excessive wear. Motor connections and wiring were verified to be secure with proper terminal connections intact.

Performed comprehensive furnace maintenance on 10-year-old system under VIP program. Inspected and cleaned blower assembly, verified proper operation of circuit board and electrical connections, and discussed WiFi thermostat options for remote temperature monitoring when customer is away from home.