Blind & Sons: Trusted HVAC, Plumbing & Electrical Services in Massillon, OH

Responded to service call for continuously running toilet. Upon inspection, found mineral buildup affecting the flush valve assembly and fill valve mechanism. Replaced faulty components and adjusted water level to resolve the issue. Toilet now functioning properly with no leaks or continuous running.

Responded to water leak complaint in basement. Inspected washing machine connections and water meter installation. Found deteriorating pipes adjacent to washing machine with visible moisture damage on surrounding wall. Repaired leaking pipe connection at water meter which was causing water intrusion into basement. System tested and confirmed proper operation with no further leakage.

Responded to service call for main line leak. Inspected water main system where aging copper pipes showed significant oxidation and corrosion at connection points. Repaired leaking section of pipe and replaced deteriorated valve to restore proper function and prevent further water damage.

Performed routine maintenance service on customer's furnace. Replaced existing dirty air filter with new filter provided by our company. Inspected Aprilaire humidity control, which was functioning properly at 28% relative humidity.

Conducted comprehensive inspection of two existing HVAC systems for potential replacement with zoning capabilities. Systems include Lennox furnace units with associated galvanized sheet metal ductwork, flexible connections, and ventilation components. Evaluation focused on upgrading both systems while maintaining compatibility with existing infrastructure. Prepared estimate for complete replacement including necessary electrical work scheduled for follow-up.

Responded to emergency call for burst pipe in 40-year-old residence. Diagnosed and repaired damaged plumbing components under sink, including replacement of compromised PVC/ABS drain assembly and installation of new P-trap. Verified proper water flow and drainage with collection vessel to ensure complete resolution of leak.

Performed scheduled MVP maintenance heating service that was rescheduled from January 8th. Inspected electronic control components, specifically the SECO module, and checked connections. Serviced wiring connections and mounting hardware showing signs of oxidation. All components were properly secured and system functionality verified after service.

Performed diagnostic assessment on generator that was stuck in the "off" position. Identified two critical issues: 1) insufficient clearance due to elevated base installation, and 2) deteriorated main power cable to residence with exposed conductors and cracking insulation. Inspected control module connections and indicator systems, confirming operational status of power supply components.

Responded to service call for intermittent pilot light failure on tanked water heater. Diagnosed issue related to recent temperature drop affecting draft in the metal vent pipe system. Cleaned thermocouple, adjusted pilot assembly, and verified proper venting configuration to ensure consistent operation. Recommended monitoring performance during cold weather conditions.

Responded to customer callback regarding persistent furnace issue from previous January repair. Inspected air handling unit, focusing on the blower assembly and filtration system. Found no visible issues with the filter mesh or blower components. Will dispatch senior technician as requested by customer to thoroughly diagnose recurring malfunction with the MVB/NAT PCB system.

Repaired leaking copper pipes under kitchen sink that showed significant corrosion at connection points and had caused water damage to surrounding wall and floor tiles. Replaced damaged section of copper supply lines and installed new fittings after shutting off water at main valves in basement ceiling.

Performed scheduled MVP heating maintenance on 2-year-old Lennox furnace system. Conducted comprehensive inspection using hex key to access internal components. System operating within normal parameters; all connections and PVC venting properly secured. No issues identified.

Responded to service call for clogged toilet with sewage backup into bathtub. Visual inspection revealed significant sewage backflow in shower stall with contaminated water accumulation. Accessed plumbing access point and cleared main line blockage, restoring proper drainage throughout bathroom fixtures and eliminating cross-contamination between waste lines.

Performed standard MVP furnace maintenance service. Inspected blower wheel, gas valve assembly and wiring connections for proper operation. Replaced dirty air filter with new one to ensure optimal system performance and air quality.

Performed scheduled MVP furnace maintenance that had been rescheduled from previous date. Replaced worn igniter component and inspected blower motor assembly for proper operation. System now functioning correctly with all safety checks completed.

Removed toilet to access main drain line as standard 25-foot snake was insufficient to clear significant clog. Utilized extended snake to successfully clear blockage. Inspection of plumbing infrastructure revealed exposed wooden framing with PVC piping and compromised insulation requiring attention.

Responded to service call regarding water accumulation under newly installed furnace. Inspection revealed furnace was elevated on concrete blocks as a temporary solution. Identified and documented moisture issue with photos of the equipment base and PVC condensate line connection. Further investigation needed to determine source of water and implement permanent resolution.

Completed installation of two new circuits to the garage using a tandem 20 Eaton breaker to separate the electrical load. Circuits were routed through the panel room into the garage and fished up into the attic. Installed new outlets including a two-gang box for the freezer, outlets on the back center and left walls, exterior outlets by the garage door, and prepared wiring for a future post light. Additionally installed an outdoor outlet on the exterior wall near the gas meter, originating from the trophy room circuit.

Performed routine maintenance on 10-year-old Lennox heating system. Inspected furnace components, ductwork, and connected humidifier/air purification system. All systems functioning properly after service completion.

Responded to a main line repair call for a 10-year-old home experiencing plumbing issues due to settlement in the line. Installed new color-coded PEX piping system with appropriate mounting brackets throughout the utility area, including vertical blue and red supply lines. Connected the new piping to the water treatment system consisting of a wall-mounted filtration unit and dual tank softener system, ensuring proper pressure regulation through installed brass valves and backflow prevention components.