Trusted HVAC, Plumbing & Electrical Services in Medina, OH

Provided free second opinion quote for ceiling fan installation in family room. Assessed existing electrical infrastructure and mounting location to determine installation requirements. Room was in active renovation phase with painting preparation in progress.

Completed comprehensive electrical assessment for standby generator installation at 50-year-old residential property with no existing backup power system. Evaluated current Square D load center and main electrical service panel to determine capacity and compatibility requirements for generator integration. Documented existing circuit breaker configuration, main breaker specifications, and available panel capacity through photographic inspection. Provided detailed estimate and quotation for complete standby generator installation including necessary electrical connections, transfer switch integration, and code-compliant wiring modifications required to accommodate new backup power system.

Responded to no power condition at residential property where utility company identified fault in one of the power legs from road to home. Inspected electrical service entrance, meter base, and Generac whole home generator transfer switch system to assess extent of issue and confirm generator was operating properly to maintain power to residence. Documented existing electrical infrastructure including transfer switch, meter housing, conduit connections, and backup power system configuration; advised homeowner that utility company must repair incoming power leg fault before normal electrical service can be restored.

Conducted on-site electrical assessment for Generac generator installation. Evaluated unfinished basement area with exposed floor joists and concrete block foundation walls to determine optimal equipment placement and electrical routing. Inspected existing utility infrastructure including water meter and copper supply lines to identify potential conflicts with proposed generator transfer switch and electrical panel connections. Documented structural conditions, available clearances, and existing PVC plumbing runs to ensure code-compliant installation pathway for generator feeder cables and gas supply lines. Assessed electrical service entry point and determined feasibility for automatic transfer switch integration with existing electrical distribution system.

Responded to service call for fallen ceiling electrical box that was not rated for ceiling fan support. Removed damaged non-rated box and installed fan-rated expandable bar box secured between ceiling joists. New box properly braced to support ceiling fan fixture weight and operation. Completed installation with flush-mounted light fixture in place and verified secure mounting and electrical connections.

Conducted on-site electrical assessment for Generac and Kohler generator installation estimate. Inspected existing electrical service panel to evaluate capacity and compatibility for generator integration, documenting current breaker configuration, wire sizing, and available knockout entry points for transfer switch connections. Photographed electrical panel interior showing circuit breaker arrangement, bus bar assembly, incoming service conductors, and branch circuit wiring to determine appropriate generator sizing and transfer switch specifications for seamless backup power integration.

Completed full kitchen sink replacement and plumbing system upgrade. Removed existing sink and installed new Allen + Roth 33"x22" single bowl drop-in sink with black finish. Mounted and connected customer-supplied matte black faucet with coiled hose attachment, including installation of new shut-off valves and supply lines. Installed new black garbage disposal with matching disposal mount and electrical connection. Replaced all under-sink plumbing with new trap assembly and PVC drainage components. Drilled new drain line penetration through cabinet base as needed. In basement, removed existing rubber sand tee from 1-1/2" copper drain line and re-plumbed connection to vent stack using new PVC piping to ensure proper drainage and code compliance. All components tested and verified operational upon completion.

Responded to callback on 28-day-old Lennox installation experiencing loud banging noise upon startup. Diagnosed unit settling and pad instability as root cause of mechanical noise. Leveled and stabilized condenser unit using handjack tool, added gravel base material beneath existing concrete blocks and black composite pad to eliminate movement and ensure proper drainage. Verified unit operation with no abnormal sounds, confirmed level installation and secure mounting. System operating within normal parameters.

Completed MVP cooling maintenance visit on 9-year-old Lennox HVAC system. Performed comprehensive inspection of furnace and air handler components, removed access panel to evaluate internal electrical connections, control board, and wiring harnesses which were found to be in normal operating condition. All mechanical and electrical components inspected and confirmed functioning properly with no visible signs of damage or wear requiring immediate attention.

Responded to water leak emergency originating from black PVC pipe with visible pooling on floor. Accessed plumbing system through wall opening to locate leak source at pipe connection. Installed new shut-off valve assembly at water supply line beneath kitchen cabinets, including chrome quarter-turn valves with oval handles mounted in recessed outlet box. Connected flexible supply line to new valve installation. Tested system for proper operation and verified no active leaks at connection points. Restored wall access panel and secured all plumbing connections.

Releveled Generac PowerPact backup generator unit that had settled unevenly on its concrete pad. Transported decorative gravel from shop to site and installed gravel base beneath and around generator to ensure proper leveling and drainage. Verified unit was stable and level after adjustment to prevent operational issues and maintain manufacturer specifications.

Completed preventive maintenance cooling visit on HVAC system. Performed electrical diagnostics using clamp meter, recording amperage reading of 37.7 amps on system components. Inspected and evaluated air filter condition, which showed standard accumulation consistent with normal operation.

Completed preventative maintenance cooling visit on Lennox split system (2-4 years old). Inspected indoor air handler unit in basement and outdoor condensing unit, verified all components operating within normal parameters. System found in good working condition with no issues identified; all labels, wiring, and connections properly secured and functioning as designed.

Completed preventive maintenance cooling visit on 10-year-old Trane air conditioning system. Performed standard inspection of outdoor condenser unit, verified fan operation and protective grille integrity, checked heat exchanger coils, and documented equipment condition with no issues identified. Unit operating within normal parameters.

Completed BS-MVP cooling maintenance visit on 8-year-old system. Performed comprehensive inspection of Lennox furnace and connected HVAC components, verified proper operation of Aprilaire humidifier integration, and assessed ductwork connections. Measured and documented ambient temperature reading of 78.0°F in attic space to verify system performance and airflow efficiency.

Completed scheduled MVP cooling maintenance visit on 10-year-old air conditioning system. Performed comprehensive inspection of outdoor condenser unit and indoor air handler, checking refrigerant levels, electrical connections, and overall system operation. Verified proper airflow, cleaned coils as needed, and confirmed all components functioning within manufacturer specifications.

Completed comprehensive AC tune-up on rooftop unit. Performed visual inspection of condenser unit exterior, verified proper operation of fan motor and compressor, checked refrigerant lines and connections for leaks, and inspected electrical components and control board inside air handler. All systems operating within normal parameters with no issues identified.

Responded to service call for loud noise complaint on 2-year-old Lennox air conditioning unit. Upon arrival, performed complete system inspection of outdoor condensing unit and electrical disconnect. Conducted operational test and noise diagnostic to identify source of abnormal sound. Inspected condenser fan motor, fan blades, and compressor for mechanical issues. Checked all mounting hardware, refrigerant line supports, and unit leveling on pad. Verified electrical connections at disconnect box and unit. System photographed and documented showing unit properly installed on composite pad with secure wall-mounted disconnect. All components found in good operating condition with no visible damage or wear concerns noted during inspection.

Completed scheduled MVP cooling maintenance visit on residential air conditioning system. Performed comprehensive inspection of outdoor condenser unit, verified proper operation of all components, and documented equipment condition through photographs. Unit found in good working order with adequate airflow through louvers, clean coil surfaces, and proper clearance from surrounding landscaping.

Completed scheduled MVP cooling maintenance on 15-year-old Bryant air conditioning system. Performed comprehensive system inspection, verified operational parameters, and documented supply air temperature at 53°F. Unit operating within normal specifications with no deficiencies noted at time of service.