Trusted HVAC, Plumbing & Electrical Services in Munroe Falls, OH

Conducted comprehensive HVAC system evaluation in residential basement mechanical room. Inspected existing furnace unit showing visible corrosion and rust discoloration on burner assembly and internal components. Documented current system configuration including PVC venting, drainage systems, and galvanized ductwork displaying age-related wear and dust accumulation. Photographed equipment condition to support replacement estimate recommendations for aging HVAC system.

Replaced the master bathroom toilet with a new American Standard Cadet Pro elongated model featuring a slow-close seat. Removed the existing corroded metal closet flange and installed a new clam-style flange to ensure proper sealing and secure mounting. The old flange exhibited significant rust and corrosion from water exposure, requiring complete replacement to prevent future leaks and ensure stable toilet installation.

# Geothermal Cooling System Diagnostic and Inspection Responded to service call for cooling issue on five-year-old geothermal heat pump system. Upon arrival, performed comprehensive system diagnostic to identify source of cooling malfunction. Removed access panel to inspect internal electrical components and control board assembly. Visually examined all wire connections, harnesses, and electrical terminations for signs of loose connections, corrosion, or damage. Control board and electrical components appeared intact with proper wire routing and secure connections. Inspected heat exchanger coil assembly and refrigerant lines for potential issues. Examined copper tubing connections and coil condition, noting some discoloration consistent with normal system age. Checked drain pan and condensate management system, observing accumulated dust and debris typical of equipment requiring routine maintenance. Inspected flexible ductwork connections and verified proper securing with fasteners.

Installed two new basket strainers with complete tubular drain assemblies beneath dual lavatory sinks. Reworked existing drain system to incorporate an air admittance valve, ensuring proper venting and drainage performance. Replaced two lavatory faucets with new fixtures, including installation of new shut-off valves for both hot and cold water supply lines. All connections were tested for proper operation and leaks upon completion.

Completed installation of a 90% efficiency furnace with new flue piping system, air conditioning unit, and whole-house AprilAire humidifier in basement utility area. Installed humidifier on main supply ductwork with proper water supply line connections using copper tubing and shut-off valve for maintenance accessibility. Configured all ductwork connections and verified proper airflow integration between furnace, AC system, and humidification components to ensure optimal system performance and efficiency.

Completed estimate for replacement of 25-year-old residential air conditioning system. Unit was found to be low on R22 refrigerant with leaking motors. Due to the age of the equipment and the phase-out of R22 refrigerant, replacement was quoted rather than repair. Customer to confirm decision on proceeding with new system installation.

Completed toilet replacement in 40-year-old residential property. Removed existing two-piece toilet fixture from powder room with burgundy walls and beige ceramic tile flooring with decorative border trim. Disconnected water supply line and unbolted toilet from floor flange. Hauled away old toilet per customer request. Inspected floor flange and wax ring seat for proper condition. Installed customer-supplied white porcelain two-piece toilet with chrome flush handle. Secured unit to floor flange with new closet bolts and wax ring seal. Reconnected water supply line and tested for proper flush operation and leak-free connections. Verified proper bowl water level and tank refill function. Cleaned work area and confirmed satisfactory installation with customer.

Completed MVP cooling maintenance visit on 3-year-old split system with basement air handler and outdoor heat pump unit. Performed electrical diagnostics on heat pump using clamp meter, recording 6.5 amp draw at outdoor unit while inspecting contactor, control board connections, and refrigerant lines. Accessed horizontal air handler in basement, inspected blower motor assembly, electrical connections, and condensate drainage system. All components operating within normal parameters with easy access confirmed for future service visits.

Completed comprehensive tune-up on 20-year-old residential air conditioning system, including outdoor condensing unit and indoor air handler located on lower level. Performed full system inspection with detailed documentation of blower motor assembly, copper windings, refrigerant lines, and electrical connections. Replaced air filter and verified proper operation of all mechanical and electrical components within the HVAC system.

Completed installation of 80% efficiency furnace and air conditioning system. Evacuated refrigerant lines using digital vacuum gauge to ensure system achieved proper vacuum levels below 500 microns, verifying system integrity and absence of leaks or moisture contamination. Successfully commissioned complete HVAC system with all components operating within manufacturer specifications.

Responded to no cooling complaint on 7-year-old Payne PA13NA024-B air conditioning system. Found outdoor unit running with condenser fan operational but system not producing cold air throughout residence. Performed diagnostic evaluation of electrical components including contactor and dual capacitor. Inspected refrigerant circuit and determined system had lost refrigerant charge. Identified leak, performed repairs, evacuated system, and recharged with proper amount of R-410A refrigerant to manufacturer specifications. Verified proper amperage draw, temperature split, and system operation upon completion with unit cooling effectively.

Completed comprehensive tune-up service on 8-year-old residential air conditioning system. Performed full system inspection including visual examination of evaporator coil assembly, verified proper airflow through intake filter, and assessed control board operations with all electrical connections and wiring harnesses found secure and functioning within normal parameters. All components operating efficiently with no immediate service concerns identified.

Removed existing leaking water heater and installed new Bradford White 40-gallon residential water heater with 6-year manufacturer warranty. Unit was positioned in water pan and lowered to appropriate height to utilize existing ball valve. Added thermal expansion tank to system and ran drain line from water pan to floor drain in mechanical room. Eliminated sharkbite fitting on hot water side and properly tied back into existing copper water line using permanent connections. All connections tested and verified leak-free upon completion.

Replaced a non-functional tanked water heater that exhibited severe rust deterioration and corrosion throughout the unit, particularly concentrated at the base and lower third of the tank. Disconnected existing copper supply lines and vent ductwork, removed the failed unit, and installed a new water heater with proper code-compliant connections including hot and cold water lines, temperature and pressure relief valve, and gas supply connections. Tested all connections for leaks and verified proper operation of the new system.

Responded to service call for kitchen sink leak underneath cabinet and replacement of two bathroom sink faucets with matching double-handle fixtures. Inspected kitchen sink plumbing assembly, identified source of leak in drainage system, and performed necessary repairs to P-trap configuration and drain connections. Replaced both existing bathroom vanity faucets with new brushed nickel double-handle units to match customer's aesthetic preference, ensuring proper installation of supply lines and drain assemblies. Tested all fixtures for proper operation and verified no leaks present upon completion.

Conducted site evaluation and provided replacement estimate for 30-year-old residential HVAC system consisting of gas furnace and air conditioning unit. System was originally oil-fired and converted to natural gas, currently operational but nearing end of service life. Inspected outdoor condenser unit with beige metal cabinet and assessed refrigerant line routing along exterior siding. Evaluated indoor furnace installation in utility space and documented existing ductwork configuration. Photographed equipment conditions and system components to support replacement proposal recommendations.

Completed second phase of air conditioning and coil installation. Installed new outdoor condensing unit with R-454B refrigerant system, including proper refrigerant line connections with service valves and brass fittings. Replaced dual 30-amp Limitron fuses in disconnect contactor to ensure proper electrical protection for the system. Verified all refrigerant lines are properly routed and insulated, with unit positioned on protective pad base with proper clearances. System components are operational and ready for startup procedures.

Evaluated 27-year-old air conditioning system with no cooling condition. Diagnosed locked compressor requiring complete system replacement. Documented existing Lennox furnace installation and current HVAC configuration. Provided comprehensive replacement estimate and scheduled follow-up consultation to review equipment options and installation details.

Completed scheduled maintenance visit on a Lennox cooling system as part of recurring service program. Performed comprehensive inspection of both indoor air handler unit in basement mechanical room and outdoor condenser unit, verifying proper operation of all components, checking refrigerant levels, inspecting electrical connections, and cleaning as needed. System found to be operating within normal parameters with no immediate concerns identified.

Performed comprehensive air conditioning tune-up on five-year-old cooling system with no reported issues. Completed full system inspection including electrical disconnect box examination, verified fuse integrity, and assessed all accessible components for proper operation and seasonal readiness. Unit found to be functioning within normal parameters with all safety devices operational.