HVAC, Plumbing, and Electrical Services in Norton, OH

Addressed multiple leaks and corroded piping under kitchen sink by replacing both basket strainers, removing deteriorated trap assembly and installing new trap with two-part tray waste configuration. Installed new wye branch tailpiece for dishwasher connection and performed drain line snaking to ensure proper flow and eliminate any blockages in the system.

Responded to service call for leaking pressure tank in residential well water system. Upon inspection, identified active leak on pressure tank requiring replacement. Removed failed pressure tank, installed new unit, reconnected all plumbing connections, and verified system operation with no leaks detected. Tested water pressure and confirmed proper function of well pump system.

Completed routine MVP heating maintenance visit. Performed system inspection including control board diagnostics and electrical connections verification within the unit's control panel. Inspected and evaluated air filter condition, which showed clean pleated media with proper airflow characteristics.

Completed routine MVP cooling maintenance visit on residential HVAC system located in attic space. Performed comprehensive inspection of horizontal air handler unit, examining evaporator coil which showed moderate accumulation of dust and debris between fins requiring attention. Inspected all mechanical connections, condensate drain lines, ductwork, and electrical components to ensure proper system operation and efficiency for continued cooling performance.

Conducted on-site evaluation of existing 26-year-old furnace system for replacement estimate. Assessed current Lennox Elite Series heating unit installation in basement location, documenting equipment condition, ductwork configuration, venting system with PVC exhaust pipes, electrical connections via armored conduit, gas line routing, and existing plenum assembly to provide accurate replacement specifications and scope of work.

Removed two existing wall switches per customer request and installed customer-supplied smart outlet in residential location. Replaced standard duplex receptacle with programmable smart outlet featuring timer controls and indicator lights, verified proper wiring connections and tested device functionality to ensure proper operation.

Performed comprehensive preventative maintenance tune-up on six-year-old air conditioning system. Conducted thorough inspection of exterior condenser unit, verified all manufacturer specifications and AHRI certification labels, and examined ventilation components for proper airflow and operational integrity. All systems functioning within normal parameters upon completion.

Completed annual maintenance on 3-year-old Lennox furnace and air conditioning system. Inspected evaporator coil filter showing dust accumulation on lower portion, checked all mechanical components, verified proper operation of heating and cooling equipment, and documented system condition with photos. Customer requires MVP renewal at this time.

Responded to callback regarding incomplete duct cleaning service. Upon inspection, discovered significant dust and debris accumulation in previously untouched ductwork sections, with heavy particulate buildup visible throughout rectangular metal duct interiors. Also identified deteriorated conditions in crawlspace access area showing moisture damage and compromised structural components requiring attention during remediation work.

Installed dedicated 240V electrical circuit from main panel to detached garage for EV charger installation. Main 150A panel had no available breaker slots, requiring strategic circuit consolidation to accommodate new 40A double-pole breaker. Ran 8/3 NM-B copper wire approximately 60 feet from panel through attic space to garage location, securing cable per code requirements. Installed NEMA 14-50 receptacle in garage and verified proper voltage, grounding, and circuit functionality. All work completed to current NEC standards for electric vehicle supply equipment circuits.

Completed comprehensive A/C tune-up on 8-9 year old system per seasonal maintenance request. Inspected and documented heavily soiled air filter requiring replacement due to significant dust and debris accumulation. Performed electrical component inspection revealing capacitor and contactor in operational condition, with noted dirt buildup in control panel requiring cleaning for optimal performance.

# HVAC Service Report ## Summary Completed preventive maintenance on a 10-year-old gas furnace under promotional service agreement. System inspected, control board and blower assembly evaluated, with dust accumulation noted on blower housing requiring attention. ## Service Performed Performed comprehensive tune-up and safety inspection on residential gas furnace. Accessed control compartment and evaluated main control board, confirming proper electronic component condition and secure wire connections across all low-voltage and line-voltage circuits. Verified integrity of control board mounting and absence of heat damage or component degradation. Inspected blower assembly and noted moderate dust and debris accumulation on blower wheel housing and surrounding surfaces. Accumulation consistent with normal operation over service interval but sufficient to warrant cleaning for optimal airflow efficiency. Blower wheel blades showed minimal buildup, maintaining structural integrity. Eval

Performed routine maintenance on 4-year-old Lennox gas furnace. Inspected heat exchanger, burners, and ignition system; all components functioning properly. System cleaned and tested for optimal operation.

Conducted a comprehensive generator installation estimate for residential property. Performed electrical panel assessment to determine proper connection requirements and evaluated basement utility area for optimal generator placement with consideration for existing HVAC systems and plumbing infrastructure.

Responded to kitchen sink leak call. Discovered significant corrosion and deterioration at drain pipe connections under sink, particularly at the metal fitting where the PVC pipe enters the sink basin. Replaced damaged components and secured all connections to eliminate leak.

Installed a complete Lennox HVAC system, including a 90% furnace, air conditioner, and humidifier. Properly connected refrigerant lines and electrical components, including installation of appropriate fuses for the system. Completed all necessary connections and verified proper operation of the entire 2410 system.

Performed comprehensive furnace tune-up including inspection of heat exchanger, blower motor, and electrical connections. Examined ductwork system for potential cleaning needs, noting moderate dust accumulation but no significant blockage. Unit is operating within normal parameters after service with all safety systems verified functional.

Performed scheduled furnace tune-up on residential gas furnace system. Inspected condensate drain system for proper operation and verified all PVC exhaust/intake piping connections were secure. Confirmed unit was operating with normal flame pattern and proper electrical connectivity as evidenced by functioning indicator lights.

Performed comprehensive tune-up on 11-year-old furnace including inspection of internal components, wiring, and circuit boards. Conducted diagnostic testing using electronic measurement tools to verify proper system operation. All connections were checked and system was confirmed to be functioning within normal parameters.

Responded to service call for generator reporting overvoltage fault (Error Code 1900). Inspected internal wiring connections and electrical components, focusing on the main control panel where multiple wire harnesses connect. Traced and secured several loose connections in the wiring harness that were causing intermittent voltage fluctuations. Cleared fault code and performed operational test to confirm proper voltage regulation.