Blind & Sons: Full-Service HVAC, Plumbing & Electrical Experts in Ravenna, OH

Responded to service call for furnace leaking issue on unit installed in March. Upon inspection, identified leak in furnace system and photographed installation showing HVAC components including pressure gauges, expansion tank, refrigerant lines, and associated mechanical connections. Documented PCB-related concerns and overall system configuration for further evaluation and repair recommendations.

Converted seven fluorescent light fixtures to LED throughout the basement and kitchen, including five 4-foot fixtures and two 2-foot fixtures, and replaced two under-cabinet lighting units in the kitchen. Multiple service visits were required due to incorrect parts being initially ordered, with the correct components ultimately installed to complete the LED retrofit.

Performed routine maintenance on a two-year-old generator unit. Conducted comprehensive battery testing using diagnostic equipment, which confirmed the battery is in good working condition with acceptable voltage and cold cranking amp readings. Completed standard generator maintenance procedures and verified all systems are operating properly.

Installed dedicated 20-amp circuit for dehumidifier unit in crawl space. Ran new wiring from main electrical panel to crawl space location, installed appropriate circuit breaker, and made all necessary connections per NEC requirements. All work completed to code with proper grounding and circuit protection in place.

Completed installation of dehumidifier unit and wall-mounted heater in residential structure with rustic interior finishes. Unit currently configured for natural gas operation with notation that propane conversion will be required at future date per customer request.

Completed electrical installation warranty inspection following successful approval. Accessed mechanical utility area through floor panel to document required water ground line and bonding connections per inspection requirements. Photographed copper water service piping, grounding electrode conductor connections, and bonding jumpers at water meter location. Documented all bonding connections to metallic water distribution system in accordance with NEC grounding and bonding standards.

Responded to service call regarding a circuit breaker that could not be shut off. Upon arrival, conducted thorough inspection of electrical panel and breaker assembly. Tested the problematic breaker mechanism and verified proper operation of all circuits. Inspected wall switches and outlets throughout the property to ensure proper electrical connections and functionality. All electrical components were found to be operating within normal parameters. No safety hazards or code violations were identified during the inspection.

Completed full rebuild of clock valve head assembly, installing new injectors, piston, and stack assembly components. Necessary replacement parts were ordered from supplier, retrieved for shop staging, and subsequently installed to restore proper valve operation. Work included disassembly of existing valve head, replacement of worn internal components including rubber grommets and metallic cylindrical elements, and reassembly to manufacturer specifications.

Returned to diagnose water splashing issue from evaporator coil into ventilation system. Upon inspection, found severely deteriorated insulation around ductwork and HVAC components in attic space, with material breakdown contributing to moisture management problems. Documented existing conditions showing compromised insulation integrity and recommended repairs to address both the water drainage concern and degraded insulation affecting system performance.

Completed a 150-amp electrical service upgrade with all necessary code updates to meet 2023 National Electrical Code requirements, including installation of an exterior disconnect. Installed whole home surge protection system with digital monitoring capability. Ran a new dedicated 20-amp circuit to the garage for refrigerator operation. Replaced six 3-way switches, two dimmer switches, and one fan control switch throughout the residence. Installed two new light fixtures—one in the sunroom and one in the first-floor hallway. Corrected the dishwasher circuit by reworking the connection and properly placing it on the correct leg of the multi-wire branch circuit to ensure balanced loading and safe operation. All electrical panels were mounted on wooden backing boards with proper wire management, featuring organized color-coded wiring and professional conduit installation. The upgraded system now includes multiple distribution panels with circuit breakers arranged for optimal circuit protec

Responded to service call for water softener continuously draining water at residential property. Upon arrival, confirmed bypass valve had been closed by homeowner to prevent ongoing water discharge. Performed diagnostic inspection of water softener system including control head, valve assembly, and drain line connections. Examined digital control head display for error codes and cycle status. Inspected copper piping, brass fittings, and PEX connections for proper operation and potential leaks. Evaluated pressure regulator and valve components mounted to main water line. Assessed overall system installation including tank condition, plumbing configuration, and control settings. Documented equipment condition with photographs showing control head unit with barcode BNDO4442801, complete piping assembly, and installation setup in basement utility area. Identified malfunction causing continuous drain cycle and performed necessary repairs to restore normal water softener operation. Tested s

Replaced Kohler cartridge on right-side fixture assembly, addressing both hot and cold water control issues on three-piece deck-mounted faucet with white porcelain lever handles. Accessed supply lines through vanity cabinet, installed new cartridge components, and verified proper operation of both temperature control valves. All plumbing connections tested and confirmed leak-free upon completion.

Completed toilet installation in residential bathroom. Positioned and secured new white porcelain toilet unit to existing floor flange and water supply line, ensuring proper seal and level mounting. Verified flush mechanism operation and checked for leaks upon completion.

Completed preventive maintenance on a 4-year-old Lennox air conditioning system. Inspected outdoor condensing unit and indoor air handler, verified proper operation of all components, checked refrigerant lines and electrical connections, and confirmed system is functioning within manufacturer specifications. Customer was contacted prior to arrival as requested, and maintenance visit was scheduled for renewal.

# HVAC Maintenance - Cooling Completed comprehensive MVP cooling maintenance visit on residential Lennox air conditioning system. Performed thorough inspection of outdoor condenser unit and indoor evaporator coil assembly. Indoor coil exhibited significant accumulation of dirt and dust throughout aluminum fin array, restricting airflow and reducing heat exchange efficiency. Opened access panels on evaporator unit to assess coil condition and document maintenance needs through photographic documentation. Inspected outdoor condenser unit positioned on ground-level pad adjacent to structure. Unit surrounded by vegetation, mulch, and debris requiring clearance maintenance. Verified proper clearance around condenser housing and assessed fin condition on exterior heat exchanger. Documented equipment location, surrounding conditions, and accessibility for ongoing maintenance requirements. System operational at time of inspection. Maintenance visit completed per MVP recurring service agreem

Completed preventative maintenance tune-up on a 31-year-old central air conditioning unit located in the backyard. Performed comprehensive system inspection, cleaned condenser coils, checked refrigerant levels, tested electrical connections and capacitors, verified proper airflow, and ensured all components were operating within normal parameters. Unit showed typical age-related wear but continues to function effectively with no immediate repairs needed at this time.

Completed routine air conditioning tune-up and system inspection on residential cooling unit. Performed comprehensive maintenance including electrical disconnect inspection, condenser examination, and operational testing. Noted vegetation overgrowth around outdoor condenser unit and damaged protective cover on electrical disconnect box requiring attention for optimal system performance and safety compliance.

Performed comprehensive tune-up on outdoor heat pump unit. Opened access panel and inspected all electrical components including capacitor, contactor, and control board connections. Verified proper wire terminations and component functionality, documented system condition with photos, and closed unit securely upon completion.

Completed full system replacement under warranty at residential property. Accessed property using provided garage code, removed existing HVAC equipment and installed new system. Verified proper refrigerant charge of R410A using digital manifold gauges, with system pressures reading 121.6 psi on low side and 292.2 psi on high side at operating temperatures of 41°F evaporator and 94°F condenser. Inspected outdoor unit installation including lineset connections, service valves, and electrical conduit routing. Confirmed all copper piping properly insulated and secured on protective pad with appropriate clearances. Documented system performance with photos showing gauge readings and exterior equipment installation. Transported old equipment back to shop for disposal. System operating within manufacturer specifications upon completion.

# HVAC Maintenance - Cooling Completed comprehensive MVP preventive maintenance service on a 6-year-old residential air conditioning system. Upon arrival, accessed outdoor condensing unit and performed thorough inspection of all major components. Opened top access panel to evaluate fan assembly, motor, and internal components for proper operation and wear patterns. Conducted detailed visual inspection revealing accumulated dust and debris on the condenser coil and filter surfaces, consistent with normal seasonal operation. Cleaned condenser coil using appropriate cleaning solution and low-pressure water application to restore optimal heat transfer efficiency. Removed debris buildup from unit interior and surrounding areas to ensure proper airflow and prevent future operational restrictions. Inspected fan motor and blades for proper operation, balance, and secure mounting. Verified fan blade condition and cleaned surfaces to maintain efficient air movement through the coil assembly.