HVAC, Electrical & Plumbing Services in Strongsville, OH

Completed installation of a 90% AFUE gas furnace with 5-ton air conditioning system and condensate pump at residential property. New outdoor condenser unit positioned on rubber isolation pad over existing paver patio adjacent to home's electrical service panel. Installed reversing valve solenoid assembly on air handler unit to enable proper refrigerant flow control. System tested and verified operational with all components functioning within manufacturer specifications.

Completed installation of wireless thermostat and humidistat for new HVAC system. Installed electrical disconnect box with proper safety labeling on ductwork in attic space, ran liquidtight flexible conduit for power connections, and mounted control panel with circuit breakers in mechanical area. All components properly secured, wired, and tested for proper operation per manufacturer specifications and local building codes.

Responded to service call for garage floor drain backup occurring during rainfall, which began after recent gutter replacement. Upon arrival, inspected the exterior drainage system and identified that the new gutter downspout discharge was improperly directed, causing excessive water volume to overwhelm the garage floor drain during steady rain events. Traced the drainage line from the affected garage drain and confirmed the connection point where surface water was entering the system. Cleared debris and organic material from the exterior drain inlet area near the foundation. Assessed the gutter downspout positioning and determined that water was being directed toward the garage drain inlet rather than away from the foundation. Recommended redirecting downspout discharge to prevent future backup issues and ensure proper surface water management away from the drain system.

Responded to service call for clogged toilet drain in residential bathroom. Upon arrival, assessed the shower drain system which showed signs of significant corrosion and buildup on the drain fixture. Utilized professional drain clearing equipment to remove obstruction and restore proper drainage flow. Verified water flow through the drain line and confirmed complete clearance of the blockage. System tested and returned to normal operation with no further drainage issues detected.

Completed full HVAC system installation including outdoor Lennox heat pump condensing unit and indoor air handler. Positioned heat pump on composite pad with proper gravel base for drainage and stability. Installed electrical disconnect box with appropriate conduit routing and grounding per code requirements. All refrigerant lines connected and system tested for proper operation.

Completed on-site evaluation for furnace replacement estimate at residential property. Assessed existing HVAC system including air handler unit located in basement or mechanical room, inspected refrigerant line routing through attic space, and evaluated condensate drainage system with existing pump configuration. Documented current equipment specifications, ductwork connections, and utility routing to provide comprehensive replacement recommendations.

Completed Early Bird tune-up on Lennox outdoor air conditioning unit. Performed comprehensive system inspection, verified dual fuse assembly with Edison brand fuses in proper working condition, and confirmed all electrical components secure and functioning. Unit operating within normal parameters with no issues identified during service visit.

Responded to breaker tripping issue at 80-year-old residential property. Upon inspection, found outdated electrical panel with disorganized wiring and multiple code violations typical of older installations. Identified overloaded circuit as primary cause of nuisance tripping. Redistributed loads across available breakers, secured loose wire connections, and organized interior wiring to improve airflow and accessibility. Tested all circuits under load to verify proper operation and recommended future panel upgrade to meet current electrical demands and safety standards.

Responded to report of exposed live wire in backyard of residential property over 20 years old. Upon arrival, conducted thorough assessment of the outdoor area and located the hazardous wiring. Verified electrical current was present and posed safety risk. De-energized the circuit at the breaker panel, safely capped the exposed conductors using approved wire nuts and weatherproof junction box rated for outdoor use, and secured all connections per NEC standards. Documented conditions with photographs for record-keeping purposes.

Conducted comprehensive HVAC system evaluation for complete equipment replacement at residential property. Assessed existing Carrier brand condensing unit positioned on exterior concrete pad with proper electrical disconnect and refrigerant line routing, as well as indoor air handling equipment in basement utility area. Documented current system configuration, equipment specifications, and installation conditions through detailed photography to provide accurate replacement estimate for new heating and cooling system.

Responded to service call for intermittent moaning sound occurring before blower motor engagement on 3-year-old Carrier furnace unit. Upon inspection, diagnosed worn blower motor bearings causing the noise issue. Lubricated blower motor bearings, tested system through multiple heating cycles to verify proper operation, and confirmed elimination of abnormal sounds. Unit now operating within normal parameters with smooth blower engagement.

Conducted replacement estimate for approximately 18-year-old residential HVAC system in single-family home. Evaluated existing Carrier furnace and air handler installation in basement utility area, documented current equipment configuration including vertical stacking arrangement, PVC condensate drainage, and ductwork connections. Photographed system components and provided replacement recommendations based on equipment age and condition assessment.

Completed scheduled MVP heating maintenance visit. Performed comprehensive inspection of indoor HVAC unit components including evaporator coils, refrigerant lines, electrical connections, and blower assembly. Verified all coil fins were clean and free of debris, confirmed proper wire connections at terminal block, and inspected flexible drainage hose for proper operation. All system components found in good working condition with no issues identified.

Completed kitchen sink upgrade including installation of new faucet, drain piping assembly, and garbage disposal unit under the kitchen sink. Replaced two exterior hose bibs (sillcocks) on the building's exterior wall. All plumbing connections tested and verified leak-free upon completion.

Completed annual preventative maintenance on one-year-old Lennox furnace and air conditioning system. Performed comprehensive inspection of blower motor assembly, gas valve components, electrical connections, and combustion chamber; verified all wiring harnesses secure and properly routed; confirmed system controls and safety switches operational. All components found in good working condition with no issues identified.

# Plumbing Service Completed Responded to service call for multiple plumbing issues including intermittent upstairs shower drain clogging, inadequate hot water supply during showers, and cold water problems in the basement utility area. Upon inspection, assessed water heater condition and functionality in basement mechanical room, examining copper supply lines, pressure relief valve, and thermostat controls. Evaluated utility sink drainage system and inspected plumbing fixtures throughout the property to identify root causes of reported issues and determine appropriate corrective measures.

# Shower Faucet Replacement - Two Bathrooms Replaced obsolete shower faucets in two bathrooms due to discontinued cartridge availability. Removed existing bronze-finished valve assemblies and installed new chrome shower control valves with matching tub spouts and diverters. Work included minor drywall access and repair to accommodate new fixture installation, ensuring proper wall mounting and watertight seals. All fixtures tested and confirmed operational upon completion.

# HVAC Service Report - Heat Pump Annual Maintenance Performed comprehensive annual tune-up on 8-10 year old outdoor heat pump system. Inspected heavily soiled air filter showing significant dust and debris accumulation with rust-colored staining in lower center section, indicating extended use beyond recommended replacement interval. Examined system control board displaying operational status code "4" on LED readout, verified proper electrical connections and wiring integrity across multiple circuit terminals and relay points. All electronic components, terminal blocks, and control circuits functioning within normal parameters at time of service.

Responded to service call for recurring drain blockage affecting main bathroom fixtures (toilet, tub, sink). Inspected system and discovered severely corroded floor drain with significant mineral buildup causing restricted flow. Cleared blockage and advised customer on preventative maintenance options to avoid future clogs.

Replaced leaking outdoor spigot on 49-year-old home, requiring removal of Tyvek house wrap to access fixture. Installed new brass valve assembly with proper copper pipe connections and verified water flow with no leaks before completing the job.