Air Conditioning, Heating, Electrical & Plumbing Services in Uniontown, OH

Diagnosed furnace that was repeatedly shutting down and requiring breaker reset. Inspected control board and wiring connections, finding several loose wire terminals at the circuit board which were causing intermittent operation. Secured all electrical connections and verified proper operation through multiple test cycles.

Performed standard MVP heating system maintenance service, inspecting the water supply plumbing components including the copper pipe with blue shut-off valve and insulation. Examined the control circuit board for proper operation, verifying all wire connections (white, yellow, blue, green, pink, and black) were secure and that electronic components showed no signs of damage or failure.

Performed annual furnace maintenance check. Inspected system pressure gauges and verified proper operating parameters. Rescheduled remaining service for 02/27/26 at customer's request.

Completed scheduled BS-MVP Heating Visit on 10-year-old system. Inspected Lennox control module which was operational with proper wire connections and illuminated indicator light. Examined air filter which showed normal usage wear with intact diamond-pattern mesh and frame structure.

Successfully installed a new Lennox furnace unit in the basement, including proper connection of all metal ductwork components and integration with the existing Aprilaire humidifier system. Completed installation with appropriate PVC drainage piping and verified system functionality before concluding the first stage of the job.

Performed annual preventative maintenance visit on a 1-year-old Bryant/MVP heating system. Inspected furnace control board, electrical connections, and ventilation components. System is operating within normal parameters with no issues detected.

Performed routine furnace maintenance service, including inspection of ventilation system and verification of control board functionality. Recommended replacement of air filter (2410-413) which was not on hand during service. Rescheduled for completion at later date.

Performed generator maintenance service including diagnostic battery testing. Installed drainage system with flexible hose connection to ensure proper condensate removal. Generator was successfully serviced and is now operating within normal parameters.

Performed routine maintenance on 3-year-old MVP gas furnace, including inspection of condensate drain system and examination of air intake components. Observed minor dust accumulation around drain base which was cleaned to ensure proper drainage function, and verified integrity of protective mesh covering on ventilation system.

Responded to service call for furnace that was not operating properly. Diagnosed system displaying two error codes, with thermostat showing incorrect temperature readings (displaying 81°F while set to 72°F). Performed maintenance by replacing UV bulb and humidifier pad, resolving the issues and restoring normal operation.

Performed scheduled MVP heating maintenance service. Inspected system and replaced air filter, ensuring proper installation with correct airflow direction. Used hex key to access components and complete comprehensive heating system check.

Performed routine maintenance on 5-year-old gas furnace, including inspection and testing of control board circuitry and electrical connections. Soldering repairs were completed on wiring connections to ensure proper system operation, and ductwork was evaluated for potential cleaning needs.

Performed estimate for replacement of 14-year-old furnace with confirmed heat exchanger crack. Visual inspection revealed unit is installed in utility area with proper duct connections. Recommended full replacement due to safety concerns with failed heat exchanger.

Successfully completed installation of a model 600 humidifier unit on the customer's HVAC system. The installation included proper mounting, connection to existing ductwork, and configuration of the digital control interface. System was tested and is functioning as designed to maintain optimal indoor air quality.

Replaced leaking laundry room spigots with new blue manual shut-off valves. Installed new red valve handles with proper connections to the existing black supply hoses. Tested water flow and confirmed no leaks present after installation.

Successfully replaced customer's 80-gallon electric water heater with a new 50-gallon Bradford White model. Installation included new water shut-off valve, expansion tank, and a 1/2" x 1/4" shut-off valve for the humidifier. System was properly connected to existing plumbing with copper piping and comes with an 8-year warranty.

Performed scheduled maintenance on HVAC system (MVP Heating Visit). Inspected and evaluated furnace components including circuit board, electrical connections, and blower motor. All components functioning properly with no visible damage or deterioration noted. System is operating within normal parameters.

Performed scheduled maintenance on 2-year-old gas furnace (MVP model). Inspected and replaced pleated air filter. Examined interior electrical components including circuit board, wiring harness, and blower assembly, confirming all connections secure and functioning properly. System operating within manufacturer specifications.

Installed new dedicated electrical outlet for water softener in storeroom. Troubleshot existing non-functional outlet, ran new wiring to panel, and properly secured connection to ensure consistent power supply. System now operational with appropriate electrical service for water treatment equipment.

Conducted comprehensive evaluation of customer's existing electrical panel for exterior home lighting installation project. Inspected two circuit breaker panels: primary GE panel containing approximately 20-24 breakers (primarily 15A) and secondary panel with associated wiring infrastructure. Assessment completed to determine capacity and requirements for proposed exterior lighting system.