Your Trusted HVAC, Plumbing & Electrical Experts in Wadsworth, OH

Replaced customer-supplied light fixture in utility room. Installed new ceiling-mounted fixture with bronze finish and frosted glass dome, ensuring proper electrical connections and secure mounting to ceiling junction box.

Upgraded existing outdoor electrical outlet to support pool equipment at a 20-year-old residential property. Assessed current electrical configuration and determined appropriate circuit requirements for safe pool operation. Installed weather-resistant GFCI-protected outlet meeting NEC standards for outdoor and wet location applications. Verified proper grounding and circuit protection to ensure safe operation of pool equipment and compliance with current electrical codes.

Completed seasonal AC tune-up on outdoor condensing unit. Performed standard maintenance inspection including checking refrigerant levels, cleaning condenser coils, testing electrical connections, and verifying proper system operation. Installed complimentary carbon monoxide detector as part of promotional service package.

Conducted site evaluation for residential standby generator installation. Assessed exterior location near existing HVAC equipment, confirmed adequate clearance from landscaping and building structure, verified HOA compliance based on existing generators in neighborhood, documented installation area with photographs, and coordinated arrival time with customer.

Responded to no-cooling complaint on recently installed Lennox system. Upon arrival, verified outdoor condensing unit was running but home was not reaching set temperature. Inspected electrical connections at disconnect box, refrigerant line set routing, and condensate drainage. Checked unit operation and confirmed compressor engagement. Identified issue with thermostat communication preventing proper system cycling. Corrected wiring at control board, tested system through complete cooling cycle, and verified proper airflow and temperature differential. System now cooling properly and maintaining setpoint.

Provided comprehensive estimate for replacement of 13-year-old gas furnace with cracked heat exchanger and air conditioning system with low refrigerant due to stuck Schrader core valve. Documented existing equipment condition in basement mechanical room and exterior condenser unit location. Presented options for complete HVAC system replacement to address multiple critical component failures requiring extensive repairs.

Completed preventive maintenance visit on Trane condensing unit at residential property. Performed standard cooling system inspection including visual assessment of outdoor unit condition, verified proper clearances around equipment, and documented unit operation. Unit appeared functional with normal wear consistent with outdoor installation, surrounded by adequate airflow space despite minor vegetation growth at base requiring future monitoring.

Conducted electrical estimate for 200-amp panel upgrade in basement. Evaluated existing electrical panel mounted on wooden board against concrete block wall, assessed current breaker configuration and wire routing through ceiling joists, and inspected exterior meter base and service entrance equipment. Provided comprehensive assessment and pricing for complete service upgrade including new 200-amp main panel, proper grounding, and code-compliant installation.

Completed scheduled air conditioning maintenance on 8-year-old Bryant HVAC system under MVP agreement. Performed comprehensive inspection of furnace/air handler unit, verified proper operation of all components, checked refrigerant lines and connections, inspected ductwork connections, and tested system controls. All equipment found operating within normal parameters with no deficiencies noted.

Performed complete flush and fill service on a 40-gallon Bradford White natural gas water heater (Model MI40T6FBN). Drained sediment buildup from tank, refilled system, and conducted comprehensive maintenance inspection of all plumbing connections, gas supply lines, temperature and pressure relief valve, and venting components to ensure proper operation and safety compliance.

Replaced failed 40-gallon electric water heater in basement due to active leaking that caused significant water damage to concrete floor. Removed existing Kenmore unit and installed new 40-gallon electric water heater with required expansion tank to prevent future pressure-related issues. Connected all electrical and plumbing connections per code, tested unit for proper operation, and verified no leaks at installation points.

Completed routine maintenance on two residential air conditioning units. Inspected Lennox system located in attic space, verified manufacturer specifications and AHRI certification, and documented unit model and serial numbers. Replaced dirty pleated air filter showing significant dust accumulation to restore proper airflow and system efficiency.

Completed HVAC estimate for ductless mini-split system installation in single-family residence with slab foundation and partial basement. Assessed interior spaces including bedroom and kitchen areas to determine optimal placement for indoor air handler units, evaluated electrical requirements, and documented existing HVAC infrastructure including boiler, furnace, and central air conditioning system for integration considerations.

Responded to water leak from 16-year-old hot water tank. Performed on-site inspection and documented existing installation showing active leak conditions. Unit assessed for repair viability versus replacement options, with photographic documentation taken of water heater, plumbing connections, copper piping with brass fittings, insulation condition, and drain pan placement. Quote to be provided for replacement or repair solutions.

Completed comprehensive AC tune-up service on residential cooling system. Evaporator coil exhibited heavy dust and debris accumulation throughout the cross-hatched mesh surface, significantly restricting airflow and reducing system efficiency. Thoroughly cleaned coil to restore proper heat transfer capability and airflow. Inspected electrical components within control panel and identified capacitor with severe corrosion and oxidation on terminals and metal cap, presenting potential failure risk. Recommended immediate capacitor replacement to prevent system breakdown. Verified all electrical connections, tested system operation, and documented equipment condition with photographic evidence for customer records.

Completed installation of a 90% efficiency American Standard furnace and air conditioning system in basement mechanical room. Installed new air handler with proper ductwork connections, PVC venting for condensate drainage, refrigerant line set, and all necessary electrical connections. System tested and verified operational upon completion.

Conducted comprehensive electrical assessment for whole-house rewiring estimate. Inspected existing electrical panel containing dual columns of circuit breakers with main service conductors and distribution bus bars, noting current wiring configuration and capacity. Evaluated utility room mechanical space and HVAC equipment area to determine scope of rewiring requirements throughout the residence. Documented existing electrical infrastructure with photographs and provided detailed estimate for complete residential rewiring project.

Completed comprehensive tune-up service on both furnace and air conditioning systems that were previously installed by our company. During inspection of the outdoor AC condenser unit, identified significant frost accumulation on lower fins and base, indicating potential refrigerant flow issues or restricted airflow that will require follow-up diagnostics. Performed standard maintenance procedures on both units including filter inspection, electrical connection verification, and visual equipment assessment to ensure continued system operation.

Responded to request for ductwork cleaning assessment and scheduling. Upon inspection, discovered significant mold contamination throughout the ductwork system, with extensive growth visible on interior ceiling surfaces and upper walls of the main plenum and distribution channels. Documented conditions with photographs showing heavy microbial buildup requiring remediation beyond standard cleaning services.

Conducted free estimate for recurring basement toilet clogs. Inspected existing toilet installation and basement drainage system including sump pump basin and discharge piping. Provided customer with multiple repair options to resolve chronic clogging issue and improve drainage performance.