Reliable HVAC, Plumbing & Electrical Services in Canal Fulton, OH

# HVAC Maintenance - Cooling Service Completed comprehensive preventive maintenance inspection on residential air conditioning system as part of recurring service agreement. Performed thorough examination of indoor air handler unit, including detailed inspection of control board, electrical connections, and blower assembly components. Removed access panels to evaluate internal electrical systems. Inspected main control board and circuit components for signs of wear, damage, or overheating. Verified all wire connections were secure with no evidence of loose terminals or degraded insulation. Control board showed clean operation with no visible corrosion, burn marks, or component failure. Heat sink and electronic components functioning within normal parameters. Conducted detailed inspection of blower wheel assembly. Examined blower wheel blades for debris accumulation, damage, or imbalance. Blades showed clean condition with proper spacing and no signs of wear or deterioration. Verifie

Removed and replaced existing water softener system with new sanitizer softener unit. Tied new system into incoming water supply line at location of previous unit and connected discharge line to existing floor drain. Installed digital control head on softener tank, completed all necessary piping connections using copper and PVC, and integrated system with existing well pressure tank. Delivered and staged six bags of salt for system startup. Tested all connections for proper operation and verified system functionality.

Responded to service call for non-operational garbage disposal unit. Upon inspection, diagnosed electrical failure preventing disposal from turning on. Coordinated communication through family member due to customer's hearing accommodation needs. Completed troubleshooting and restored garbage disposal to full working order.

Completed BS-MVP preventive maintenance cooling visit on 6-year-old air conditioning system. Performed comprehensive electrical diagnostics using digital multimeter to verify proper voltage and amperage at unit components. Inspected and tested electrical connections, wiring harnesses, and fuse assembly for continuity and proper operation. All electrical components tested within manufacturer specifications, fuses verified operational, and system confirmed ready for cooling season.

Completed routine AC maintenance on Carrier system. Inspected outdoor disconnect box and electrical connections, verified proper operation of indoor furnace unit, and documented all components functioning within normal parameters. All safety checks passed and system operating efficiently.

Completed routine BS-MVP cooling maintenance visit on residential HVAC system. Performed comprehensive inspection of indoor furnace unit in basement mechanical room and outdoor condenser units, confirming both systems are operational and in good working condition. All equipment tested and verified functioning properly per manufacturer specifications.

Completed comprehensive A/C tune-up on 4-year-old residential unit, including full system inspection of outdoor condensing unit and indoor air handler. Verified all electrical connections, tested capacitor functionality, confirmed proper refrigerant levels, and renewed MVP membership with technician present.

Responded to service call for HVAC system that activated both heating and cooling equipment simultaneously without user input. Inspected thermostat wiring and terminal connections, verifying proper wire placement and secure connections at control board. Examined outdoor condensing unit for proper operation and checked system controls for both furnace and air conditioning components. Tested thermostat programming and system communication to ensure proper cycling between heating and cooling modes. Verified all equipment returned to normal automatic operation with no further simultaneous activation of both systems.

Completed scheduled maintenance visit for MVP customer on 13-year-old air handler unit. Performed thorough inspection of blower assembly, revealing moderate dust and debris accumulation on blower wheel blades and housing. Inspected evaporator coil and found aluminum fins in serviceable condition with dust buildup present on coil face and drain pan. Documented equipment condition with photos for maintenance records.

Removed and replaced existing water heater with new Bradford White 40-gallon tall model in residential utility room. Installation included new expansion tank and water shut-off valve to meet current plumbing code requirements. Connected copper supply lines and piping to unit, verified all connections for proper seal and operation. Unit is covered under 8-year manufacturer warranty with extended 2-year warranty for total 10-year coverage. Tested system for proper heating function, checked temperature and pressure relief valve operation, and confirmed no leaks at all connection points. Water heater installed adjacent to existing HVAC furnace unit in mechanical closet with adequate clearance for maintenance access.

Completed MVP cooling maintenance visit as rescheduled. Performed system inspection and verified proper operation of all components. Inspected capacitor connections and electrical wiring, confirming secure terminations and proper voltage distribution throughout the unit. Examined evaporator coil condition, noting clean fins with no debris accumulation or blockage that would restrict airflow. All coil sections displayed uniform fin spacing and intact metallic surfaces with no signs of corrosion or damage. System operating within normal parameters upon completion of service.

Completed scheduled MVP cooling maintenance visit. Inspected and evaluated air filter condition, finding moderate dust accumulation on pleated media but filter still serviceable. Performed exterior inspection of condenser unit, verifying proper placement on pad, clear airflow through louvers, and adequate clearance from building structure and surrounding landscaping.

Responded to emergency no-cooling call caused by main drain backup affecting condensate pump operation. Successfully cleared main drain line blockage, restoring proper drainage and allowing HVAC system to resume normal cooling function.

Completed comprehensive tune-up on 3-year-old air conditioning system, including inspection of air handler unit, refrigerant lines, electrical connections, and control board components. All systems inspected and found to be operating within normal parameters, with wiring harnesses, circuit boards, and condensate drain lines verified for proper function and condition.

Responded to service call for slow draining bathtub/shower that temporarily improved with plunging but repeatedly slowed down. Upon arrival, assessed the drain system and removed significant accumulation of hair, soap residue, and organic debris from the drain line using professional drain cleaning equipment. Cleared the obstruction completely, restored proper drainage flow, tested the system to verify full functionality, and confirmed no leaks or additional plumbing issues present.

Replaced a leaking Rheem 40-gallon short water heater with a new Bradford White 40-gallon short unit featuring a 6-year manufacturer warranty. Installation included proper bonding wire, thermal expansion tank, and hard-piped gas line to eliminate the existing flexible gas connector. All components staged and installed to code specifications with appropriate safety measures and operational testing completed.

Responded to service call for leaking 40-gallon natural gas water heater (Model PROG40S-36N RH62) manufactured in March 2018. Upon inspection, identified active leak affecting entire home's hot water supply in basement utility area. Documented equipment specifications, safety labels, and installation configuration including pressure relief valve, gas connections, and copper supply lines with blue pressure regulator. Photographed unit condition, surrounding concrete floor showing water damage and staining, and proximity to HVAC system in mechanical room with concrete block walls.

Completed HVAC estimate for full system replacement in a large residential property exceeding 3000 square feet. Assessed existing electric heat pump system with basement-located air handler for replacement with Lennox vertical upflow/downflow air handler unit and outdoor heat pump condenser. Evaluated current installation including indoor air handler with humidifier, electrical connections, copper refrigerant lines, and ductwork in utility room. Inspected outdoor condenser unit positioned on rock bed against exterior wall with proper electrical disconnect and PVC drainage lines. Documented existing system configuration and provided comprehensive replacement estimate for complete heating and cooling system upgrade.

Responded to service call for garbage disposal issue at residential property. Upon inspection, assessed the existing disposal unit and drainage system beneath kitchen sink. Verified proper connection of P-trap assembly, drain lines, and dishwasher discharge hose to disposal unit. Tested disposal operation, checked mounting assembly and electrical connections, and ensured all plumbing connections were secure with no leaks present. System restored to full working order.

Responded to service call for slow draining shower. Upon inspection, removed drain cover and cleared accumulated hair, soap scum, and debris from the drain assembly causing the blockage. Tested drainage flow after cleaning and confirmed proper water evacuation with no standing water remaining in the tub basin.