Your home should be the one place where everything works as it should — comfortable air, flowing water, and safe, reliable power. Since 1937, Blind & Sons has been helping Hudson homeowners keep it that way. With a focus on complete home comfort, we offer trusted HVAC, plumbing, and electrical services all under one roof. Our goal is simple: show up when you need us, do the job right, and make sure you’re completely satisfied before we leave.
From routine maintenance and system replacements to emergency repairs, Blind & Sons is the go-to team for quality home service in Hudson, OH. Call (330) 753-7711 or https://www.blindandsons.com/contact-us
Proud to Serve the Hudson Community
Hudson is known for its charm, community spirit, and beautiful homes. With scenic trails, a lively downtown, and a proud history, it’s no surprise that so many families choose to call Hudson home. Blind & Sons is proud to be part of that story — delivering reliable, respectful service to homeowners across the area.
Whether you’re in an older colonial on North Main or a modern build near Boston Mills Road, our team understands the unique needs of Hudson homes. We tailor every visit to fit your home’s layout, your budget, and your long-term comfort goals.
Need Services?
We Can Help!
Heating & Cooling Services Built for Hudson Homes
Living in Northeast Ohio means dealing with both freezing winters and humid summers — and that makes your HVAC system one of the most important parts of your home. At Blind & Sons, we provide full-service heating and cooling solutions to keep your system efficient, reliable, and ready for whatever the weather throws at it.
Our HVAC services include:
- Air conditioning installation and replacement: We help you select the right AC unit for your home’s size and needs, then install it with care to ensure long-term performance.
- Furnace and boiler repair and installation: If your system is noisy, inconsistent, or not heating well, our experts can repair or replace it fast.
- Heat pump and ductless system services: Great for energy efficiency and room-by-room control, these systems are a favorite among homeowners looking to save on utility bills.
- Hybrid heating solutions: These systems combine the power of gas heating with the efficiency of electric heat pumps to optimize comfort and cost.
- Thermostat installation and troubleshooting: Whether it’s a smart thermostat or a standard model, we’ll make sure your controls are accurate and easy to use.
- Annual HVAC maintenance and tune-ups: Regular maintenance reduces the risk of surprise breakdowns, improves energy efficiency, and extends the life of your system.
Blind & Sons also offers affordable Maintenance Value Plans that provide routine tune-ups, discounts on service calls, and priority scheduling — helping you stay ahead of costly issues before they start.
Hudson Plumbing Services That Keep Everything Flowing
When your plumbing acts up, it’s more than an inconvenience — it can interrupt your whole routine. Whether it’s a slow drain, a water heater issue, or a leaking pipe, you need help fast. Blind & Sons provides dependable plumbing services in Hudson designed to restore comfort and protect your property.
Our plumbing services include:
- Pipe repairs and leak detection: From dripping faucets to hidden slab leaks, we find and fix problems quickly.
- Drain cleaning and clog removal: We use professional tools to remove stubborn blockages and prevent future backups.
- Water heater installation and repair (tank and tankless): We repair all brands and install high-efficiency models that deliver reliable hot water.
- Sump pump repair and replacement: Keep your basement dry and protected with reliable sump pump service.
- Gas line services: Safe gas line installation and repair for stoves, grills, fireplaces, and more.
- Plumbing system inspections: Catch issues before they escalate with comprehensive inspections and proactive recommendations.
We also provide whole-home water filtration and reverse osmosis systems to improve your water’s taste, clarity, and safety. Whether you’re dealing with hard water or want to reduce contaminants, we can help.
Safe & Professional Electrical Services in Hudson
Electricity powers just about everything in your home, from lighting and appliances to your HVAC and security systems. That’s why it’s so important to have a trusted electrician when something goes wrong. Blind & Sons offers a wide range of electrical services, always performed by licensed, trained professionals.
Our electrical solutions include:
- Electrical panel upgrades: Older panels can struggle to meet today’s energy demands. We’ll upgrade yours to keep your home safe and powered.
- Outlet and switch installation: Add outlets where you need them or replace aging ones for better safety and appearance.
- EV charger installation: Get fast, safe EV charging right at home, compatible with most makes and models.
- Whole-home surge protection: Protect expensive electronics and appliances from power surges and lightning strikes.
- Standby generator installation and maintenance: Keep your home running during power outages with a reliable backup power source.
- Lighting upgrades and ceiling fan installation: From recessed lighting to exterior upgrades, we brighten your home inside and out.
We also offer electrical safety inspections for home buyers and sellers, ensuring your property is up to code and ready for the future.
Need Services?
We Can Help!
Why Choose Blind & Sons in Hudson?
There’s a reason Hudson homeowners have trusted Blind & Sons for generations. We don’t just provide home services — we deliver peace of mind. With over 80 years of experience and a commitment to doing the job right the first time, we’re the name families count on for comfort, safety, and long-term savings.
When you choose us, you benefit from:
- Background-checked, regularly trained technicians
- 100+ hours of continuing education each year
- Upfront pricing and honest recommendations
- emergency service with no overtime fees
- Maintenance Value Plans for ongoing care and savings
- Coupons and financing to make service more affordable
We also back our work with warranties and a 100% satisfaction guarantee — because you deserve nothing less.
Schedule Home Services in Hudson, OH Today
Whether you’re looking to fix a nagging issue, upgrade an outdated system, or take proactive steps to protect your home, Blind & Sons is here to help. From HVAC and plumbing to electrical repairs and replacements, we’re your one-stop shop for reliable, professional service in Hudson.
Call (330) 753-7711 or contact us online to schedule your appointment today. Let Blind & Sons keep your home running smoothly — so you can focus on enjoying it.
Recent Jobs and Reviews in Hudson, OH
Job Locations and Reviews
Responded to no heat call on 6-7 year old Carrier furnace with recurring issues from previous winter. Upon inspection, accessed control compartment and evaluated electronic control board, relay module, and associated wiring connections. Verified installation date of January 2022 and documented system configuration. Performed diagnostic assessment of control components and wiring harness to identify cause of heating failure and prevent future occurrences.
Completed recurring maintenance visit on residential Lennox furnace system. Performed comprehensive inspection of heating equipment, including visual assessment of heat exchanger, burner assembly, and blower components. Verified proper operation of all mechanical and electrical systems. Inspected ductwork insulation and connections for integrity. Checked condensate drain line for proper drainage and cleared any potential blockages. Examined water heater and associated plumbing connections in mechanical room. All equipment found to be operating within normal parameters with no immediate repairs required.
Completed annual cooling maintenance and AC tune-up on a 9-year-old air conditioning system. Performed comprehensive MVP inspection with system found operating properly. Verified outdoor condensing unit performance and documented supply air temperature of 94.0°F at ductwork, confirming adequate cooling operation and system functionality.
Responded to no-power issue at newly installed electric water heater. Upon inspection, discovered tripped breaker in main electrical panel supplying dedicated circuit to water heater. Reset breaker, verified proper 240V supply at panel, and confirmed power restoration to water heater circuit. Tested water heater operation and verified unit energized correctly with all indicator lights functioning as designed.
Completed comprehensive assessment of existing residential HVAC system for replacement estimate on large home exceeding 3000 square feet. Evaluated current basement-installed natural gas furnace with associated PVC venting, condensate drainage system, and electrical connections, as well as outdoor Trane air conditioning unit positioned on concrete pad against building exterior. Documented equipment specifications, installation configuration, and spatial requirements to provide accurate replacement recommendations for complete heating and cooling system upgrade.
Responded to service call for dual sump pump system experiencing operational issues. Upon arrival, assessed both primary and backup sump pumps in basement pit. Primary pump, approximately one year old, was creating air bubbles at end of discharge cycle indicating improper installation or venting issues. Backup pump, approximately seven years old, had failed and was not discharging water when activated.
Inspected sump pit configuration and found water accumulation with visible sediment buildup along interior walls. Examined discharge piping system including vertical PVC pipe and associated fittings for blockages or improper connections. Evaluated electrical connections and float switch mechanisms on both pump units. Documented existing installation with photographs showing pump components, pit condition, and piping arrangement for assessment and future reference.
Completed comprehensive furnace maintenance on 3-year-old heating system. Performed full system inspection including burner assembly, heat exchanger, blower motor, control board, and all electrical connections. All components found operating within normal parameters with no issues identified.
Conducted on-site electrical assessment for generator installation estimate. Documented existing electrical infrastructure including service disconnect panel and PDB110 distribution panel with multiple circuit breakers. Photographed current panel configuration, wiring diagrams, and circuit labeling to evaluate system capacity and determine integration requirements for proposed generator. Created preliminary layout sketch noting key circuits including kitchen island microwave, outlets, and well pump to assess critical load requirements for generator sizing and transfer switch specifications.
Completed HVAC estimate for residential furnace and air conditioning system replacement in basement utility area. Evaluated existing gray metal furnace unit with connected ductwork, air handler with curved galvanized metal supply duct, and assessed compatibility with current infrastructure including water heater placement. Provided customer with pricing options for complete furnace and AC replacement versus AC unit only replacement, documenting equipment specifications, installation requirements, and system configuration for quote preparation.
Completed comprehensive HVAC system replacement estimate for dual furnace and air conditioning units under buy-one-get-one promotion. Assessed existing basement installation including current air handling unit, galvanized ductwork configuration, and electrical connections. Documented existing system components through detailed photography showing furnace with exposed burner assembly, copper tubing, associated ductwork including horizontal and vertical runs with elbow joints, and flexible metal conduits for electrical and gas lines. Evaluated mechanical room setup for replacement feasibility and provided customer with equipment options and installation specifications for two complete HVAC systems.
Completed comprehensive air conditioning maintenance tune-up on 4-5 year old Lennox system. Performed visual inspection of furnace, evaporator coil, and integrated humidifier unit, checked all electrical connections, cleaned coil fins, verified refrigerant levels, and tested system operation. Installed complimentary carbon monoxide detector and documented equipment condition with photos showing all components in good working order.
Responded to no hot water complaint caused by pilot light failure to ignite on American Water Heater Company Gama brand tanked water heater, model BFG614054ONOHFV. Inspected unit specifications and safety systems, documented equipment condition and label information for service records. Customer was unaware of water heater age, requiring documentation of serial number and model details for future reference and warranty verification.
Completed recurring preventive maintenance inspection on HVAC system. Inspected and documented condition of air filtration components, including standard pleated air filter showing moderate dust accumulation and evaporative cooling pad exhibiting mineral deposits and discoloration from extended use. System components photographed for maintenance records.
Completed relocation and installation of residential air conditioning system with new evaporator coil. Repositioned outdoor condensing unit to new location with proper gravel base for drainage and equipment stability. Connected new copper refrigerant lines with insulation to indoor air handler, installed condensate drain lines using white PVC piping with proper pitch and trap configuration. Integrated new evaporator coil with existing Lennox furnace system, fabricated and installed sheet metal plenum and ductwork connections to ensure proper airflow distribution. Verified all refrigerant line connections are secure, electrical connections are properly terminated, and condensate drainage is functioning correctly. System tested and operational.
Completed scheduled cooling maintenance on Lennox HVAC system (Model CX35-60C-6F). Performed comprehensive system inspection, verified refrigerant pressures within manufacturer specifications (minimum 440 PSIG), and cleaned evaporator coils using water only per equipment guidelines. Inspected furnace cabinet, humidifier unit, ductwork, and PVC condensate lines for proper operation. All components functioning normally with no issues identified.
Completed preventive maintenance on Lennox model CKH-48C-BF-20 air conditioning system. Inspected evaporator coil and found heavy accumulation of dust and debris on mesh screen, particularly concentrated on one side. Documented equipment condition with manufacturer nameplate showing serial number 1522AM2942 and refrigerant specifications. System operational upon completion of maintenance visit.
Completed routine maintenance visit on air conditioning system over 10 years old. Inspected HVAC equipment including humidifier unit, ductwork, and control panel with digital thermostat. Evaluated air filter condition, which showed significant dust and debris accumulation in pleated media, indicating normal use since last service interval. All system components, electrical connections, and plumbing lines were examined and found to be functioning properly.
Replaced existing refrigerator water feed line with new braided stainless steel supply line and installed new shut off valve. Removed old copper piping connection and upgraded system to provide improved reliability and leak protection for refrigerator water supply.
Inspected and assessed loose shower faucet valve assembly in bathroom, documenting existing bronze-finish fixtures and tile surround condition. Evaluated outdoor spigot location for potential replacement installation, noting existing utility infrastructure and ground conditions. Inspected water softener system and big blue filter housing to assess maintenance requirements and provide replacement recommendations.
Completed MVP cooling maintenance visit on Lennox EL16XC1-048-230A03 outdoor condensing unit containing R-410A refrigerant. Performed comprehensive system inspection including visual examination of electrical components, control board, blower motor assembly, and all wire connections. All components found operating within manufacturer specifications with no deficiencies noted during this routine preventive maintenance service.
