Your Trusted HVAC, Plumbing & Electrical Experts in Wadsworth, OH

Performed scheduled maintenance service on three Generac Guardian 22kW standby generators at commercial property. Inspected all internal components, cleaned snow accumulation from around units, and verified proper operation of control systems. All generators functioning correctly with no issues identified; service stickers updated to reflect next maintenance due date.

Installed a dedicated 20-amp GFCI outlet in basement area for stairlift operation as per placement specifications. Ran new wiring through exposed ceiling joists, securing to wooden structural elements with appropriate fasteners. Completed installation according to electrical code requirements for safety-critical mobility equipment.

Responded to a service call for toilet leak repair in a 25-year-old residence. Upon inspection of the tank components, diagnosed and replaced faulty flush valve assembly causing water leakage. Verified proper water level and flush operation before completing service.

Successfully replaced the outdoor temperature sensor on the HVAC system as requested. Performed comprehensive system tune-up which included inspection of the heat exchanger, verification of proper control board operation, and testing of the Ultra control panel functionality. All systems are now operating within normal parameters with proper temperature readings.

Performed comprehensive furnace maintenance service, including inspection of interior components, electrical connections, and filter system. Unit was found to be in proper working condition with all mechanical and electrical parts functioning as intended.

Successfully completed installation of 22kW Guardian generator with 90' of electrical line and 30' of gas line. Interior wiring connections were properly installed with color-coded harnesses secured within the housing enclosure. Electrical integration was completed at the main breaker panel with appropriate circuit connections and conduit installation.

Replaced inline filter on Taylor unit as part of scheduled maintenance. Filter was properly installed in the refrigeration line to ensure optimal system performance and prevent contaminants from circulating through the system. Unit was tested after installation and is functioning correctly.

Replaced leaking 40-gallon short water heater, installed new ball valve, and relocated expansion tank by coupling line together in ceiling. Repositioned expansion tank between water heater and ball valve to improve system function. Installed short riser before flue 90s to address observed backdraft issues around the flue.

Responded to service call to confirm leaking hot water tank. Upon inspection, identified an issue with the blue cylindrical pressure/expansion tank mounted to wooden joists in the utility area. The tank was connected to the plumbing system via a black pipe at its top. Assessment completed and documentation photos taken for service records.

Diagnosed and repaired a furnace that was blowing cold air by identifying a faulty ignition sequence preventing the burners from lighting. Inspected all internal components including the blower motor, heat exchanger, and gas valve assembly, then cleaned flame sensor connections and reset the system, restoring proper heating function.

Performed annual maintenance on 1-year-old MVP furnace that had been rescheduled from January to February. Inspected circuit board components and connections, and utilized specialized tool for system adjustments. All systems functioning properly.

Performed scheduled maintenance on Rheem Criterion II gas furnace. Accessed unit through back side door, completed full inspection and standard preventative maintenance procedures. System is operating within normal parameters.

Responded to MVP customer's service call regarding blocked floor drain. Inspected basement utility area plumbing system with focus on PVC drain pipes and connections. Cleared obstruction from floor drain and verified proper drainage function. Checked grinder pump operation and confirmed system working correctly after service.

Responded to service call for garage outlet repeatedly tripping in 5-year-old home. Upon inspection, identified loose connections in the electrical panel and distribution box causing circuit interruptions. Tightened all connections, verified proper grounding, and tested outlet functionality to confirm resolution of the tripping issue.

Performed scheduled MVP heating maintenance service on two systems, with focus on the older unit as requested. Inspected both systems for proper operation, changed the standard 16 x 25 x 1 air filter, and evaluated the water panel which requires replacement as anticipated during the service call.

Responded to service call for water leak at customer's residence. Identified and repaired corroded copper pipe above 6-year-old hot water heater that showed significant oxidation and blue-green patina indicating an ongoing moisture issue. Verified proper function of all plumbing connections and ensured no further leakage from the repaired area.

Responded to service call for cracked washer faucet. Upon inspection, found oxidized copper supply pipes with corroded brass fittings and shutoff valves. Replaced damaged washer and verified proper operation of faucet and valves.

Performed routine maintenance on Lennox furnace system as part of MVP service program. Inspected air filtration components including the Space-Guard Air Cleaner, noting moderate dust accumulation on the pleated filter. System appears to be functioning properly with all connections intact and ventilation pathways clear.

Performed routine maintenance on 8-10 year old furnace. Inspected blower wheel and fan assembly which were found to be in functional condition. System is operating within normal parameters.

Performed routine MVP heating maintenance service. Inspected blower wheel assembly which was found in good operational condition with no visible damage or debris accumulation. Examined plumbing connections and noted proper sealing at pipe joints with no signs of leaks.