Trusted HVAC, Plumbing & Electrical Services in Canton, OH

Completed routine HVAC maintenance visit for MVP customer with dual outdoor condenser units. Performed comprehensive system inspection including examination of both white and dark-colored condenser units positioned at building exterior, verified operational status of equipment, and inspected interior air handling components including ductwork, insulation integrity, and plenum accessibility. All systems assessed and documented with photographic records for service history.

Performed scheduled maintenance on Generac 22KW standby generator unit. Upon arrival, confirmed unit was operational with green and amber indicator lights flashing, signaling maintenance due. Completed full preventive maintenance service including oil and filter change, air filter replacement, spark plug inspection and replacement, and battery load test. Inspected fuel system, electrical connections, and control panel functionality. Cleared maintenance indicator lights and verified proper operation through system startup test. Unit returned to normal standby operation with all systems functioning within manufacturer specifications.

Responded to service call for outdoor spigot leaking into building siding. Upon inspection, identified water intrusion at the exterior faucet connection point where moisture was migrating upward behind the siding material. Assessed the hose bib mounting area and surrounding foundation for damage, documented conditions showing evidence of water exposure on concrete foundation and soil saturation near the fixture. Completed diagnostic evaluation and photographic documentation of the affected areas including the spigot installation point and adjacent building exterior.

Completed annual preventative maintenance inspection on one-year-old Lennox residential air conditioning system. Performed comprehensive tune-up including inspection of outdoor condenser unit, blower motor assembly, control board, and all electrical connections. Verified proper operation of all system components, checked refrigerant levels, inspected condensate drainage, and confirmed unit is functioning within manufacturer specifications. System operating efficiently with no issues identified.

Performed scheduled maintenance on 22 KW standby generator. Conducted comprehensive battery testing using digital battery analyzer, which revealed low battery voltage and elevated internal resistance readings. Advised that battery replacement will be necessary to ensure reliable generator operation during power outages.

Successfully installed five ceiling fans at the property: four indoor units and one outdoor unit. All locations had pre-existing wiring and fan-rated electrical boxes installed by the builder. Each fan was securely mounted to the designated fan box, electrical connections were completed per manufacturer specifications and local code requirements, and all units were tested for proper operation of both fan motor and integrated lighting fixtures. Installation confirmed all fans operate correctly with stable mounting and proper blade clearance.

Completed preventive maintenance cooling visit on 8-year-old residential air conditioning system. Inspected outdoor condenser unit, verified proper operation of fan assembly and protective guard, confirmed unit is level on concrete pad with adequate gravel drainage, and measured system performance parameters registering 45 degrees, indicating normal cooling operation.

Responded to no cooling complaint on residential air conditioning system. Upon arrival, found outdoor condenser unit with heavily contaminated coil fins, particularly dense accumulation of cottonwood seed fibers and organic debris blocking airflow through approximately 60-70% of the coil surface area on one side. Inspected unit from top access, noting normal wear consistent with outdoor installation but significant debris buildup preventing proper heat transfer. Documented existing conditions including wire connections, condenser coil contamination, and overall unit accessibility. Customer was advised that the extensive coil blockage was likely preventing adequate airflow and refrigerant heat rejection, which could cause the compressor to cycle on high pressure safety or appear non-functional, rather than actual compressor failure. Recommended professional coil cleaning service to restore proper airflow and system operation before proceeding with any component replacement diagnostics.

Replaced kitchen faucet with new single-handle unit including side spray assembly. Installed two new basket strainers in double-basin stainless steel sink. Replaced center outlet waste assembly, P-traps, and associated drain piping under both sink compartments with new PVC components to ensure proper drainage and code compliance.

Responded to no cooling call on 10-year-old residential HVAC system with reported condenser malfunction and unusual noise. Upon arrival, inspected outdoor condensing unit and indoor air handler system. Documented equipment condition and configuration, including furnace, evaporator coil unit, and outdoor condenser positioned on concrete pad. Customer enrolled in maintenance program during service visit.

Responded to service call for 20+ year old steam boiler with missing copper piping. Upon arrival, found water to home was shut off due to incomplete piping connections. Assessed boiler system and identified missing copper supply line sections that required installation. Documented existing conditions showing water heater, associated plumbing infrastructure with brass fittings and valves, and basement utility area layout. Photographed piping connections, structural elements, and overall system configuration for repair planning and customer records.

Responded to kitchen sink leak with suspected mold growth beneath fixture. Upon inspection, identified failed drain connection at P-trap assembly causing water intrusion into subfloor area. Accessed crawlspace to assess extent of moisture damage, confirming significant water staining on wooden subflooring and visible mold growth on adjacent wall surfaces. Replaced deteriorated drain components including P-trap and tailpiece connections, verified proper drainage flow, and recommended professional mold remediation for affected areas.

Completed scheduled BS-MVP cooling maintenance visit on 2-year-old outdoor heat pump unit located in backyard. Performed comprehensive system inspection including visual assessment of exterior cabinet condition, electrical connections, and internal components. Verified proper operation of compressor, capacitor, and contactor assembly. All electrical connections were secure with appropriate wire routing observed. Unit operating within normal parameters with no deficiencies noted at time of service.

Responded to recurring basement bathroom drainage issues with water backing up into shower from upstairs usage and toilet bubbling/fluctuating water levels. Performed main drain line cleaning to clear partial sewer blockage and conducted camera inspection to identify underlying cause of repeated obstructions. Restored proper drainage flow throughout plumbing system.

Replaced two upstairs toilets with customer-supplied fixtures, ensuring proper wax ring seals, water supply connections, and secure mounting. Performed descaling service on 2-year-old Navien tankless water heater by flushing unit with descaling solution to remove mineral buildup and restore optimal heating efficiency. All fixtures tested for proper operation and verified leak-free connections upon completion.

Responded to service call for fraying upper entrance electrical cable requiring replacement estimate. Upon inspection, discovered electrical panel with significant safety concerns including extensive rust and corrosion damage throughout the lower portion of the enclosure, indicating prolonged moisture exposure. The service entrance cable showed signs of deterioration with fraying conductors at the connection point. Panel contained multiple circuit breakers with dense wiring bundles entering from the top, with various colored conductors including black, red, white, yellow, and purple wires. The corrosion had compromised the integrity of the metal enclosure base plate where circuit breakers are mounted, creating potential safety hazards. Documented existing conditions with photographs showing the corroded panel box, deteriorated service entrance cable connections, and overall electrical system configuration. Provided comprehensive estimate for complete service entrance cable replacement

Conducted site assessment and provided quote for natural gas line replacement from meter to residence, spanning approximately 30 feet. Evaluated existing exterior gas meter assembly and piping configuration at foundation, noting weathered condition of current infrastructure. Inspected interior basement utility area where gas line enters structure, documenting corrugated metal ceiling conditions and existing pipe routing along concrete block walls. Photographed exterior meter installation showing aged piping and connections, as well as interior gas line entry point and distribution system. Determined potential need for complete meter replacement in addition to gas line installation based on current equipment condition and code compliance requirements.

Completed comprehensive plumbing repairs including installation of new waste and overflow assembly in bathtub with new trap, adapting connection to existing 1 1/2" copper drain line. Removed first floor toilet, cut 3" copper drain line below floor level, and rebuilt with new PVC toilet flange, resetting toilet on new flange to ensure proper seal and stability. Installed new sump pump in basement, removing old flex discharge line and replacing with 1 1/2" PVC piping system with new check valve on discharge line to prevent backflow.

Responded to service call for circuit breaker tripping on freezer circuit. Upon arrival, accessed electrical panel in basement area and performed diagnostic testing on affected breaker. Inspected recently upgraded panel installation and verified proper breaker sizing and connections for freezer circuit. Tested breaker operation, confirmed proper voltage readings, and checked for any loose connections or signs of overload conditions. Provided recommendations regarding potential appliance issues that may be causing repeated trips and advised on proper circuit loading to prevent future occurrences.

Conducted electrical panel assessment for potential replacement. Inspected existing electrical service equipment and main distribution panel, documented current conditions through photographic documentation of utility area and exterior electrical service entry point. Evaluated panel capacity, condition of service entrance conductors, and overall system integrity to provide comprehensive replacement quote.