Trusted HVAC, Plumbing & Electrical Services in Canton, OH

# HVAC Maintenance - Cooling Completed scheduled MVP cooling maintenance visit on residential air conditioning system. Performed comprehensive inspection of outdoor condenser unit, verified proper operation of compressor and condenser fan motor, checked refrigerant lines and electrical connections along exterior wall mounting. Unit found in operational condition with adequate airflow through metal louvers and fan assembly functioning normally on concrete pad installation.

Responded to main drain backup with slow drainage issue. Upon arrival, located main drain cleanout access point in basement utility area near water heater. Performed thorough inspection of drainage system and cleanout assembly. Successfully cleared main drain line obstruction using professional drain cleaning equipment. Verified proper flow and drainage restored to system. Tested multiple fixtures to confirm blockage eliminated and drainage operating at normal capacity.

Responded to no cooling complaint affecting entire residence. Upon arrival, performed visual inspection of outdoor condensing unit and found system operational but unable to maintain desired temperature throughout home. Unit age could not be verified from available documentation. Recommended further diagnostic evaluation to identify root cause of insufficient cooling capacity, which may include refrigerant charge verification, airflow assessment, and ductwork inspection to determine whether issue stems from equipment performance or distribution system inadequacies.

Installed a new 50-gallon Bradford White tanked water heater in basement utility area, replacing existing unit. Completed all necessary code upgrades including proper copper piping connections, expansion tank installation, and appropriate venting system integration. All plumbing connections were secured to manufacturer specifications and system was tested for proper operation upon completion.

Completed estimate for replacement of 37-year-old residential HVAC system. Assessed outdoor condenser unit showing significant age-related deterioration, including weathered housing, stained panels, and moss growth on concrete pad. Evaluated indoor furnace and ductwork system in basement mechanical room. Provided comprehensive replacement quote accounting for complete system changeout including outdoor condensing unit and indoor air handler with associated ductwork modifications as needed. Advised homeowner of pet hair considerations during installation process.

Provided estimate for replacement of a 2017 manufactured 40-gallon gas water heater exhibiting active leakage. Assessed existing Rheem Classic Professional series unit installed in basement utility area with standard top-mount brass connections for hot and cold water supply lines, temperature and pressure relief valve, and gas control assembly. Documented current installation configuration including copper supply piping, PVC venting system, expansion tank mounting, and floor positioning to ensure accurate replacement specifications and code compliance for new equipment installation.

Responded to service call for leaking natural gas water heater and provided free estimate for replacement. Upon inspection, confirmed active leak from tank requiring full unit replacement. Documented existing installation with photos showing white cylindrical tank-style water heater with natural gas connections, multiple pipe fittings at top including gas line and water supply/discharge lines, and unit positioned on containment platform against basement wall.

Replaced three outdated stop and waste valves on gas lines servicing the stove, water heater, and dryer with updated valves to ensure proper shutoff capability and code compliance. Removed the existing flexible gas line connection at the water heater and installed hard-piped gas supply line using black iron pipe and appropriate fittings for a permanent, code-compliant installation. All gas connections were tested for leaks, verified secure, and confirmed operational upon completion.

Installed dedicated AC circuit and power whip for outdoor condensing unit. Ran electrical wiring through attic space to exterior wall location, securing copper conductors to structural framing per code requirements. Terminated circuit at exterior disconnect and connected power supply to AC unit positioned on concrete pad. Verified proper voltage, tested circuit operation, and confirmed unit functionality upon energization.

Performed routine maintenance inspection on 20+ year old residential air conditioning system. Unit operational at time of service; verified condenser fan operation, inspected heat exchanger coil fins for damage and debris, and documented equipment condition with photos. Customer contacted prior to arrival as requested.

Completed installation of 80% AFUE gas furnace and air conditioning system. Installed new outdoor condensing unit with proper refrigerant line connections utilizing brass service valves with foam insulation for temperature control and condensation prevention. Mounted line set securely to exterior wall using metal bracket assembly. Verified proper electrical connections and replaced 20-amp fuses in disconnect box to ensure safe operation of new equipment. All refrigerant lines properly insulated and secured, system tested and operational.

Responded to service call for leaking water heater over 10 years old. Upon inspection, confirmed active leak from aging tank-style natural gas water heater installed in basement utility room. Unit showed signs of deterioration consistent with age, including corrosion at connection points and compromised tank integrity. Due to age of equipment and extent of leak, recommended full replacement rather than repair. Documented existing installation with photos showing flexible supply lines, gas connections, venting configuration, and overall condition of mechanical space for replacement planning purposes.

Performed routine maintenance on a 5-year-old tankless water heater unit, completing a comprehensive deliming flush service. Technicians descaled the heat exchanger and internal components to remove mineral buildup, ensuring optimal performance and energy efficiency of the Energy Star certified unit.

Performed annual maintenance inspection on a one-year-old Navien tankless water heater installed in basement utility area. Confirmed unit operational status, verified proper venting and gas line connections, and inspected all water supply lines for leaks or deterioration. Note: Service order indicated tanked water heater flush, but unit on-site is a tankless model which does not require traditional tank flushing procedures.

Completed 100-ampere electrical service upgrade including installation of new main breaker panel with proper circuit identification and labeling. Updated grounding system to meet current code requirements and installed exterior disconnect switch in compliance with 2023 National Electrical Code Article 230.85. All conductors properly terminated, panel mounted on plywood backing in utility space, and multiple branch circuits organized with appropriate overcurrent protection devices.

Replaced all three mini-split linesets on the system. Performed pump down procedure to recover existing refrigerant, then weighed in fresh R-410A charge to manufacturer specifications. System tested and verified operational upon completion.

Conducted on-site assessment for central air conditioning installation on a small residential property. Evaluated existing HVAC infrastructure, including current furnace/air handler unit in basement mechanical room, and assessed exterior wall mounting location near electrical service panel for potential condenser placement. Documented equipment specifications and site conditions with photos to prepare comprehensive system replacement estimate.

# Whole-House Drain Backup Resolution Responded to a whole-house drain backup in a 1962-built residence. Upon arrival, conducted comprehensive assessment of the plumbing system to identify the source of the backup affecting all fixtures. Inspected basement floor drain area, which showed evidence of water seepage and historical drainage issues based on concrete staining patterns around the drain cover. Evaluated the home's water treatment system configuration, including the well pressure tank and water softener/filtration equipment located in the basement utility area. Verified that the backup was related to the main drainage system rather than the water supply or treatment components. Cleared the main sewer line obstruction using appropriate drain cleaning equipment. The blockage was consistent with aging cast iron or clay pipe typical of homes from this era, where buildup and deterioration can cause recurring drainage problems. Restored proper flow throughout the entire household

Completed recurring salt delivery service for dual-tank water softener system. Delivered and replenished water softener salt pellets from warehouse inventory to basement utility area, filling the designated salt storage container adjacent to the water treatment equipment. System confirmed operational with both softener tanks displaying proper digital readouts and all plumbing connections secure with no visible leaks or issues.

Completed preventative maintenance inspection on residential air conditioning system for MVP customer. Verified system temperatures using digital thermometer, recording supply air temperature of 45.0°F at the evaporator coil, which indicates proper cooling performance. Inspected internal electrical components, wiring harnesses, and control board for proper connections and operation; all components found to be functioning within normal parameters with no immediate service needs identified.