Trusted HVAC, Plumbing & Electrical Services in Canton, OH

Completed annual preventative maintenance on one-year-old Lennox air conditioning system. Performed comprehensive tune-up including inspection of condenser unit, verification of refrigerant levels, cleaning of components, electrical connection testing, and system performance evaluation. Unit operating within normal parameters with no deficiencies noted; all components functioning properly for continued efficient cooling operation.

Installed one new electrical outlet and two LED light fixtures in garage workspace. All installations completed to code with proper circuit protection and secure mounting to ceiling and wall surfaces.

Completed comprehensive duct cleaning service for system with up to 14 vents, including mold and aroma treatment. Accessed ductwork through various entry points, removed accumulated dust, debris, and contaminants from supply and return air pathways, and applied antimicrobial treatment to address mold concerns and eliminate odors. Documentation photos captured insulation components and trim areas near vent locations to verify thorough access and cleaning completion.

Completed installation of new air conditioning system and evaporator coil at residential property. System was successfully installed in basement utility area with proper refrigerant line routing, electrical connections verified with FLNR 35 amp fuses at disconnect, and all ductwork connections secured to existing furnace plenum. Unit tested and operational upon completion.

Provided quote for replacement of two 40-gallon tanked water heaters installed side by side in utility area. One unit is currently non-operational, and customer requested both A.O. Smith water heaters be replaced simultaneously to ensure system reliability and uniform equipment age. Assessment included evaluation of existing copper piping connections, venting infrastructure, and installation space in unfinished basement area with exposed stud walls.

Responded to service call for water heater evaluation in residential basement. Upon inspection, found heavy corrosion present at top of unit affecting multiple connection points and surrounding pipe fittings. Assessed overall condition of existing water heater including age-related deterioration of copper piping connections and oxidation on metal surfaces. Documented current system configuration with photographic evidence showing corroded components, piping arrangement, and mechanical room setup. Provided professional assessment regarding feasibility of repair versus full unit replacement based on extent of corrosion damage and equipment condition.

Responded to service call for two toilets experiencing continuous running. Inspected first toilet tank and identified worn flush valve flapper assembly causing improper seal, allowing water to leak from tank into bowl. Float valve assembly also showed signs of age with mineral buildup present throughout tank interior. Replaced defective flapper and chain assembly to restore proper seal. Adjusted float valve settings to ensure proper water level and shutoff. Inspected second fixture and addressed similar running condition by replacing faulty flush valve components. Tested both toilets through multiple flush cycles to verify proper operation and confirm complete shutoff after each flush. Both units now functioning correctly with no continuous water flow.

Responded to service call for non-functioning GFI outlet serving jacuzzi and inoperative ceiling lights. Inspected electrical components in unfinished area, identified faulty GFI receptacle and loose wiring connections. Replaced defective GFI outlet, secured all electrical connections, and restored power to affected circuits. Verified proper operation of jacuzzi outlet and ceiling lighting fixtures upon completion.

Accessed living room ceiling near fireplace with 3' x 6' opening to locate tie-in point for existing lead drain line serving upstairs bathroom lavatory. Adapted existing cast iron drain run in ceiling and installed new 1 1/2" PVC lavatory drain line. Completed wall repair behind sink using new PVC sanitary tee, trap assembly, and galvanized-to-PVC adaptation for 1 1/2" vent connection. Connected faucet assembly and installed drop-in sink using materials provided on site. Inspected waste and overflow assembly in second upstairs bathroom through bedroom closet access point and performed drain snaking service to clear blockage.

Responded to callback for water leak at humidifier valve following recent hot water tank installation. Upon inspection, identified active leak at humidifier saddle valve connection point on copper water line. Removed defective saddle valve fitting and replaced with new valve assembly. Tested all connections for proper seal and verified no further leakage present. System restored to full operation.

Provided estimate for replacement of water heater over 10 years old. Inspected existing installation including water supply lines with blue-handled ball valves, PVC piping configuration, and flexible stainless steel connectors in utility area. Documented current equipment condition and mechanical room layout for water heater replacement quote.

Replaced 40-gallon tall water heater in basement with new Bradford White unit. Installed new expansion tank, ball valve, and hard-piped flue connection to existing chimney liner. All copper supply lines were connected with appropriate brass fittings and valves, ensuring proper water flow and safety compliance. The installation included complete integration with existing plumbing infrastructure and proper venting through the chimney penetration.

Completed service call back to upgrade electrical wiring to AC unit following new furnace installation. Replaced undersized conductors with properly rated wire per manufacturer specifications and code requirements, ensuring adequate ampacity for the HVAC system. Verified all connections at main panel and equipment disconnect, confirmed proper wire routing through ceiling joists, and tested system operation upon completion.

Completed HVAC estimate for air conditioning replacement due to identified leak in existing system. Evaluated residential basement installation featuring Lennox furnace with associated ductwork, exhaust piping, and auxiliary components. Documented current equipment configuration including gray metal cabinet furnace unit, metallic ductwork network with Y-junction connections, PVC drainage piping, and flexible tubing. Assessed system layout and mechanical room conditions to provide replacement recommendations and confirm ductwork compatibility for new equipment installation.

Conducted a comprehensive plumbing estimate for replacing deteriorated copper supply piping located beneath the kitchen sink and assessing requirements for new dishwasher installation. Evaluated existing under-sink plumbing configuration, including aged copper water lines showing signs of tarnish and wear, and documented current cabinet conditions with photographic evidence for accurate material and labor calculations. Prepared detailed scope of work covering removal of existing copper piping, installation of new supply lines with appropriate fittings and shutoff valves, and integration of dishwasher supply and drain connections to meet code requirements.

Completed a 125-amp electrical service upgrade at a residential property, including installation of a new meter panel with updated grounding system and exterior disconnect to meet 2023 National Electrical Code requirements. Installed a whole home surge protector for comprehensive electrical protection. Coordinated with utility company for same-day disconnect and reconnection, and obtained required permits and same-day inspection approval. All necessary components including panel hardware and electrical materials were utilized to bring the service up to current code standards.

Completed installation of a 90% efficiency Lennox furnace and air conditioning system. Installed new furnace unit with proper PVC venting configuration, mounted 30-amp Littelfuse FLNR fuses in exterior disconnect, and established all necessary electrical connections with appropriate conduit routing to exterior junction box. All equipment tested and operational upon completion.

Responded to no water service call at 70-year-old residential property. Upon investigation, accessed ceiling cavity to locate source of water supply blockage. Discovered compromised piping system requiring exposure of ceiling joists and insulation to properly diagnose the issue. Determined that aged galvanized supply lines were severely obstructed, restricting water flow throughout the home. Created access point through ceiling drywall to evaluate pipe condition and water shut-off valve functionality. Documented existing conditions with photos showing exposed framing, electrical components, and insulation. Advised property owner that full pipe replacement would be necessary due to extensive internal corrosion and blockage typical of original plumbing in homes of this age. Recommended scheduling follow-up appointment after 1 PM to complete pipe replacement work and restore water service.

Responded to service call to inspect and verify proper gas line shutdown and capping. Upon arrival, accessed utility space and performed thorough inspection of gas line termination point. Confirmed gas line was correctly capped with appropriate fitting and verified shutoff valve was in proper closed position. Tested connections for integrity and documented conditions with photographs showing compliant installation meeting safety standards.

Performed preventative maintenance descaling service on Rinnai RK100T1 tankless water heater (Serial #J58 RA-174499). Flushed unit with descaling solution to remove mineral buildup and maintain optimal heat exchanger efficiency. Verified all inlet/outlet connections, confirmed digital display functioning properly at 160°F setpoint, and ensured unit returned to normal operation upon completion.