Trusted HVAC, Plumbing & Electrical Services in Canton, OH

Completed scheduled MVP heating maintenance visit on 7-year-old furnace system. Performed comprehensive inspection of heating unit, including examination of blower motor assembly, condensate drainage system, pressure switch components, and all electrical connections throughout the control panel. Verified proper operation of all internal mechanical components, checked wire connections and terminals on the main control board, and documented equipment condition through photographic records. All systems found operating within normal parameters with no issues identified requiring immediate attention.

Conducted comprehensive on-site evaluation for complete HVAC system replacement at residential property. Assessed existing outdoor air conditioning condenser unit positioned against exterior wall in landscaped area, documenting current equipment specifications, installation configuration, and surrounding site conditions. Photographed unit placement on concrete pad, electrical disconnect box mounting, refrigerant line routing, and clearance requirements relative to vegetation and structures. Evaluated system accessibility for future replacement installation, noting mulched garden bed with hostas and ornamental plantings requiring protection during equipment changeout. Reviewed electrical service connection and conduit pathways for compatibility with new equipment specifications. Provided detailed replacement options and equipment recommendations based on current system assessment and homeowner requirements.

Excavated along exterior foundation wall to access deteriorated underground drainage system. Removed and replaced failed wye fitting and copper drain lines serving two bathroom groups and kitchen. Installed new drainage piping to restore proper wastewater flow from all affected fixtures. Backfilling arranged with separate contractor, with landscaping and grass restoration excluded from scope of work.

# HVAC Service Call - No Cooling Condition Responded to service call for AC unit not operating following electrical disturbances including flickering lights, unusual sounds, and electrical panel tripping. Customer reported system shut down completely after these events occurred. ## Diagnostic Findings Upon arrival, performed comprehensive electrical diagnostics on Lennox XC16N024-230-09 condenser unit (Serial: 5215E50675) utilizing digital multimeter. Unit showed signs of electrical fault condition. Inspected outdoor condensing unit installation and verified proper refrigerant line connections and physical mounting integrity. Proceeded to main electrical service panel to investigate reported power interruption. Examined circuit breaker panel configuration and identified tripped breaker condition affecting HVAC circuit. Inspected main feed conductors, branch circuit wiring, and breaker connections for signs of overheating, loose connections, or damage. Verified proper wire sizing an

Completed comprehensive AC tune-up on Lennox outdoor condenser unit and indoor air handler system. Performed standard maintenance protocol including system inspection, filter check, electrical connections verification, and refrigerant line assessment. Installed carbon monoxide detector as part of service appointment to enhance home safety monitoring.

Completed comprehensive heating maintenance on Goodman gas furnace system. Performed combustion analysis using digital analyzer, confirming optimal performance with natural gas readings showing 92.5% efficiency, 52 ppm CO, 4.6% O2, and 9.2% CO2 - all within manufacturer specifications. Inspected furnace components, humidifier system, air filtration unit, and PVC venting for proper operation and safety compliance.

Conducted comprehensive assessment of existing HVAC system in crawl space for equipment replacement estimate. Documented current furnace and air conditioning unit conditions, including heavily corroded copper piping connections, aging water heater, deteriorated ductwork, and compromised structural elements in confined utility space. Provided detailed photographic documentation and replacement recommendations for complete system upgrade scheduled for installation.

Replaced two existing electrical outlets with new receptacles, including one GFCI outlet installed in the kitchen area near the countertop workspace. Installed outlets to current code specifications and verified proper grounding and functionality upon completion.

Responded to service call for mini split system not cooling following recent PCB installation. Inspected refrigerant line connections, valve assembly, and condensate drain routing at ground-level unit. Verified proper installation of brass valve assembly with compression fittings and flexible line connections, confirmed system components were secure and functioning correctly, restoring cooling operation to the mini split system.

Completed recurring MVP maintenance visit on 2-year-old Amana furnace and air conditioning system. Performed comprehensive inspection of indoor furnace unit and outdoor condenser, verified all operational parameters, checked electrical connections and safety controls, inspected condensate drainage system and PVC venting, and confirmed proper system operation for both heating and cooling components.

Completed full HVAC system installation including a 90% efficiency furnace and air conditioning unit. Installed new furnace with metal ductwork in basement utility area, ensuring proper ventilation and connection to existing duct system. Positioned exterior AC condenser unit on concrete pad against house foundation with proper clearance, connected refrigerant lines and electrical service, and installed PVC condensate drain line along exterior wall. System tested and verified operational with all components functioning within manufacturer specifications.

Performed comprehensive AC tune-up on five-year-old garage unit with no reported issues. Inspected and documented electrical components including capacitor, contactor, and transformer connections; verified all wire terminations secure with proper color coding intact. Cleaned accumulated dust and debris from base pan and electrical compartment, confirmed all safety labels present, and verified system operational status with all components functioning within normal parameters.

Conducted comprehensive on-site evaluation for complete HVAC system replacement at residential property. Assessed existing cylindrical outdoor condensing unit positioned on concrete pad with platform bases in side yard area, noting current equipment configuration and clearances relative to foundation, privacy fencing, and utility connections. Evaluated indoor air handler and furnace system located in basement mechanical room, documenting current beige cabinet unit alongside water heater, existing ductwork routing through floor joists, and electrical service connections. Photographed both exterior and interior equipment installations to document pre-replacement conditions and facilitate accurate equipment sizing and replacement planning for forthcoming system installation.

Responded to service call for recently installed ductless mini-split system where outdoor unit cover was improperly secured following electrical rewiring during initial installation. Inspected outdoor condenser unit mounted on stand with rubber pad, verified refrigerant line connections and electrical conduit routing along building exterior, properly reinstalled and secured unit cover panel to manufacturer specifications, and documented completed work with photographs.

Installed Navien NPE-240A2 tankless water heater on wall adjacent to water softener, positioned between window and electrical outlet. Installed surge protector to service softener, tankless unit, and sump pump. Routed condensate line to discharge into sump crock. Terminated intake and exhaust venting through side wall at front right corner of residence. Capped existing B-vent chimney with 3-inch cap. Capped water lines at old tank location and installed new tee fittings closer to new unit for optimal configuration. Cut in 1-inch by 3/4-inch MegaPress tee fitting for gas line connection near unit location.

Responded to water backup from basement floor drain. Upon arrival, inspected basement plumbing system including pressure tank, piping connections, and drainage system. Identified water accumulation on concrete floor around plumbing equipment and floor drain area. Assessed main drain line and pressure tank installation for potential blockage or system malfunction causing water to back up through basement drain. Cleared obstruction and verified proper drainage flow restored to prevent further water intrusion into basement.

Installed electrical wiring and connections for septic system operation. Ran new electrical circuit from main panel through attic space to exterior junction box mounted on brick wall, utilizing appropriate gauge wire and weatherproof enclosures. Completed all wire terminations with proper wire nuts and secured exterior junction box to ensure code-compliant installation for septic system power supply.

Conducted on-site evaluation for mini split installation on third floor location. Assessed existing electrical panel capacity and circuit availability to determine feasibility for new mini split system power requirements. Documented electrical panel configuration showing adequate breaker positions and load capacity for proposed 9,000 BTU mini split unit installation.

Responded to a service call for corroded plumbing beneath a bathroom sink. Upon inspection, identified severe corrosion on the pipe connecting the P-trap assembly to the wall drain, which posed risk of leakage and water damage. Removed the deteriorated section and replaced with new PVC piping, ensuring proper alignment and secure connections. Tested the drain system for leaks and verified proper water flow. All plumbing components are now functioning correctly with no signs of leakage.

Responded to callback for air conditioning system not cooling properly. Connected manifold gauges to measure refrigerant pressures and diagnose system operation. Issue remains unresolved and requires further troubleshooting to identify root cause of cooling failure.