HVAC, Plumbing & Electrical in Cuyahoga Falls, OH

Completed MVP Cooling Visit maintenance service on Lennox HVAC system. Accessed air handler unit in mechanical space, performed system inspection of internal components and wiring, and replaced pleated air filter with new clean filter to ensure proper airflow and system efficiency.

Completed MVP Cooling Visit recurring maintenance service on residential HVAC system. Performed comprehensive inspection of indoor furnace unit and outdoor condensing unit, documenting equipment condition through photography. Verified proper operation of gas valve assembly, control board, electrical connections, and wiring harnesses on indoor unit. Inspected outdoor condenser unit including fan motor, fan guard, and cabinet condition. All components found operational with normal wear patterns consistent with regular use.

Completed scheduled BS-MVP cooling maintenance visit on 5-year-old Lennox air conditioning system. Performed comprehensive inspection of outdoor condensing unit, verified proper operation of all components, and documented equipment condition with photographs showing unit in well-maintained landscaped area with adequate clearance for airflow.

Completed scheduled preventive maintenance cooling visit on 8-year-old outdoor HVAC unit. Performed comprehensive system inspection including refrigerant levels, electrical connections, and condensate drainage. Inspected and documented Aprilaire drum-style humidifier installation on ductwork system. Examined humidifier evaporator pad assembly, noting diamond-pattern mesh filter pad within black plastic frame housing. Verified water distribution system components including tubing and brass valve fittings are functioning properly. All equipment photographed and found to be in normal operating condition with no immediate service needs identified. System operational and ready for continued use.

Responded to kitchen sink drain clog. Inspected plumbing assembly beneath sink, including chrome drain pipe, P-trap, and supply lines. Cleared blockage from drain system and verified proper water flow through pipes. All plumbing components functioning properly upon completion.

Responded to leak behind toilet with unknown source. Upon inspection, identified water damage and rust staining on baseboard and tile grout near toilet base, indicating chronic moisture issue. Traced leak to deteriorated supply line connection. Installed new braided stainless steel flexible supply lines with dual shut-off valves mounted on wooden backing board for improved access and future maintenance. Tested system under pressure to verify proper sealing and confirm leak resolution.

Completed scheduled preventive maintenance cooling visit on 13-year-old Lennox HVAC system. Performed comprehensive inspection of air handler unit, including examination of evaporator coil which showed normal honeycomb pattern with no visible debris accumulation or damage. Verified proper drainage line routing and confirmed refrigerant lines were secure with no signs of leakage. Inspected auxiliary Accuaire component and main furnace cabinet for proper operation. All system components functioning within normal parameters at time of service.

Completed MVP cooling maintenance visit on 11-year-old Trane XR octagonal condenser unit. Performed comprehensive system inspection including exterior condenser examination, verified operational status of fan motor and compressor, and checked electrical connections at disconnect box. Inspected and serviced air filter at indoor air handler, noting moderate dust accumulation indicating proper filtration. All components found operating within normal parameters for unit age, with routine maintenance tasks completed to ensure continued system performance.

Completed MVP AC maintenance on cooling system. Identified and documented failed 20-amp Littelfuse FLNR fuses in outdoor disconnect switch showing oxidation and weathering from environmental exposure. Inspected electrical disconnect assembly and confirmed fuse failure indicators on safety switch mechanism. Photographed damaged components for service records and customer documentation.

Completed routine MVP cooling maintenance visit on 4-year-old Lennox SL280UH110V60C-07 furnace system. Performed standard system inspection, verified temperature readings at 53°F, documented equipment specifications, and confirmed all manufacturer labels and technical data were legible for future service reference.

Performed routine maintenance on a 7-year-old residential air conditioning system as part of an existing maintenance plan. Inspected outdoor condenser unit and noted significantly soiled side filter/grille with heavy dust and debris accumulation. Cleaned condenser coils and filter panels to restore proper airflow and system efficiency. Verified system operation and measured supply air temperature at 53°F, confirming adequate cooling performance. Unit returned to normal operating condition.

Conducted on-site assessment for complete HVAC system replacement at residential single-family home. Evaluated existing Concord furnace and split-system air conditioning equipment located in basement utility area. Documented current system configuration including ductwork, PVC venting arrangement, and equipment placement. Photographed existing furnace installation showing beige-colored unit with top-mounted PVC exhaust venting, gray metal supply plenum, and concrete floor installation. Assessed basement mechanical space infrastructure including exposed floor joists, concrete block walls, existing ductwork routing, and utility connections. Provided comprehensive replacement quote for new furnace and air conditioning system to homeowner.

Responded to no cooling complaint on Trane air conditioning system. Upon arrival, conducted visual inspection of outdoor condensing unit and verified unit location and accessibility. Documented existing equipment condition and surrounding installation environment for service records.

Responded to a gas leak call at the property. Upon arrival, confirmed the presence of a gas leak and conducted a thorough inspection of the gas system infrastructure. Investigation revealed that the leak was isolated to specific equipment within the mechanical space. During the assessment, discovered that the gas utility company had already shut off the gas supply to the property as a safety precaution. Inspected the overhead plumbing and gas piping assembly, including copper lines, black iron pipe, shutoff valves, and associated fittings in the basement mechanical area. Documented the existing gas line configuration and equipment connections with photographs for record-keeping purposes. Enrolled the property in the maintenance value program as part of establishing service for the new residence.

Completed scheduled preventive maintenance cooling inspection on 13-year-old HVAC system. Performed comprehensive electrical diagnostics using digital multimeter to test capacitor, evaporator coil circuits, and system components. All measurements verified within acceptable operating parameters, system operating efficiently with no deficiencies noted.

# HVAC Maintenance Service Completed Performed comprehensive cleaning service on indoor air handler unit. Cleaned and treated evaporator coil to remove accumulated dirt and debris, improving heat transfer efficiency and airflow. Performed thorough blower assembly wash to restore proper air circulation and system performance. Cleared and treated condensate drain system, including drain pan tabs, to ensure proper drainage and prevent water backup. Service addressed visible rust staining on drain pan and metal surfaces caused by moisture exposure. Total service time of two hours restored unit to optimal operating condition.

Responded to follow-up service call for air conditioning unit with intermittent clicking sound reported by customer via video documentation. Performed comprehensive diagnostic testing using electronic measuring equipment and system analysis tools to identify source of noise concern. Conducted thorough inspection of condenser unit components, electrical connections, and mechanical assemblies to verify proper operation and resolve intermittent issue under warranty coverage.

Conducted comprehensive estimate for ground-level HVAC unit replacement with evaluation of alternative rooftop installation option. Documented existing basement-mounted system showing aged heat exchanger coils, deteriorated ductwork assembly, and surrounding infrastructure with significant moisture exposure and structural wear. Assessed crawl space conditions revealing water-damaged floor joists, mold presence, and compromised insulation, which factors into replacement recommendations and installation planning.

Completed MVP recurring cooling maintenance visit on 4-year-old residential air conditioning system. Performed comprehensive inspection of outdoor condenser unit, verified electrical connections at disconnect box, and documented equipment condition with photos. Unit operating within normal parameters with no immediate service needs identified.

Responded to leaking outdoor spigot on two-year-old installation. Accessed supply line through interior wall, replaced faulty compression fitting on copper pipe, and restored proper seal to eliminate leak. Tested system for proper operation and confirmed no further water intrusion.