HVAC, Plumbing & Electrical in Cuyahoga Falls, OH

Responded to multiple plumbing concerns including a basement shower leak, reduced water pressure, and refrigerator water line leak. Inspected jetted bathtub fixtures and aging tub spout/shower diverter valve showing significant oxidation and wear. Examined basement plumbing infrastructure, including PVC P-trap drain assembly beneath floor joists serving upper level fixtures. Assessed drain system connections and mounting hardware for proper installation and potential leak sources. Documented condition of plumbing components and fixtures to address reported water leak issues and pressure concerns.

Performed coil cleaning service on residential Lennox outdoor condensing unit. Condenser coils were previously identified as dirty during tune-up inspection and required cleaning to restore proper heat transfer and system efficiency. Cleaned condenser coils, verified unit operation, and restored system to proper working condition.

Responded to service call for jammed garbage disposal unit. Upon inspection, confirmed disposal was inoperable due to mechanical jam. Customer declined to proceed with plumbing repairs at this time, as electrical contractor was scheduled separately to address non-functioning disposal switch. Service visit rescheduled pending completion of electrical work to restore power to disposal switch.

Responded to service call for non-functioning garbage disposal switch. Upon arrival, accessed under-sink cabinet area and identified faulty wall switch controlling disposal unit. Replaced defective switch with new device, verified proper electrical connections, and tested disposal operation to confirm full functionality. Coordinated with plumbing team for follow-up service as needed.

Replaced exterior sillcock with new Woodford frost-free hose bib. Accessed plumbing lines through ceiling panel near driveway area to complete installation. Parts were ordered and received prior to completing the repair, ensuring proper freeze-proof protection for the exterior water connection.

Responded to callback for toilet that was previously installed but experiencing rocking and improper wax seal placement. Removed and properly reset toilet with new wax ring to ensure stable mounting and watertight seal at floor flange. Verified secure installation with no movement and confirmed proper seal alignment to prevent future leaks.

Conducted free estimate for automatic water shut-off valve installation in basement utility area. Assessed existing copper water supply line with green valve fitting and documented current plumbing configuration for potential valve upgrade under campaign availability.

Responded to no cooling complaint at rental property. Upon inspection, found central A/C system with refrigerant issue indicated by accessible service ports on suction and liquid lines. Evaluated system components including furnace air handler and refrigerant piping connections. System assessed and documented for property management records.

Performed annual air conditioning maintenance on outdoor condenser unit. Completed comprehensive inspection of all system components, verified proper refrigerant levels, cleaned condenser coils, checked electrical connections, and confirmed unit operation within manufacturer specifications.

Inspected and assessed leaking exterior faucet at front of residence, approximately 60 years old and likely original to the property. Also evaluated backyard faucet per customer request to determine condition and identify any potential issues requiring attention.

Responded to no cooling complaint on residential air conditioning system aged 15-20 years. Upon arrival, performed diagnostic evaluation of outdoor condensing unit. Connected manifold gauge set to service ports to measure system pressures and assess refrigerant charge. Conducted visual inspection of condenser unit exterior, electrical connections, and refrigerant line set. Unit showed signs of age-related wear with weathering on exterior panels and some corrosion present at service connection points. System evaluation completed to determine operational status and identify potential causes of inadequate cooling performance.

Conducted on-site assessment of 22-year-old residential air conditioning system for replacement estimate. Evaluated existing outdoor condenser unit with cylindrical design and horizontal fin configuration positioned on concrete pad against building exterior, noting age-related wear and system inefficiency. Inspected attic-mounted ductwork system, documenting metal duct routing through ceiling joists and assessing overall HVAC infrastructure condition to provide comprehensive replacement recommendations.

Completed water heater replacement in a 1947-built residence. Removed existing aging water heater unit and installed new replacement tank with proper venting and safety compliance. Connected gas supply line using flexible yellow corrugated tubing with appropriate shutoff valve and fittings. Installed copper water supply lines with brass compression fittings, ensuring secure connections for both hot and cold water distribution. Verified all plumbing connections for leaks, confirmed proper gas line installation, and tested unit operation. All work performed meets current plumbing codes and manufacturer specifications for safe water heater operation.

Completed annual air conditioning maintenance on a 3-year-old Coleman system enrolled in the MVP plan. Performed comprehensive inspection of both indoor furnace unit and outdoor condensing unit, checking all electrical connections, refrigerant levels, and operational components. Total service time was approximately 2.5 hours with system operating within normal parameters upon completion.

Completed scheduled preventive maintenance on 9-year-old residential cooling system. Performed comprehensive inspection of outdoor condensing unit, including examination of condenser coils, fan operation, and cabinet condition. Unit showed significant accumulation of dust and debris on exterior grille surfaces, which was documented. Verified proper refrigerant line connections and assessed overall system functionality. All components operating within normal parameters at time of service.

Conducted on-site assessment for HVAC system replacement in commercial retail environment. Evaluated existing air handler unit with vertical configuration and assessed basement utility area including water heater and drainage systems to provide comprehensive equipment replacement estimate.

Provided estimate for Mitsubishi mini split system replacement to upgrade existing outdoor unit with different style configuration. Assessed current installation location with two condensing units on gravel pad adjacent to building with weathered siding, noted electrical disconnect box and conduit routing, and documented site conditions for proper equipment sizing and placement recommendations.

Responded to no-flow condition at outdoor hose bibb following seasonal water line reactivation. Located and inspected interior shut-off valve with blue cross-handle in basement ceiling area controlling supply line to exterior spigot. Diagnosed issue stemming from valve position or potential freeze damage to supply line. Cycled valve to restore water flow and verified proper operation of outdoor hose bibb, confirming system returned to normal function.

Performed second opinion evaluation of furnace condensate drain line system requiring repair. Conducted camera inspection of drain line to assess condition and feasibility of trenchless repair options due to concrete floor installation. Documented interior condition of drain line showing corrosion, discoloration, and buildup, and provided recommendations for repair approach that would minimize disruption to concrete flooring.

Completed routine cooling maintenance on 12-year-old residential air conditioning system. Inspected outdoor condensing unit with spiral-wound coil housing, noting significant dust and debris accumulation between coil fins consistent with age and outdoor exposure. Cleaned condenser coils to restore optimal heat transfer efficiency. Verified refrigerant lines and connections for proper operation. Measured supply air temperature at 64.2°F, confirming adequate cooling performance. System operational and running within normal parameters upon completion of maintenance service.