HVAC, Plumbing & Electrical in Cuyahoga Falls, OH

Performed follow-up assessment for customer-supplied toilet and bathroom sink installation. Inspected existing plumbing connections and floor condition, noting water supply line placement and drain configuration. Documented current installation status with photographs to prepare accurate installation quote as requested.

Performed routine maintenance on Lennox heating system for MVP customer. Inspected unit installation, ductwork connections, and ventilation components, confirming all elements are properly secured with appropriate metal tape at connection points. Visual examination of heat exchanger fins showed minor dust accumulation but overall good operating condition.

Successfully installed two new junction boxes in the ceiling and mounted two new light fixtures, working from the existing switch location near the front door. Work included proper wiring connections, secure mounting of fixtures, and testing functionality of the completed installation.

Repaired split ABS kitchen drain line by cutting pipe below floor level and installing approved transition coupling to connect ABS to PVC. Rebuilt drainage system and tied back to vertical PVC pipe with standard coupling. Replaced lower fernco with approved transition coupling on horizontal pipe to laundry tub, resolving leak issues.

Performed assessment for furnace and AC replacement. Current outdoor condenser unit shows signs of weathering and possible mold growth, positioned on concrete pad with aging electrical connections. Inspection of attic revealed compromised ductwork with inadequate insulation and sagging fiberglass batts between joists, indicating potential efficiency issues throughout the system.

Performed scheduled MVP Cooling maintenance service on outdoor air conditioning unit. Inspected unit installed on concrete pad with proper clearance and verified system operation. Unit appears to be in normal working condition with no visible damage or unusual wear; documented condition with photos for service record.

Responded to a service call for recurring kitchen sink drainage issue. Inspected under-sink plumbing system including P-trap and PVC pipe connections. Successfully cleared the clog, restoring proper drainage function as previously performed during the January service visit.

Completed scheduled MVP heating maintenance visit. Performed comprehensive system diagnostics using digital clamp meter, recording 45-amp reading during operational testing. All heating components inspected and verified to be functioning within normal parameters.

Responded to service call for non-functioning GFCI outlet and shower light in bathroom with breaker tripping issue. Performed comprehensive inspection of the electrical panel, which was found to be in good working condition with proper wire routing and connections. Resolved circuit fault causing the breaker to trip, restoring power to both the GFCI outlet and shower light fixture.

Performed diagnostic service on furnace in response to reported thermostat malfunction. Inspected and replaced dirty air filter which was restricting proper airflow. Used hex key to access and adjust internal components, restoring proper system operation and thermostat functionality.

Diagnosed pressure switch circuit board (PSCB) malfunction on Lennox furnace system. Performed visual inspection of furnace components, ductwork, and associated PVC venting system in utility closet installation. Determined PSCB failure requires replacement part; customer advised of necessary follow-up service.

Inspected kitchen sink plumbing system exhibiting signs of corrosion and potential leaks. Replaced deteriorated P-trap assembly and associated PVC drain pipes that showed significant rust staining at connection points. Verified proper connection to existing garbage disposal unit and ensured all new components were securely installed with appropriate seals to prevent future leakage.

Performed routine MVP furnace maintenance service. Inspected residential HVAC system including furnace unit, ductwork connections, and thermostat functionality. Documented system condition with photos showing the properly installed furnace with attached ductwork, warning labels, and the Fieldwire thermostat control unit.

Replaced kitchen sink faucet in 70-year-old home, addressing worn components and ensuring proper water flow. Cleared slow bathtub drain, removing accumulated debris and testing drainage functionality to confirm proper operation.

Diagnosed and repaired electrical issue with hot tub circuit that was tripping the breaker. Inspected outdoor emergency shutoff panel, verified proper connections at the 50A circuit breaker, and ensured all wiring (including ground) was correctly terminated. System now functioning properly without overload issues.

Repaired water leak in kitchen drain line where it penetrated to floor below by replacing damaged section of black PVC pipe and failed joint. Installed new properly-sealed fittings at the T-junction to eliminate ceiling leak, ensuring proper drainage from kitchen sink and dishwasher with no further water intrusion.

Replaced customer's malfunctioning garbage disposal with new PRO 750-6 3/4 HP quiet technology model. While system was disconnected, snaked the kitchen drain line to resolve slow drainage issue. Completed full installation with new PVC drain assembly and verified proper operation of both disposal and drain system.

Performed scheduled MVP heating maintenance service. Inspected burner assembly and heat exchanger, noting minor corrosion on burner plate requiring monitoring. Used hex key to adjust and tighten components as needed for optimal system performance.

Completed installation of an expansion tank on a 4-year-old Rheem water heater to bring system up to code. Removed failing dielectric connector on the cold inlet side and installed new connections from the ball valve to appropriate tie-in point. All components were properly staged and installed according to manufacturer specifications.

Completed replacement of the defective zone control panel with a new unit. Installed and configured the replacement panel, including setting up the HP LAT High Limit (120°) and Resistance Lock OAT parameters through the setup wizard. System is now operational with proper zoning functionality restored.