HVAC, Plumber & Electrician Services in Fairlawn, OH

Performed scheduled MVP Heating Visit, conducting combustion analysis on natural gas system. Testing revealed CO levels at 11ppm, system efficiency at 80.3%, CO2 at 5.6%, and stack temperature at 308°F. Inspected blower assembly and heat exchanger components, noting normal dust accumulation but confirming all mechanical connections remain intact and functional.

Performed comprehensive AC tune-up on residential system of undetermined age. Inspected and cleaned outdoor condenser unit, removing accumulated debris from around base and fins. Examined motor/compressor assembly, noting normal operational wear and verified proper electrical connections to ensure optimal system performance.

Performed scheduled maintenance visit on furnace system. Conducted thorough inspection of electrical components and wiring connections within the unit, noting complex but functional wiring arrangement. Examined the Aprilaire Home Comfort Control unit mounted on the HVAC cabinet, documenting some signs of wear on the controller.

Responded to customer report of whistling noise from new furnace. Inspected unit's underside components including insulated hoses, ventilation openings, and connection lines. Identified and corrected improper routing of the black insulated hose that was causing air restriction and resulting noise.

Performed routine AC tune-up on 9-year-old Carrier system. Inspected and verified proper operation of the furnace and humidifier unit. System is functioning correctly with no issues detected; all components including PVC venting system and connections are in good working condition.

Performed routine heating maintenance on 6-year-old Lennox system. Conducted electrical testing using Fieldpiece SC260 multimeter, confirming proper voltage readings of 5.02. System functioning correctly after comprehensive tune-up service.

Performed routine maintenance on Lennox HVAC system with AprilAire integration. Inspected and serviced both heating and cooling components, including verification of proper venting through PVC pipes and evaluation of ductwork connections. System appears to be functioning as designed with no immediate concerns identified during the tune-up service.

Responded to service call for a leaking toilet. Upon inspection, removed tank lid and identified issue with the flush valve assembly. Replaced faulty components, verified proper water level, and tested for leaks. Toilet now functioning correctly with no leakage.

Returned to complete outlet installation service that was previously rescheduled due to equipment issues. Performed outlet testing using diagnostic tool to verify proper wiring and functionality. Will need to return with appropriate installation tool as current equipment was not functioning correctly at time of service.

Completed replacement of battery backup system for sump pump installation in basement utility area. Removed old battery backup unit and installed new one, ensuring proper electrical connections to control box and sump pump system. Verified system operation with successful test cycle and documented installation with photos of completed work.

Performed scheduled furnace tune-up on 5-year-old system. Inspected control board and wiring connections, confirming proper functionality of all electronic components. Examined complete system installation in utility room, verifying appropriate PVC venting configuration and overall unit condition. No issues identified; system operating within manufacturer specifications.

Performed routine maintenance on 4-year-old heating system. Inspected control board circuitry including DIP switches, LED display, and terminal connections. Examined blower motor assembly and verified proper electrical connections between control board and system components.

Responded to service call for non-functioning outdoor light. Removed existing fixture and installed customer-provided replacement motion-activated security light on exterior porch ceiling. Verified proper operation after installation and ensured all connections were secure and weatherproof.

Completed installation of new American Standard Champion toilet (comfort height, elongated bowl, 1.6 GPF) as quoted. Removed old toilet showing significant floor staining and drain discoloration. Properly sealed new unit to floor with appropriate caulking to prevent future water damage.

Conducted routine maintenance visit for MVP customer's furnace. Inspected hardware components including L-brackets and fasteners. Utilized hex key tool to tighten loose connections in the furnace assembly.

Performed scheduled MVP maintenance service on 22-year-old furnace. Removed front panel to inspect internal components including blower motor, circuit board, and wiring. Cleaned system and checked all connections, noting minor corrosion on heat exchanger components that remain functional.

Performed scheduled MVP heating maintenance service. Inspected electrical control panel components and wiring connections for proper functionality. Identified and replaced corroded L-shaped metal connector to ensure reliable system operation.

Performed inspection of existing sump pump system to provide replacement quote. System includes main pump in sump pit with several PVC discharge lines, wall-mounted control box, and battery backup unit. Observed water stains around pit area and evaluated electrical connections for both primary pump and backup system.

Responded to no-heat call for 8-year-old furnace. Upon inspection, discovered debris in blower wheel causing operational failure. Removed obstructions, cleaned blower assembly, and restored proper airflow. System now functioning correctly with normal heat output.

Responded to no-heat call for Trane furnace. Diagnosed faulty control board, which was removed and stored in container for reference. Installed replacement board and verified proper operation by testing airflow and temperature at registers using digital thermometer. System now functioning normally with consistent heat output.