HVAC, Plumber & Electrician Services in Fairlawn, OH

Completed scheduled MVP furnace maintenance visit. Performed comprehensive system inspection including examination of PVC venting configuration, verified proper operation of all components, and inspected air filtration system. Filter housing and mesh filter were assessed for proper fit and airflow. All mechanical components, including gas valve and ductwork connections, were found to be functioning within normal parameters.

Completed scheduled routine HVAC maintenance on a two-year-old Lennox air handler system. Inspected the unit, condensate drain lines, and ductwork connections, finding all components in proper working condition. Documented the existing air filter showing normal dust accumulation and discoloration consistent with regular operation, indicating the filter will require replacement at the next service interval to maintain optimal system efficiency.

Completed comprehensive HVAC system replacement estimate including furnace, evaporator coil, and ductwork modifications. Documented existing structural conditions showing exposed framing, electrical routing, and attic space access points to assess installation requirements and clearances for new equipment placement.

Completed MVP recurring maintenance service on geothermal heating system. Accessed control panel and inspected all internal components including inducer motor assembly, control board, electrical connections, and wiring harnesses. Verified proper operation of blower motor, relays, capacitors, and safety controls. Checked air filtration media and confirmed all electrical circuits functioning within specifications. Unit operating normally with no issues found.

# Electrical Estimate - Generator Conducted on-site evaluation for residential backup generator installation. Assessed existing 200-amp electrical service panel to determine compatibility and capacity for generator integration, documented current electrical infrastructure including main service disconnect and circuit breaker configuration. Provided comprehensive quote for whole-house generator system installation including necessary transfer switch, connection specifications, and electrical requirements based on panel assessment and home power needs.

# Service Summary Responded to service call for leaking toilet in upstairs bathroom of 1973-built single-family residence. Inspected toilet assembly, identified source of leak, and performed necessary adjustments to restore proper function and eliminate water seepage. # Work Performed Upon arrival, conducted thorough visual inspection of the toilet assembly including tank, bowl, supply line, and floor-mounted connections. Examined the chrome braided supply line and shut-off valve for signs of moisture or deterioration. Assessed the tank-to-bowl connection, flush valve assembly, and fill valve operation to isolate the leak source. Identified worn flapper valve and deteriorated tank-to-bowl gasket as primary causes of water leakage. Shut off water supply at the wall-mounted valve and drained the tank completely. Removed tank lid and disconnected supply line from tank inlet. Unbolted tank from bowl to access and replace the compromised rubber gasket between components. Installed new

Performed annual maintenance on 11-year-old gas furnace. Inspected ignition system using hex key for adjustments and conducted electrical diagnostics with clamp meter showing 5.2 amp reading. System operating within normal parameters after service.

Responded to service call for clogged kitchen sink in 50-year-old home. Inspected drainage system in basement utility area, which revealed significant buildup in the main vertical waste stack. Successfully cleared obstruction using auger and restored proper drainage function throughout kitchen plumbing system.

Performed routine MVP Heating maintenance service, inspecting furnace components and electrical systems. Examined control board wiring connections and circuit integrity, confirming proper operation of all electronic components. Verified condensate drainage system functioning correctly with no blockages in PVC piping.

Performed routine cooling maintenance on Lennox outdoor AC unit. Inspected fan motor and blower assembly for proper operation, cleaned unit exterior, and verified system is functioning correctly. All components in working order with no issues detected.

Completed installation warranty service of a tanked water heater system, including copper pipe configuration with multiple joints and connections. Installed expansion tank with proper brass fittings and resolved previous installation balance issue as requested.

Diagnosed faulty thermostat connections by inspecting internal wiring and terminal connections. Identified and repaired corrosion issues on copper refrigerant lines at the evaporator coil, restoring proper system operation and cooling function.

Completed installation of new dedicated circuit for tankless hot water heater in basement and upgraded subpanel due to rust damage from exterior conduit water infiltration. Expanded electrical capacity with multiple new outlets including dedicated refrigerator circuit, installed nine recessed can lights with dual dimmer control, and added two LED fixtures in panel area. Installed whole home surge protector for improved electrical system protection.

Performed scheduled heating tune-up, inspecting gas valve assembly and electrical connections. Verified proper function of all components including wiring (red, white, green, yellow) and PVC ventilation system. System operating within normal parameters with no issues detected.

Performed scheduled MVP Heating maintenance service on Lennox furnace unit. Inspected and noted dust accumulation on air filter requiring replacement. Service was temporarily interrupted due to power outage but was successfully completed after power restoration.

Performed scheduled MVP heating maintenance on Lennox furnace system. Conducted comprehensive inspection of furnace unit, including examination of ductwork connections, ventilation system, and condensate drainage components. All systems functioning properly with no issues identified; unit appears well-maintained with secure connections throughout.

Responded to service call for gate valve inspection on exterior water faucet. Examined copper pipe system with visible red manual wheel valve and verified proper operation. No leaks or damage observed in the plumbing infrastructure; all connections and insulated sections remain in good working condition.

Completed routine MVP heating maintenance service. Inspected furnace unit and associated components including PVC exhaust, copper lines, and connections. Checked PROFLO shutoff valve for proper operation and verified no signs of leakage at threaded connections.

Responded to a service call for a laundry drain backup in the basement. Upon inspection, found standing water and moisture around the utility area with the blockage occurring in the main drain line connected to the laundry appliances. Successfully cleaned out the clogged drain line, restoring proper drainage functionality and preventing further water accumulation on the concrete floor.

Performed complimentary electrical inspection per customer request. Examined main service panel and identified intermittent breaker tripping issues. Inspected meter installation (reading: 15638) and evaluated distribution panel, finding properly routed wiring with no visible damage or code violations, though some breakers showed signs of wear that may contribute to reported tripping problems.