Trusted HVAC, Plumbing & Electrical Services in Macedonia, OH

Removed and hauled away existing toilet from basement bathroom. Installed new comfort height American Standard Cadet toilet with new wax ring seal and water supply line, ensuring proper seating and leak-free connections.

Replaced 40-gallon tall Bradford White water heater under manufacturer warranty coverage. The existing unit remained under warranty through 2027, with the tank replacement covered by warranty while labor and additional materials were provided separately. Installed new water heater with proper connections to existing copper plumbing lines, ensuring all piping, fittings, and circulation pump were correctly integrated. Verified all connections for proper operation and system functionality upon completion.

Replaced 5.5-year-old Bradford White Defender 40-gallon gas water heater due to loss of hot water. Installed new Bradford White Defender unit with proper venting, connected copper supply lines, installed pressure relief valve with discharge piping, and mounted expansion tank. Verified all connections for leaks, tested gas valve operation, and confirmed proper hot water delivery throughout the system.

Conducted on-site evaluation for furnace replacement of seventy-year-old existing unit. Assessed current equipment condition, documenting aged components including deteriorated ductwork connections, existing piping configuration, and mechanical connections. Photographed installation area showing legacy equipment with significant wear, corroded fittings, and outdated venting systems requiring replacement. Provided comprehensive replacement estimate covering new furnace installation, updated ductwork connections, proper venting, and code-compliant mechanical and electrical integration.

Conducted service consultation for toilet replacement with customer requesting installation of a comfort-height toilet to accommodate mobility needs. Assessed existing standard-height toilet and bathroom configuration, noting current accessibility modifications including safety frame with padded supports. Provided recommendations for ADA-compliant comfort-height toilet options to improve accessibility and ease of use for the customer.

Completed comprehensive AC tune-up on Lennox outdoor condensing unit. Inspected and serviced indoor air handler, verified air filter condition showing normal dust accumulation within acceptable parameters, and confirmed proper system operation of all components.

Responded to service call for leaking shower head. Upon inspection, disassembled chrome shower fixture and replaced worn internal washer causing the leak. Tested water flow and verified no further dripping from shower head assembly. System restored to proper working condition.

Completed routine summer maintenance and tune-up on residential air conditioning system less than eight years old. Inspected outdoor condenser unit, verified proper operation of fan assembly, checked refrigerant lines, and examined condensate drain system for proper drainage and buildup. All components found operating within normal parameters.

Installed customer-supplied exhaust fan in bathroom, accessing attic space through ceiling hatch to verify and connect to existing electrical wiring. Unit was successfully mounted to ceiling, wired according to manufacturer specifications, and tested for proper operation.

Completed routine summertime maintenance on approximately 18-month-old air conditioning unit with no reported issues. Performed standard tune-up inspection, noting condenser coil had accumulated significant dirt, dust, and debris buildup across the fins. Inspected electrical control panel and wiring harness, which appeared clean, properly organized with secure zip ties, and showed no signs of damage or corrosion.

Responded to a follow-up service call for a persistent water leak at a backflow prevention assembly that was recently serviced. Upon inspection, identified minor leaking at pipe connections within the backflow system, which displayed significant age-related corrosion and patina on copper components. Evaluated all valves, connections, and mechanical components in the assembly, documented existing conditions with photographs showing the piping configuration, shut-off valves, and areas of concern for potential future repairs or component replacement recommendations.

Replaced a leaking 50-gallon A.O. Smith gas water heater with a new Navien NPE-240A2 tankless unit, relocating and mounting it to the south wall near the electrical outlet. Installed a condensate pump with discharge line tied into the existing furnace condensation drain, vented the unit through the side wall, and ran a recirculation line connected to the kitchen hot water supply for improved efficiency and faster hot water delivery.

Completed MVP cooling maintenance visit on 8-year-old residential HVAC system. Performed comprehensive inspection of air handler unit, control board, blower motor assembly, and all electrical connections. Verified proper operation of all system components, checked wiring integrity across multiple circuits, and confirmed control board functionality. System operating within normal parameters with no deficiencies noted.

Completed commercial backflow prevention device testing and inspection at facility. Tested backflow assembly, verified proper operation of check valves and test cocks, and documented compliance with local water authority requirements. Equipment showed signs of age with surface corrosion present on brass fittings and valve components, though all components functioned within acceptable parameters during testing.

Responded to service call for 12-year-old water heater with reported leaking and kitchen sink leak underneath. Upon arrival, performed visual inspection of water heater location and surrounding plumbing infrastructure in basement utility area. Documented existing conditions including copper supply lines, structural mounting, and overall installation configuration. Assessed water heater for signs of tank corrosion, valve leakage, and connection integrity. Evaluated kitchen sink plumbing connections beneath cabinet for source of reported leak. Provided customer with findings and recommendations regarding repair feasibility versus replacement options given age and condition of unit. Captured photographic documentation of installation area and plumbing system for reference and estimate preparation.

Completed first-time air conditioning and evaporator coil installation at residential property. Installed new A/C condenser unit with matching indoor evaporator coil, connected to existing Rheem Classic 90 Plus furnace system, verified electrical connections including fuse block installation, and ensured proper refrigerant line connections and system integration with existing ductwork and PVC ventilation piping.

Removed existing water heater and installed new Bradford White 50-gallon residential water heater in utility area. Positioned unit in water safety pan with drain line routed to nearby floor drain for code compliance. Replaced existing shut-off valve with code-approved shut-off valve and installed new thermal expansion tank to protect against pressure buildup. Modified carpet flooring as necessary to accommodate proper installation of water pan. Connected all copper supply lines and verified proper operation of all plumbing connections. Registered new water heater unit with manufacturer upon completion, activating 6-year warranty coverage.

# HVAC Maintenance - Cooling Completed scheduled preventive maintenance cooling visit on a 4-year-old system. Performed comprehensive system diagnostics using calibrated digital multimeter to verify electrical parameters and operational specifications. Measured voltage, amperage, and continuity at key system components to ensure proper electrical performance. Inspected blower assembly and ventilation components for proper operation and airflow. All electrical readings were within manufacturer specifications. System tested and confirmed operational. Documented service with photographic records of diagnostic measurements and equipment condition.

Completed annual air conditioning maintenance on 1-year-old system. Performed comprehensive inspection of electrical connections and terminals, verified proper wire terminations and voltage readings using digital multimeter. Addressed customer inquiries regarding thermostat operation and provided guidance on optimal system settings.

Conducted on-site consultation for new tank-style water heater installation in a 40-year-old residential property. Assessed existing water heater location in finished basement area, noting current configuration with copper supply lines, drainage connections, and proximity to HVAC ductwork. Evaluated mechanical room layout, clearance requirements, and existing plumbing infrastructure to determine optimal installation approach for replacement unit. Documented current equipment setup and surrounding utilities through photographic documentation for accurate equipment sizing and installation planning.