Blind & Sons: Trusted HVAC, Plumbing & Electrical Services in Massillon, OH

Completed HVAC system replacement estimate for 13-year-old unit with burned-out wiring. Assessed existing furnace installation in basement utility area with PVC venting and gas line connections, along with outdoor condensing unit mounted on PVC platform. Provided comprehensive quote for complete system replacement due to electrical component failure requiring extensive rewiring work.

# HVAC Install - A/C & Coil ## Summary Completed installation of air conditioning system with evaporator coil on second-floor application, including outdoor condensing unit placement and indoor coil integration with existing furnace system. ## Work Performed Installed new outdoor condensing unit on exterior foundation pad adjacent to existing gas meter infrastructure. Unit positioned on multicolored brick foundation area with proper clearance from building structure and utility connections. Secured condensing unit to pad and verified level installation for optimal compressor operation. Integrated new evaporator coil with existing gray metal furnace unit in basement utility room. Coil installed in proper airflow orientation within existing ductwork configuration. Connected supply and return air ducts to coil housing, ensuring sealed connections to prevent air leakage and maintain system efficiency. Ran refrigerant line set consisting of copper suction and liquid lines from outdoor

Hard piped a new gas line to the existing water heater by reusing the main branch tie-in point and installing a new shut-off valve. Built vertical piping with proper connections running to the unit, incorporating a union and sediment trap per code requirements. Successfully restarted the 17-year-old system and verified proper operation upon completion.

Responded to service call for non-functional outside front light fixture. Upon arrival, traced circuit from main electrical panel to identify proper breaker controlling exterior lighting. Diagnosed issue as tripped circuit breaker caused by moisture infiltration in exterior fixture. Reset breaker, tested fixture operation, and confirmed proper functionality. Recommended monitoring fixture for recurring issues that may indicate need for fixture replacement or additional weatherproofing.

Performed diagnostic inspection and pressure test on gas valves serving fireplace unit during customer's fireplace renovation project. Tested gas line connections and shutoff valves for leaks to ensure system integrity and safety prior to renovation work proceeding. All gas valves tested and confirmed secure with no leaks detected.

Diagnosed and resolved electrical issue with exterior garage lighting fixtures that ceased functioning following third-party security camera installation. Identified that the outlet circuit utilized for the camera installation had interrupted power supply to the existing outdoor LED light fixtures. Restored proper electrical connection to the garage exterior lighting, verified switch operation, and confirmed all fixtures returned to normal function.

Completed spring air conditioning tune-up and maintenance on a 15-year-old Tempstar cooling system. Performed comprehensive inspection of outdoor condenser unit, verified proper operation of condenser fan assembly, and confirmed system is functioning correctly. All components inspected and found to be in working order.

Conducted on-site assessment of existing HVAC system in basement mechanical room to provide replacement estimate. Evaluated current furnace/air handler unit, refrigerant line configuration, ductwork layout, and condensate drainage system. Documented existing equipment conditions including copper refrigerant lines with mounting brackets, flexible corrugated conduit, metallic ductwork with T-junction branching, and PVC condensate drain piping. Photographed installation for accurate equipment specifications and system configuration to prepare comprehensive replacement proposal.

Ran electrical wiring in basement utility area to supply power to pool heater equipment. Installed appropriate gauge wire through exposed ceiling joists, secured with proper mounting brackets, and coordinated routing with existing plumbing and gas line installations to ensure code-compliant clearances.

Replaced kitchen faucet with side spray unit and basement shower faucet assembly. The basement installation required replacement of the Central Brass 7223-A fixture due to deteriorated riser pipe that had rotted out. Parts were ordered for will call pickup, and photographic documentation was captured showing the existing conditions of both the kitchen sink area and basement plumbing installation prior to repair completion.

Responded to service call for Whirlpool tanked water heater that had been red-tagged by gas utility company due to missing sediment trap on gas line. Upon arrival, confirmed unit was shut down and tagged out of service for safety code violation. Inspected gas connection and plumbing configuration, verified absence of required sediment trap per code requirements. Customer also reported no hot water production prior to red tag issuance. Documented existing conditions including yellow flexible gas line connection, copper supply piping, and overall installation setup for code compliance assessment and repair recommendations.

Completed scheduled preventive maintenance cooling visit on residential HVAC system. Performed comprehensive inspection of evaporator coil, blower assembly, control boards, electrical connections, and refrigerant lines. All components found operating within normal parameters with no issues identified during this maintenance visit.

Completed comprehensive air conditioning tune-up on 4-year-old system. Performed system diagnostics using digital manifold gauges, recording vapor pressure at 91.2 psi with saturation temperature of 27.0°F and liquid pressure at 143.4 psi with saturation temperature of 50.1°F. Measured superheat at 19.3°F and subcooling at 6.0°F, confirming proper refrigerant charge and system operation within acceptable parameters.

Responded to water leak complaint and conducted thorough inspection of plumbing system. Located source of leak at corroded copper supply line mounted on wall, which exhibited significant rust and oxidation requiring immediate attention. Assessed surrounding plumbing infrastructure including flexible supply hoses and connecting fittings to ensure system integrity and proper function.

Completed routine preventive maintenance on Lennox air conditioning system. Performed comprehensive inspection of outdoor condenser unit and indoor evaporator coil assembly, verified proper operation of all components including heat exchanger, refrigerant lines, and copper U-bend tubes. Documented equipment condition with photos showing clean, well-maintained system operating within normal parameters.

Responded to service call for multiple faucet installations and plumbing fixture work. Installed chrome utility sink faucet with dual handles and arched spout on white basin in utility area, addressing existing rust staining and drainage concerns. Serviced bathtub faucet assembly and spout in bathroom with cream-colored fiberglass surround, resolving reported leak issue. Documented existing mineral deposits and surface staining on fixtures for customer awareness.

Conducted site assessment in basement utility area to provide estimate for installing hot water supply lines and natural gas lines for pool equipment. Evaluated existing plumbing infrastructure including copper water supply lines with shut-off valves and current gas piping configuration. Documented routing requirements through exposed floor joists and concrete block foundation wall to determine optimal path for new piping runs to exterior pool location. Photographed existing utility connections, available access points, and structural considerations for proposed installation work.

Completed MVP cooling maintenance visit on residential HVAC system consisting of Lennox furnace with integrated cooling components and Aprilaire humidifier. Performed comprehensive system inspection, verified proper operation of all equipment, documented system conditions through photographic records, and confirmed adequate airflow through ductwork and PVC condensate drainage lines.

Completed routine cooling maintenance visit on a 7-year-old air conditioning system. Upon arrival, found the outdoor condenser unit heavily soiled with accumulated dirt, debris, and grime on both the exterior surfaces and condenser coil fins. Performed thorough cleaning of the condenser coils to restore proper airflow and heat transfer efficiency. Inspected all electrical connections, refrigerant lines, and mechanical components. Documented equipment condition with photos showing significant improvement after service. Unit tested and operating within normal parameters upon completion.

Responded to drain leak at ninety-degree elbow in basement affecting kitchen and dishwasher drainage from first floor. Inspected existing copper/brass drainage piping in 1970s-era home and documented conditions in basement area. Assessed leak source at elbow joint and evaluated surrounding plumbing infrastructure to determine appropriate repair solution.