Blind & Sons: Trusted HVAC, Plumbing & Electrical Services in Massillon, OH

Installed recessed can lighting fixtures in residential bathroom ceiling to improve illumination. Completed electrical rough-in, fixture mounting, and final connections in accordance with local electrical code requirements.

Responded to water leak in first-floor ensuite bathroom with visible damage at window frame and shower enclosure. Upon inspection, identified active slow drip originating from overhead plumbing, causing water intrusion at window sill with brownish discoloration and moisture damage to surrounding drywall. Traced leak source to faulty supply line connection serving second-floor fixtures. Accessed plumbing chase and replaced deteriorated compression fitting and section of corroded supply pipe. Verified shower door frame exhibited rust corrosion at base track from prolonged moisture exposure; cleaned and sealed metal components to prevent further deterioration. Tested all repaired connections under full pressure with no leaks detected. Recommended monitoring affected areas for additional moisture issues and potential mold remediation given extent of existing water staining.

Returned to site to adjust and level furnace and generator units that were previously pitched backward. Lowered the front of both units to achieve proper forward pitch, ensuring correct drainage and operational positioning. Adjusted mounting brackets and verified level across all mounting points to prevent condensate backup and maintain manufacturer specifications.

Completed preventive maintenance cooling tune-up on 4-year-old Lennox condensing unit as part of recurring service agreement. Performed comprehensive system inspection, verified proper operation of all components, cleaned condenser coils, checked refrigerant levels and pressures, tested electrical connections, and confirmed optimal system performance. Unit operating within manufacturer specifications with no issues identified.

Returned to property on warm, dry day to perform refrigerant leak search on HVAC system as previously scheduled. Connected manifold gauge set to service valves and conducted thorough pressure testing and visual inspection of copper refrigerant lines, fittings, and coil connections throughout the outdoor condensing unit. Inspected all brazed joints, U-bends, and compression fittings for signs of oil residue or refrigerant leakage while system was under operating pressure.

Provided estimate for replacement of existing 40-gallon gas water heater located on second floor. Assessed current Rheem Professional unit installation including copper supply lines, brass fittings, black metal flue pipe venting system, and PVC drainage connections within exposed framing utility space. Documented existing configuration and prepared competitive quote for complete water heater replacement.

Completed installation of 18kW standby generator with 200-amp automatic transfer switch and cold weather kit for reliable backup power operation in freezing conditions. Ran 30 feet of electrical line from main service panel to transfer switch location and 30 feet of gas line to fuel the generator unit. Installed and wired transfer switch with proper circuit breaker configuration, established all necessary electrical connections between main panel, transfer switch, and generator, and secured all conduit runs and gas piping to building exterior per code requirements.

Responded to no heat call on natural gas furnace. Upon inspection, accessed unit interior and verified all electrical connections and control components. Documented equipment condition including Honeywell gas valve assembly and internal wiring configuration for service records.

Installed 40-gallon Bradford White water heater, requiring rework of existing copper water lines to accommodate the taller tank configuration. Removed existing laundry sink and properly capped off associated water supply lines. Installation included mounting expansion tank, connecting copper supply and distribution piping with appropriate valves and fittings, and integrating all electrical connections to code. All plumbing connections tested and verified for proper operation and leak-free performance.

Completed early morning air conditioning tune-up service on residential split system. Performed comprehensive inspection of outdoor condenser unit, noting light debris accumulation on coil fins which was cleaned during service. Inspected indoor air handler and associated refrigerant lines, condensate drainage system, and ductwork connections in mechanical room. All components found operating within normal parameters with no immediate concerns identified.

Completed installation of dishwasher drain assembly including strainer components and dish master system. Installed black PVC drainage piping with corrugated flexible discharge hose and clear tubing connections through wall framing. Installed Grundfos circulator pump with copper piping connections for hot water recirculation system. Matrix service charge covered all strainer and dish master installation components. Collected partial payment deposit with balance due upon completion. Parts were ordered for shop delivery, received, and installation completed as scheduled.

Conducted no-charge estimate visit for tankless water heater installation at owner-occupied residence approximately 66 years old. Assessed existing Whirlpool conventional tank water heater currently installed in basement utility area, documenting unit condition, existing plumbing connections including copper supply lines, electrical service availability, and venting configuration. Evaluated structural requirements, gas line capacity considerations, and necessary modifications for tankless conversion including upgraded electrical service, proper venting pathway, and water supply line adjustments. Photographed current water heater installation and surrounding mechanical space to determine optimal placement and identify potential installation challenges specific to older home construction.

Completed installation of new 80% efficiency gas furnace in residential utility closet. Unit installed alongside existing water heater with proper clearances maintained, supply and return ductwork connected, venting routed through existing infrastructure, and all gas and electrical connections made to code. System tested and verified operational.

# Main Drain Cleanout Responded to a main drain backup issue in a 70-year-old residential property where wastewater was overflowing onto the basement floor. Upon arrival, assessed the basement utility area and located the floor drain exhibiting active backup with visible water staining and discoloration on the surrounding concrete surface. Deployed professional drain cleaning equipment, including a power auger with flexible cable, to access and clear the main sewer line. Worked systematically through the floor drain access point to break up and remove the obstruction causing the slow drainage and backup condition. The blockage was consistent with typical accumulations found in aging residential plumbing systems, including years of buildup from grease, soap residue, and organic debris. Successfully cleared the main drain line and restored proper flow. Conducted water flow testing to verify complete clearance and confirm the drain was functioning at optimal capacity. Inspected the flo

Conducted comprehensive on-site assessment for complete HVAC system replacement in residential utility area. Evaluated existing furnace and air conditioning equipment, including aged ductwork with visible weathering and discoloration. Documented current system configuration featuring green furnace unit with metal supply ductwork, air handler components, and associated condensate drain lines. Photographed all mechanical equipment, PVC piping, flexible ductwork connections, and clearance spacing for replacement planning. Prepared detailed replacement estimates for both furnace and air conditioning systems, accounting for existing infrastructure layout and accessibility requirements in basement mechanical room. Provided customer with multiple equipment options and scheduling information for proposed installation.

Re-plumbed kitchen sink following new countertop installation, including reinstallation of garbage disposal unit and all associated drain assemblies. Disassembled existing disposal and drain components, cleaned and inspected all fittings and connections, then reassembled the complete under-sink plumbing system with proper alignment to accommodate the new counter configuration.

Conducted on-site assessment for furnace replacement due to no heat condition. Evaluated existing Comfortmaker HVAC system and water heater installation in residential utility closet, documented equipment specifications and configuration, photographed current setup including copper piping connections and brass fittings, and prepared comprehensive replacement estimate for new heating system.

Removed existing dining room and back room light fixtures and installed fandelier units at both locations utilizing pre-existing metal junction boxes. Fished new electrical line from living room outlet near television location, routing power down through wall cavity and back up to newly installed two-gang box behind TV for entertainment console integration. Removed complete intercom system including main control unit and four remote stations throughout residence, traced and disconnected power source, and cut back all associated low voltage wiring. Replaced doorbell system with new unit and relocated chime to entry closet for concealment.

Responded to no-cooling call on system with previous PSCB installation from March 2020. Inspected electrical components and verified proper installation of copper piping connections. System restored to normal operation with air conditioning unit cycling on as designed.

Responded to service call for furnace producing loud humming noise on unit approximately 4 years old that we originally installed. Upon inspection, verified system operation and examined all accessible components including ductwork, filtration system, and mechanical areas. Air filter was found to be in clean condition with proper installation within wooden frame housing. Documented current system condition with photos for service records. Unit operational at time of inspection.