Blind & Sons: Trusted HVAC, Plumbing & Electrical Services in Massillon, OH

Completed routine maintenance visit on 6-year-old air conditioning system. Performed comprehensive inspection of outdoor condenser unit, verified blower wheel assembly operation, and assessed ductwork condition for potential cleaning needs. Unit found in operational condition with minor debris accumulation on top screen, which was noted for future service consideration.

Responded to water leak at toilet base with visible pooling after flushing. Upon inspection, confirmed failed wax ring seal causing water to seep from beneath toilet bowl onto carpeted bathroom floor. Removed toilet, scraped old wax ring and flange residue, inspected closet flange for damage and proper mounting. Installed new wax ring with plastic horn, reset toilet with new closet bolts, torqued to manufacturer specifications, and reconnected water supply line. Tested multiple flush cycles to verify proper seal and confirmed no leakage at base. Advised customer on signs of future seal failure and recommended monitoring for any moisture.

Completed preventive maintenance cooling visit on residential Lennox HVAC system with auxiliary air handler. Performed standard system diagnostics including electrical measurements with multimeter to verify proper voltage and amperage across components. Inspected furnace, air handler, PVC condensate drainage lines, and associated ductwork. All equipment operating within normal parameters. System ready for continued cooling season operation.

Completed full replacement of first floor bathroom group drain line system over a two-day period. Removed existing deteriorated drainage piping and installed new PVC drain lines to all fixtures, including a new closet flange for the toilet. Work involved removing and reinstalling the toilet, running new branch lines to each fixture, and ensuring proper venting and drainage slope throughout the system. All connections were properly fitted and secured with appropriate brackets and supports to structural members in the basement area. System was tested for proper flow and verified leak-free operation upon completion.

Completed scheduled BS-MVP cooling maintenance visit on 4-year-old air conditioning system. Performed comprehensive inspection of blower motor assembly and associated control electronics, verifying proper operation of motor, capacitor connections, and control board functionality. Inspected air filter and documented moderate dust accumulation; filter shows normal wear pattern for service interval with visible dirt and debris collection across fibrous material, indicating adequate airflow filtration. All electrical connections, wire harnesses, and low-voltage control wiring examined and found secure with no signs of overheating or damage. System operating within normal parameters at time of service.

Completed standard AC tune-up on residential split system located in basement mechanical room. Inspected Trane furnace and associated ductwork, noting moderate dust accumulation on evaporator coil fins. Performed visual inspection of system components, verified proper operation, and documented equipment condition through photographs. Unit operational upon completion of service.

Completed MVP cooling maintenance visit on 15-year-old system. Performed comprehensive tune-up including inspection of electrical components, capacitors, and wiring connections. Observed condensation on ductwork and verified proper system operation. Completed additional preventative maintenance on neighboring unit as requested.

Completed routine HVAC maintenance visit for cooling system, performing comprehensive inspection of control board assembly and electrical components. Inspected multi-zone control panel housing containing three circuit boards with associated wiring harnesses, verified proper connections and component integrity, and examined fuse assembly to ensure electrical protection systems were functioning correctly within manufacturer specifications.

Completed MVP recurring cooling maintenance visit on residential HVAC system. Performed comprehensive inspection of outdoor condensing unit, documenting coil condition showing moderate accumulation of dirt and debris on fin surfaces typical of normal operational exposure. Inspected indoor air handler control board and electrical components, verifying all wire connections, capacitors, and relay functions. All system components operating within normal parameters at time of service.

Installed five Ring Outdoor Cam Plus security cameras with hardwired electrical connections at commercial building exterior per customer request. All cameras were mounted, wired to building electrical system, and verified operational before completion deadline.

Accessed ceiling opening to investigate shower drain leak originating from PVC piping penetration through concrete shower pan. Inspected exposed drain trap assembly and identified water intrusion around pipe-to-pan connection point requiring repair or replacement of shower pan waterproofing system.

Completed scheduled MVP cooling maintenance visit on 9-year-old residential air conditioning system. Upon inspection, found condenser coils heavily soiled with accumulated dirt, dust, and debris significantly restricting airflow through heat exchange surfaces. Removed access panels and thoroughly cleaned condenser coils using appropriate methods to restore proper heat transfer efficiency. Cleared debris from unit perimeter and verified all drainage lines were functioning properly. System operational following service.

Responded to callback for furnace leak issue. Upon arrival, inspected condensate drainage system and PVC piping configuration. Examined T-junction arrangement and associated fittings for signs of moisture accumulation or active leaking. Documented existing conditions with photographs showing discoloration and dirt buildup on pipe surfaces, indicating potential long-term drainage concerns. Verified all connections at valve assembly and condensate trap components for proper sealing and functionality.

Completed full HVAC system installation including an 80% efficiency furnace in the basement mechanical room and matching air conditioning condenser unit on the exterior of the residence. The new furnace was properly positioned on the basement floor with all ductwork connections secured and routed through the ceiling joists, while the outdoor AC unit was installed against the house siding with electrical connections completed and protected. Both units were tested for proper operation and airflow to ensure the complete heating and cooling system functions as designed.

Installed a 40-gallon tall water heater with all required code upgrades, including expansion tank, pressure relief valve with proper discharge piping, and shut-off valve assembly. All components were properly labeled and tagged, with installation date documented on the expansion tank for future reference.

Responded to emergency water leak originating from primary bathroom and causing ceiling damage in living room below. Upon inspection, identified shower drain assembly as source of leak, with water penetrating through compromised waterproofing membrane around hexagonal tile floor installation. Documented plumbing configuration including exposed gray PVC drainage lines and assessed extent of water intrusion causing ceiling buckling in affected area below.

Responded to service call for air purification system displaying error code indicating water panel replacement required. Inspected HVAC system and documented heavily soiled furnace filter showing significant dust and debris accumulation throughout pleated media. Replaced dirty air filter with new unit to restore proper airflow and system efficiency. Addressed water panel maintenance requirement to clear error code and return air purifier to normal operation.

Responded to a recurring kitchen sink blockage affecting both basins. Upon inspection, discovered the issue had persisted despite a previous service call that addressed a faucet repair. Accessed plumbing system through crawl space to diagnose drainage obstruction. Identified corroded copper fittings and compromised drainage connections contributing to the blockage. Cleared the clog and assessed the condition of supply lines and drainage components to prevent future occurrences.

Responded to service call for leaking conventional tank-style water heater. Upon arrival, inspected unit and identified significant rust staining on exterior of tank with active leaking from bottom of vessel. Documented condition with photographs showing vertical rust streaks indicating corrosion and tank failure. Explained to customer that tank-style water heater had reached end of service life and replacement was necessary, as bottom leaks indicate internal tank deterioration that cannot be repaired.

Conducted comprehensive site assessment for Generac generator installation at residential property. Evaluated exterior utility meter location and electrical service entry point on building exterior, documented existing gas line infrastructure and clearance requirements from building openings and landscaping features. Inspected basement electrical panel location and available routing paths through unfinished basement space, assessed ceiling joist configuration and existing conduit pathways for transfer switch installation and generator circuit integration. Documented suitable mounting locations considering foundation vents, utility connections, and setback requirements for code compliance. Provided detailed photographic documentation of service entrance equipment, basement infrastructure, and proposed installation area to support accurate material takeoff and labor estimation for automatic standby generator system.