Air Conditioning, Heating, Electrical & Plumbing Services in Uniontown, OH

Responded to service call for 15-year-old electric water heater not producing hot water. Upon assessment, determined unit required replacement per customer request. Completed full water heater replacement, installing new Rheem electric tank unit in basement utility area. Disconnected existing copper supply lines, drained old tank, and removed from service. Installed replacement unit with proper connections to existing plumbing infrastructure, including hot and cold water copper lines secured to overhead framing. Verified all electrical connections via flexible metallic conduit, ensured proper grounding, and tested unit operation. System restored to full functionality with hot water delivery confirmed.

Completed routine maintenance on residential standby generator unit located in backyard. Performed standard inspection of all mechanical components, verified proper operation of control panel indicator light and connection ports, checked ventilation louvers for obstructions, and confirmed unit remains in functional condition with housing integrity intact.

Completed comprehensive AC tune-up including inspection of electrical components and humidifier system. Removed and examined contactor assembly with dual fuses, verified proper operation and connections. Inspected humidifier evaporator pad for mineral buildup and airflow efficiency, confirmed unit accessibility and all electrical connections secure.

Completed MVP heating maintenance visit on Lennox system. Performed standard heating system inspection, verified operational status of furnace components, and documented equipment condition with photos. Unit accessible at exterior location with refrigerant lines and electrical connections in satisfactory condition.

Responded to no cooling complaint on four-year-old residential air conditioning system. Upon arrival, performed complete system diagnostics using digital manifold gauges and temperature probes. Found system operating with suction pressure of 108.0 psi and discharge pressure of 145.2 psi on R410A refrigerant. Measured suction line temperature at 54.0°F with corresponding saturation temperature of 35.3°F, indicating superheat of 18.7°F. Liquid line temperature measured 43.6°F with saturation temperature of 50.8°F, showing subcooling of 7.2°F. Inspected dual run capacitor which showed signs of age and weathering. System readings indicated potential low refrigerant charge or airflow restriction affecting cooling performance. Documented all pressure and temperature readings for service records and provided recommendations for restoring optimal system performance.

Completed comprehensive AC tune-up and maintenance inspection on residential air conditioning system. Performed visual inspection of air handler unit, examining electrical control panel and wiring connections for proper operation and safety compliance. Inspected return air filter, noting accumulated debris and particulate matter trapped in filter media, indicating normal filtration function. Checked all electrical connections, terminal blocks, and relay components within control panel for secure mounting and proper wire routing. Verified all safety labels and warning placards remain legible and in place. System operational and ready for cooling season.

Responded to service call for 7-year-old Generac natural gas generator displaying battery check warning message. Performed diagnostic inspection of unit, verified operational status with green indicator light illuminated, and assessed battery condition and charging system. Documented equipment condition with photos showing outdoor installation on gravel pad with visible weathering on exterior housing.

Completed preventive maintenance tune-up on 5-year-old air conditioning system per customer request. Performed comprehensive inspection of system components including air filter, control board, electrical connections, and refrigerant circuit. All components found operating within normal parameters with no deficiencies noted.

Completed scheduled MVP furnace maintenance visit and performed comprehensive system inspection. Accessed interior components, verified structural integrity of mounting brackets and support framework, and inspected electrical wiring harness connections for proper routing and secure terminations. All mechanical components and wiring found in acceptable operating condition with normal wear patterns observed.

Completed comprehensive furnace tune-up and system inspection. Identified heavily soiled air filter with significant dust and debris accumulation throughout the mesh structure, restricting proper airflow to the system. Recommended filter replacement to restore optimal system performance and indoor air quality.

Completed early season air conditioning tune-up on residential system. Upon inspection, discovered evaporator coil heavily contaminated with dust and debris accumulation, significantly restricting airflow and reducing system efficiency. Cleaned evaporator coil thoroughly, inspected electrical connections and capacitor in control panel, verified all wiring secure and properly terminated. System operational following service.

Responded to service call for leaking humidifier on HVAC system. Upon inspection, discovered significant rust and corrosion on the humidifier mounting bracket and water distribution components. The leak originated from deteriorated water feed line connections and corroded metal surfaces that had compromised the unit's water containment integrity. Documented existing conditions with photos showing extensive rust damage on horizontal support bracket and aging filter assembly. Performed diagnostic evaluation and provided customer with repair options and recommendations for addressing the moisture infiltration issue to prevent further system damage.

Responded to service call for non-functional hot water heater in a 20-year-old residential property. Upon arrival, inspected the Bradford White Defender Safety System tanked water heater and associated plumbing infrastructure. Diagnosed system failure and performed necessary repairs to restore hot water functionality. Verified proper operation of expansion tank with pressure relief connections, inspected all copper supply and distribution lines for integrity, and tested shut-off valves and safety systems. Confirmed water heater returned to normal operating parameters with adequate hot water delivery throughout the residence.

# Service Summary Responded to service call for well water system with odor issues at residence with existing water softener. Homeowner recently relocated to property and unfamiliar with water treatment system operation. # Work Performed Conducted comprehensive evaluation of existing well water treatment system including water softener and associated plumbing infrastructure. Inspected Rheem Professional water heater installation with copper supply lines and verified proper venting through galvanized flue pipe. Assessed water quality concerns related to sulfur odor commonly associated with well water systems containing hydrogen sulfide gas or sulfur bacteria. Examined water softener unit for proper operation, salt levels, and regeneration cycle functionality. Tested water quality parameters to identify source of odor issues. Determined that water softener alone was insufficient to address hydrogen sulfide contamination present in well water supply. Provided homeowner education on w

# HVAC Estimate - Replacement Summary Conducted comprehensive on-site evaluation for complete HVAC system replacement. Assessed existing furnace and air conditioning equipment located in interior utility closet, documenting current unit specifications and installation configuration. Evaluated attic space accessibility and existing ductwork infrastructure to determine optimal replacement system specifications and installation requirements for new heating and cooling equipment.

Completed scheduled maintenance on Trane XV80 furnace in basement utility room. Inspected heat exchanger, checked ventilation system, and noted condensation on exhaust ducting. All components functioning within normal parameters; system ready for continued operation.

Successfully replaced two customer-supplied lavatory faucets with new angle stops in the hall bathroom and basement. Removed existing plumbing components and installed new tubular trap in the first-floor bathroom, while the basement lavatory required cutting off the PVC fitting and installing a new ABS trap adapter with appropriate connections.

Responded to service call for water softener issues causing black discoloration in water and brown toilets. Upon inspection, discovered significant mineral buildup and sediment in faucet aerator indicating system failure. Cleaned affected aerators and recommended complete water softener regeneration and system maintenance to resolve discoloration issues throughout the home.

Successfully installed two customer-provided faucets in a 30-year-old home, ensuring proper connection of supply lines and drain assemblies with functional P-trap configurations. Additionally, resealed toilet to prevent leakage, with all installations verified for proper operation and absence of leaks.

Diagnosed Generac whole house generator failure issue that prevented operation during recent power outage. Identified fault code on control panel associated with yellow warning light, performed system reset and cleared error codes. Conducted full system diagnostic test, replaced clogged air filter, and verified proper voltage output during simulated power outage test to confirm unit now functions correctly.