Air Conditioning, Heating, Electrical & Plumbing Services in Uniontown, OH

Performed comprehensive furnace tune-up including inspection of internal mechanical components and thorough examination of control board circuitry. Verified proper wire connections and component functionality on the main circuit board, ensuring all electrical systems are operating within manufacturer specifications.

Diagnosed portable generator displaying "over crank" error message. Inspected unit's electrical components and control panel with green indicator light. Verified proper connection of wiring and reset system which resolved the starting issue.

Responded to service call for clogged kitchen sink and leaking faucet. Inspection revealed significant water damage to cabinet flooring beneath sink area, likely from ongoing leak at garbage disposal connection or faucet assembly. Replaced faulty kitchen faucet and cleared drain blockage, restoring proper drainage and eliminating leak.

Diagnosed 17-year-old 17kW generator failure that did not automatically engage during two recent power outages. Performed comprehensive system inspection, tested control panel functionality and verified temperature readings. Identified and cleared debris from transfer switch components that was preventing proper operation.

Replaced faulty generator controller under warranty. Installed new controller received from Generac and verified proper operation of unit after installation.

Diagnosed and repaired hot water issue affecting shower in secondary bathroom. Inspection of tanked water heater revealed temperature setting was improperly adjusted. Recalibrated thermostat settings and confirmed proper hot water flow to all fixtures.

Diagnosed furnace that was repeatedly shutting down and requiring breaker reset. Inspected control board and wiring connections, finding several loose wire terminals at the circuit board which were causing intermittent operation. Secured all electrical connections and verified proper operation through multiple test cycles.

Performed standard MVP heating system maintenance service, inspecting the water supply plumbing components including the copper pipe with blue shut-off valve and insulation. Examined the control circuit board for proper operation, verifying all wire connections (white, yellow, blue, green, pink, and black) were secure and that electronic components showed no signs of damage or failure.

Performed annual furnace maintenance check. Inspected system pressure gauges and verified proper operating parameters. Rescheduled remaining service for 02/27/26 at customer's request.

Completed scheduled BS-MVP Heating Visit on 10-year-old system. Inspected Lennox control module which was operational with proper wire connections and illuminated indicator light. Examined air filter which showed normal usage wear with intact diamond-pattern mesh and frame structure.

Successfully installed a new Lennox furnace unit in the basement, including proper connection of all metal ductwork components and integration with the existing Aprilaire humidifier system. Completed installation with appropriate PVC drainage piping and verified system functionality before concluding the first stage of the job.

Performed annual preventative maintenance visit on a 1-year-old Bryant/MVP heating system. Inspected furnace control board, electrical connections, and ventilation components. System is operating within normal parameters with no issues detected.

Performed routine furnace maintenance service, including inspection of ventilation system and verification of control board functionality. Recommended replacement of air filter (2410-413) which was not on hand during service. Rescheduled for completion at later date.

Performed generator maintenance service including diagnostic battery testing. Installed drainage system with flexible hose connection to ensure proper condensate removal. Generator was successfully serviced and is now operating within normal parameters.

Performed routine maintenance on 3-year-old MVP gas furnace, including inspection of condensate drain system and examination of air intake components. Observed minor dust accumulation around drain base which was cleaned to ensure proper drainage function, and verified integrity of protective mesh covering on ventilation system.

Responded to service call for furnace that was not operating properly. Diagnosed system displaying two error codes, with thermostat showing incorrect temperature readings (displaying 81°F while set to 72°F). Performed maintenance by replacing UV bulb and humidifier pad, resolving the issues and restoring normal operation.

Performed scheduled MVP heating maintenance service. Inspected system and replaced air filter, ensuring proper installation with correct airflow direction. Used hex key to access components and complete comprehensive heating system check.

Performed routine maintenance on 5-year-old gas furnace, including inspection and testing of control board circuitry and electrical connections. Soldering repairs were completed on wiring connections to ensure proper system operation, and ductwork was evaluated for potential cleaning needs.

Performed estimate for replacement of 14-year-old furnace with confirmed heat exchanger crack. Visual inspection revealed unit is installed in utility area with proper duct connections. Recommended full replacement due to safety concerns with failed heat exchanger.

Successfully completed installation of a model 600 humidifier unit on the customer's HVAC system. The installation included proper mounting, connection to existing ductwork, and configuration of the digital control interface. System was tested and is functioning as designed to maintain optimal indoor air quality.