Your Trusted HVAC, Plumbing & Electrical Experts in Wadsworth, OH

Performed routine maintenance flush on 5-year-old automatic storage water heater operating without issues. Drained sediment buildup from tank bottom, verified proper function of temperature and pressure relief valve, and inspected all copper supply lines and brass fittings for leaks. Conducted whole-home water pressure test at multiple fixtures to ensure system pressure within optimal range of 40-80 PSI. Confirmed expansion tank proper charge and verified all connections secure. Unit returned to normal operation with no deficiencies noted.

Responded to no cooling call on 4-year-old air conditioning system. Unit was running but failing to reach thermostat setpoint. Upon inspection, found failed capacitor preventing compressor from operating at full capacity. Replaced defective capacitor with properly rated component, restored all electrical connections, and verified system operation. Unit now cooling properly and maintaining desired temperature.

Performed comprehensive HVAC system evaluation for 47-year-old air conditioning system located in basement utility area. Assessed existing beige air handling unit with metal ductwork configuration, documented electrical panel condition showing older Stab-Lok load center with signs of age, and provided replacement estimate for complete system upgrade due to equipment age exceeding typical service life expectancy.

Responded to service call for leaking 6-year-old residential water heater requiring replacement. Upon inspection, confirmed active leak from existing tank unit necessitating immediate replacement to prevent water damage. Installed new Bradford White 50-gallon electric water heater (Model RE350S6-1NCWH) with dual heating elements rated at 4500W/3500W operating at 240V/208V single-phase. Connected all supply and discharge piping with proper shut-off valves, installed temperature and pressure relief valve, and verified all electrical connections to junction box. Tested unit for proper operation, confirmed no leaks at connections, and ensured system met manufacturer specifications and local code requirements.

Completed MVP recurring cooling maintenance visit that was rescheduled from previous date. Performed comprehensive system inspection of outdoor condensing unit and indoor air handler components. Removed and inspected electrical control panel on condensing unit, verifying proper operation of dual run capacitors, contactor, and all associated wiring connections. Checked all wire terminations for tightness and signs of overheating or deterioration. Accessed indoor air handler unit to inspect blower motor assembly, control board, and electrical connections throughout the system. Verified proper motor operation and examined all color-coded wiring harnesses for secure connections at terminal blocks. Documented system conditions with detailed photography of internal components for maintenance records. All electrical components functioning within normal parameters. System operating as designed with no deficiencies noted.

Completed MVP recurring cooling maintenance visit on residential air conditioning system. Performed standard preventive maintenance procedures on outdoor condenser unit, including inspection of cabinet condition, fan operation, and refrigerant line connections. Unit operational and ready for continued service.

Replaced both non-functioning stop valves under upstairs bathroom sink. Removed old valves and installed new supply valves on hot and cold water lines with braided stainless steel supply lines connected to proper fittings. All connections tested and verified leak-free with proper shut-off operation restored.

Relocated two inconveniently positioned basement shut-off valves to accessible locations and installed new ball valves for improved operation. Replaced two aging, leaking exterior hose bibs in the garage with new frost-free faucets, including complete copper supply line replacement with new pipes and fittings from the relocated shut-off valves to the exterior wall penetrations.

Responded to service call for air conditioning unit experiencing overheating issues and operational problems due to excessive dirt accumulation. Upon inspection, found outdoor condenser unit with heavily clogged heat exchanger fins and significant debris buildup restricting proper airflow. The condenser coils were severely contaminated with dust, dirt, and environmental contaminants, which was causing reduced heat transfer efficiency and contributing to system overheating. Documented unit condition with photographs showing the extent of contamination on all accessible surfaces of the equipment.

Completed installation of 14kW standby generator system with 16-circuit partial transfer switch and oil warmer for cold weather operation. Ran 85 feet of generator wire from unit to transfer switch and coordinated with gas utility contractor for 20 feet of gas line installation with hand-dug trench. No external disconnect required per system specifications and local code requirements.

Responded to emergency service call for outdoor spigot that would not shut off. Located and identified the interior shut-off valves in the basement that control the exterior hose bibs, which were previously unknown to the homeowner. Successfully shut off water supply to the malfunctioning outdoor spigot using the brass shut-off valves mounted on the wooden plate near the main water supply line, stopping the continuous water flow and resolving the immediate emergency.

Responded to reported "toilet rain" issue at 20-year-old residential property. Upon arrival, removed toilet tank lid and conducted internal inspection of flush mechanism components. Found aged internal parts with significant mineral deposits, rust staining, and discoloration throughout tank interior. Identified deteriorated flapper valve, fill valve assembly with float ball, and flush handle mechanism showing signs of wear consistent with original installation age. Documented existing conditions of tank components including corrosion and mineral buildup affecting proper operation. Photographed toilet bowl with cleaning product present and complete tank interior showing all mechanical components requiring attention for proper flush cycle operation.

Completed full HVAC system installation in basement, including 80% AFUE gas furnace with matching air handler unit and associated ductwork. Installed new insulated supply plenum and metallic flex duct connections to existing distribution system. Mounted and connected humidifier accessory to furnace unit for enhanced indoor air quality. All equipment properly positioned on concrete floor with appropriate clearances from concrete block walls and structural framing. Verified all electrical connections, gas line connections, and condensate drainage routing. System tested and operational.

Responded to complaint of inconsistent airflow to basement area in home with multiple thermostats and 15-year-old geothermal system. Performed system evaluation and traced ductwork routing from geothermal unit serving main floor. Inspected basement zone dampers and duct distribution network in exposed ceiling areas to identify airflow restrictions and zoning control issues affecting basement conditioning.

Completed routine maintenance visit on a 5-year-old air conditioning system for MVP customer. Performed standard system inspection including electrical control panel examination, verified all wiring connections and control components were functioning properly, and documented equipment condition through photographic records.

Completed MVP cooling maintenance visit on 3-year-old residential HVAC system. Performed comprehensive inspection of outdoor condensing unit electrical components, including capacitor and contactor functionality testing, verified proper wire connections and terminal integrity, and inspected disconnect panel condition. Evaluated indoor Lennox furnace and Aprilaire air handler assembly, checked refrigerant lines, condensate drainage system, and overall system operation to ensure optimal cooling performance for the season.

Performed routine preventive maintenance on 8-year-old Lennox air conditioning system for MVP customer. Conducted electrical diagnostics using clamp meter to measure amperage and voltage at the condensing unit, tested capacitor operation with multimeter leads, and verified proper electrical performance of outdoor unit components. All systems operating within normal parameters upon completion of service visit.

Installed new electrical service including dedicated circuits for furnace and air conditioning system. Mounted exterior conduit, junction boxes, and electrical infrastructure to building exterior wall per code requirements. Completed panel labeling and final connections over multiple appointments to ensure proper system integration and compliance.

Completed comprehensive tune-up on 13-year-old residential air conditioning system with Lennox furnace and outdoor condensing unit. Performed full system inspection, cleaned condenser coils, checked refrigerant levels, tested electrical connections, and verified proper airflow throughout the system. Customer renewed maintenance plan agreement at time of service.

# HVAC Cooling Maintenance Completed Performed comprehensive cooling system maintenance on residential air conditioning unit. Conducted thorough inspection of electrical components, revealing severely corroded capacitor with deteriorated top surface and aged wiring connections. Assessed overall system condition, noting significant dust and debris accumulation throughout cabinet interior indicating extended service interval. Evaluated all electrical connections, refrigerant lines, and mechanical components. System showed normal environmental wear consistent with outdoor installation and extended operation period. Documented component conditions with detailed photography for service records and future reference.