Your Trusted HVAC, Plumbing & Electrical Experts in Wadsworth, OH

Conducted site assessment for installation of macerator/drain pump system for basement sink in single family residence with no existing waste pump infrastructure. Evaluated structural framing, existing plumbing lines, and electrical routing through floor joists to determine optimal installation location and connection points for new SaniFlo-type system. Documented existing PVC drain lines, copper water supply, and available access points through floor cavity for future pump discharge line integration.

Responded to service call regarding recently installed generator that was not properly leveled. Upon arrival, used precision leveling tools to assess the unit's current position and confirmed the generator was out of level. Adjusted and leveled the generator to manufacturer specifications, ensuring proper orientation for optimal operation and longevity of the equipment. Verified final levelness with torpedo level and documented the corrected installation with photographs for service records.

Responded to a floor drain obstruction caused by a golf ball that entered a 2" floor drain connected to a grinder pump crock. Attempted multiple methods to clear the obstruction, including running water from the water heater through the floor drain to flush the golf ball into the crock, but was unsuccessful in dislodging it. Used solder wire to probe the drain trap for obstructions with no detectable blockage found in the trap itself. Due to the small diameter of the drain line, camera inspection and mechanical snaking were not viable options for retrieval. Inspected the grinder pump basin and found standing water with visible moisture throughout. Assessment indicates the golf ball likely passed through the trap and entered the pump crock where it may be buried beneath accumulated toilet paper and debris. Recommended pumping and cleaning out the grinder pit to locate and remove the golf ball and prevent potential damage to the grinder pump impeller.

Responded to main drain backup in basement. Upon arrival, located the main drain cleanout access point near vertical stack penetrating floor structure. Evidence of active drainage issues was visible with significant water staining and discoloration on concrete floor surrounding drain area. Assessed PVC drain line connection and black flexible drainage components for blockages and flow restrictions. Performed drain cleanout procedure to clear obstruction in main line. Verified proper drainage flow restored through system. Documented existing corrosion on metal flange at pipe penetration point and moisture damage to surrounding floor area for customer awareness.

Completed comprehensive heating maintenance visit on natural gas furnace system. Performed diagnostic testing of gas valve assembly with multimeter, confirming proper voltage reading of 57.5V during operational check. Inspected all internal mechanical and electrical components including inducer motor assembly, wiring harnesses, copper gas supply lines, and PVC venting system. All components found to be in normal working condition with proper connections and no visible signs of wear or damage. Verified airflow through ductwork and return air grille, confirming adequate system performance for continued reliable heating operation.

Completed installation of 20 KW Kohler whole home generator system including 200 amp automatic transfer switch with 20 feet of gas line and 20 feet of electrical conduit runs. Installed exterior disconnect box with metering equipment, established all necessary electrical connections, and verified proper operation of transfer switch and generator startup sequence.

Completed yearly air conditioning maintenance on three-year-old outdoor condensing unit. Inspected heat exchanger coils and found moderate accumulation of dirt, dust, and environmental debris on aluminum fins, particularly in middle and upper sections. Performed standard tune-up procedures including system performance evaluation and component inspection to ensure proper operation for upcoming cooling season.

Completed seasonal maintenance on AC system and humidifier as requested. Upon inspection, discovered severely corroded evaporator coil with significant rust damage and deterioration of the heat exchanger fins, indicating prolonged moisture exposure. Also observed substantial water pooling on basement floor around HVAC equipment base, suggesting active drainage issues or condensate line problems that likely contributed to the coil corrosion. Documented conditions with photos and advised customer of findings requiring immediate attention to prevent system failure.

Repaired leaking CPVC water line in basement ceiling at a 3/4" x 3/4" x 1/2" tee fitting with a 3/4" street 90 connection. Reconfigured the piping by installing a 90-degree elbow on the straight run, adding a tee fitting in the middle section, coupling back to the existing 3/4" pipe, and installing a street 90 to complete the final connection. All fittings were properly secured and tested for leaks to ensure system integrity.

Completed full HVAC system installation including 80% efficiency furnace, air conditioning unit, and complete ductwork system in attic space over multiple days. Installed new electrical disconnect with 30-amp Littelfuse fuses and proper conduit routing at outdoor condensing unit location, ensuring all components meet code requirements and manufacturer specifications for safe system operation.

Completed preventive maintenance cooling visit on 6-year-old air conditioning system for first-time service customer. Performed comprehensive inspection of air handler unit located in basement mechanical room, verified proper operation of all components including blower assembly and electrical connections. Inspected and documented Aprilaire humidifier installation, ductwork connections, and condensate drainage system to ensure all equipment functioning within manufacturer specifications.

Responded to water leak originating from basement floor tiles in a 23-year-old residential property. Upon arrival, accessed ceiling infrastructure to inspect exposed plumbing system, including PVC drain lines and vent pipes mounted to wooden support beams. Identified leak source in overhead plumbing connections, documented existing pipe configuration with vertical drain line and horizontal waste lines. Repaired faulty connection point, tested system for proper drainage and verified no additional moisture intrusion. Trip charge waived due to membership status.

Responded to a toilet leak at the base with visible discoloration on a 21-year-old condo unit. Upon inspection, identified failed wax ring seal as the source of water seepage around the toilet base. Removed and reset toilet with new wax ring and hardware to restore proper seal and prevent further water damage to flooring.

Completed scheduled preventative maintenance cooling visit on 5-year-old air conditioning system. Performed comprehensive system inspection including cleaning of heavily soiled blower wheel assembly which showed significant dust and debris accumulation on fan blades and internal components. Inspected evaporator coil and heat exchanger fins within air handler, verified proper airflow through ductwork, and documented system condition with photos. All components operational upon completion of maintenance service.

Performed comprehensive assessment of 60-year-old residential boiler system for replacement estimate. Unit shows significant age-related wear with deteriorated components, oxidized copper piping, and outdated safety mechanisms. Documented existing equipment configuration including expansion tank, pressure relief systems, and distribution piping to provide accurate replacement specifications and scope of work required for new installation.

Completed routine air conditioning maintenance on 6-year-old system located in basement utility area. Performed standard tune-up procedures including inspection of HVAC unit, ductwork, and associated components. Evaluated ductwork condition and discussed cleaning recommendations with customer. Customer declined membership program enrollment at this time.

Responded to report of natural gas odor detected near 3-year-old generator unit. Upon inspection, identified corroded gas line connections at the flex connector coupling point where the rigid pipe meets the flexible metal conduit supplying the generator. The threaded metal fittings showed significant rust deterioration and weathering from outdoor exposure, which compromised the integrity of the gas line connection. Documented the corroded components and deteriorated mounting hardware with photographic evidence showing the extent of rust damage on the vertical supply pipe, valve assembly, and coupling connections. The installation showed signs of prolonged moisture exposure with biological growth on surrounding surfaces, contributing to accelerated corrosion of the gas line components.

Diagnosed HVAC system with inoperative blower and discovered blown 30-amp fuses supplying power to the blower motor. Upon further inspection, identified heat damage to the electrical disconnect box, indicating excessive current draw or poor connections. Measured electrical current at 52 amps using clamp meter, confirming overload condition. Determined blower motor module failure as root cause of fuse failure and heat damage. Ordered replacement blower motor module under warranty coverage and new disconnect box as non-warranty repair. Coordinated parts delivery and scheduled follow-up installation after components arrived. Documented electrical measurements and heat damage with photographs for warranty claim and customer records.

Completed scheduled maintenance on 8-year-old York air conditioning system. Performed comprehensive inspection of outdoor condensing unit, verified proper operation of all electrical connections at junction box, and confirmed system functionality. Unit operating within normal parameters with no issues identified during routine preventative maintenance visit.

Completed scheduled preventive maintenance on residential air conditioning system. Inspected outdoor condensing unit, verified proper operation of all electrical components at breaker panel, and confirmed system functionality. Unit showed signs of vegetation encroachment which was noted for ongoing monitoring.