Your Trusted HVAC, Plumbing & Electrical Experts in Wadsworth, OH

Completed comprehensive AC tune-up including full system inspection and performance evaluation. Inspected control board wiring and connections, examined blower wheel assembly for proper operation and cleanliness, and verified all electrical components functioning within normal parameters. System operating efficiently with no immediate concerns identified.

Completed MVP cooling maintenance visit on residential HVAC system. Performed standard preventive maintenance inspection, accessed interior components through service panel, and verified proper operation of control systems and condensate drainage lines. Unit operating within normal parameters upon completion of service.

Completed installation of flexible insulated HVAC ductwork in attic space, routing and connecting all remaining duct runs to air handler unit. Installed flue pipe for proper combustion venting and performed system startup procedures, including operational testing and safety verification. Installed Kidde carbon monoxide alarm to ensure occupant safety and code compliance.

Responded to no hot water complaint on residential tank-style water heater. Upon arrival, confirmed unit was not heating and status indicator light was no longer flashing. Customer had already attempted to reset the system without success. Performed diagnostic inspection of the water heater, checking electrical connections, thermostat operation, and heating element functionality. Inspected unit labels and specifications to verify proper system requirements. Documented existing installation conditions including copper supply lines and standard basement utility room setup for service records.

Responded to service call for leaking bathtub faucet. Upon inspection, discovered significant corrosion and mineral buildup on internal drain assembly components, including deteriorated metal brackets and oxidized brass fittings with rust staining around the fixture opening. Assessed all visible plumbing fixtures including tub spout, shower diverter, and drain components to determine source of leak and extent of deterioration requiring repair.

Provided free estimate for tankless water heater system conversion. Evaluated existing Rheem standard tank water heater installation, documented current equipment specifications and utility connections, and assessed feasibility for tankless system upgrade.

Completed 200 amp electrical service upgrade in residential basement, installing new main circuit breaker panel mounted on plywood backing board with proper conduit entry from above. Installed dedicated circuit for tankless water heater system as part of the service upgrade. Added convenience duplex receptacle outlet below main panel for utility access, with all wiring properly secured and routed through conduit per code requirements.

Completed MVP cooling maintenance visit on residential HVAC system over 12 years old. Performed comprehensive inspection of outdoor condenser unit and indoor Lennox furnace system, documenting equipment condition through photographs. Condenser unit showed normal weathering consistent with age and outdoor exposure but remains operational on concrete pad with proper drainage and clearance from landscaping. Verified all mechanical components, refrigerant lines, and electrical connections at both outdoor and indoor units, confirming system functionality for continued cooling season operation.

Completed preventive maintenance on Payne brand air conditioning system. Inspected indoor furnace/air handler unit and outdoor disconnect box, verified all electrical connections secure, and confirmed system operational status. Equipment age could not be verified from available manufacturer labels during this maintenance visit.

Performed routine maintenance flush and fill service on a Bradford White Defender Safety System tanked water heater. Successfully drained sediment buildup from the tank, flushed the system to remove accumulated mineral deposits, and refilled the unit to restore optimal performance and extend equipment lifespan.

Completed installation of flush-mount light fixture in kitchen featuring decorative textured glass panel with rippled pattern and dark bronze circular frame. Verified proper electrical connections, tested switch operation, and ensured secure mounting to ceiling with all components functioning correctly.

Installed sink pump with complete drainage system including new PVC drain and vent lines routed through ceiling joists and wall cavities. Roughed in hot and cold water supply lines using copper piping, establishing proper connections to the pump assembly. All plumbing lines were secured and positioned in accordance with code requirements, with protective coverings maintained throughout the work area to prevent damage to surrounding surfaces.

Responded to customer complaint of black particles appearing in bathtub and toilet water. Performed complimentary water quality testing to identify the source of contamination. Conducted exterior inspection at foundation-level hose bib and collected water samples using pressure gauge and testing equipment at utility sink location to analyze water quality and determine appropriate treatment recommendations.

Performed video camera inspection of main drain line using digital inspection equipment. Camera feed revealed internal pipe conditions and potential blockage areas, with images captured and documented for assessment and quote preparation purposes.

Performed comprehensive electrical inspection of residential circuit breaker panel for prospective homeowner. Examined main panel installation, verified proper breaker configuration across both bus columns, and assessed all visible wiring connections including neutral bar terminations and branch circuit conductors. Documented panel condition with photographic evidence showing Square D breakers, bus bar assembly, and overall system integrity for buyer's evaluation prior to property purchase.

Conducted site assessment for installation of macerator/drain pump system for basement sink in single family residence with no existing waste pump infrastructure. Evaluated structural framing, existing plumbing lines, and electrical routing through floor joists to determine optimal installation location and connection points for new SaniFlo-type system. Documented existing PVC drain lines, copper water supply, and available access points through floor cavity for future pump discharge line integration.

Responded to service call regarding recently installed generator that was not properly leveled. Upon arrival, used precision leveling tools to assess the unit's current position and confirmed the generator was out of level. Adjusted and leveled the generator to manufacturer specifications, ensuring proper orientation for optimal operation and longevity of the equipment. Verified final levelness with torpedo level and documented the corrected installation with photographs for service records.

Responded to a floor drain obstruction caused by a golf ball that entered a 2" floor drain connected to a grinder pump crock. Attempted multiple methods to clear the obstruction, including running water from the water heater through the floor drain to flush the golf ball into the crock, but was unsuccessful in dislodging it. Used solder wire to probe the drain trap for obstructions with no detectable blockage found in the trap itself. Due to the small diameter of the drain line, camera inspection and mechanical snaking were not viable options for retrieval. Inspected the grinder pump basin and found standing water with visible moisture throughout. Assessment indicates the golf ball likely passed through the trap and entered the pump crock where it may be buried beneath accumulated toilet paper and debris. Recommended pumping and cleaning out the grinder pit to locate and remove the golf ball and prevent potential damage to the grinder pump impeller.

Responded to main drain backup in basement. Upon arrival, located the main drain cleanout access point near vertical stack penetrating floor structure. Evidence of active drainage issues was visible with significant water staining and discoloration on concrete floor surrounding drain area. Assessed PVC drain line connection and black flexible drainage components for blockages and flow restrictions. Performed drain cleanout procedure to clear obstruction in main line. Verified proper drainage flow restored through system. Documented existing corrosion on metal flange at pipe penetration point and moisture damage to surrounding floor area for customer awareness.

Completed comprehensive heating maintenance visit on natural gas furnace system. Performed diagnostic testing of gas valve assembly with multimeter, confirming proper voltage reading of 57.5V during operational check. Inspected all internal mechanical and electrical components including inducer motor assembly, wiring harnesses, copper gas supply lines, and PVC venting system. All components found to be in normal working condition with proper connections and no visible signs of wear or damage. Verified airflow through ductwork and return air grille, confirming adequate system performance for continued reliable heating operation.