North Canton’s Trusted Experts for HVAC, Plumbing & Electrical Services

Completed HVAC system estimate for replacement of existing furnace unit installed in October 2003, as indicated by handwritten notation on ductwork. Assessed beige/tan gas furnace with connected white PVC venting pipes and galvanized sheet metal supply ductwork in unfinished basement utility area. Documented current equipment configuration including manufacturer specifications, system age verification, and existing ductwork layout to provide replacement options excluding builder-grade equipment exceeding specified budget parameters.

Responded to non-functioning doorbell in 45-year-old residential property. Diagnosed and repaired doorbell system, which included troubleshooting the transformer, button mechanism, and chime unit mounted in the entryway. System restored to full operational status.

Completed MVP preventive maintenance service on residential air conditioning system. Performed comprehensive inspection of outdoor condenser unit, verifying proper fan operation, checking electrical connections, and inspecting capacitor and control board functionality. All components found operating within normal parameters, with fuses, wiring, and electrical systems in good condition.

Responded to service call for 7-year-old tanked water heater with pilot light ignition failure located in basement. Upon arrival, performed diagnostic inspection of gas control valve, thermocouple, and pilot assembly. Found thermocouple had failed, preventing proper flame detection and causing pilot safety lockout. Replaced faulty thermocouple with OEM-spec component, cleaned pilot orifice of accumulated debris, and verified proper gas flow to pilot assembly. Re-lit pilot light, confirmed stable flame with adequate blue color and proper flame envelope around thermocouple tip. Tested main burner ignition sequence and verified normal operation through complete heating cycle. Inspected water heater for additional issues, noting minor corrosion at base and age-related wear consistent with unit's service life. All safety controls functioning properly upon completion. Unit restored to full operational status.

Completed MVP Cooling Visit recurring maintenance service on residential HVAC system. Performed comprehensive inspection of internal components including blower assembly, electrical connections, gas valve, control boards, and condensate drainage system. Inspected squirrel cage blower wheel and found it in good operational condition with minimal dust accumulation and no debris buildup between blades. Verified proper function of motor assembly, wiring harnesses, and all mechanical components. All systems operating within normal parameters with no issues identified requiring immediate attention.

Responded to no cooling complaint on 15+ year old residential air conditioning system. Upon arrival, performed diagnostic assessment of Coleman/Bryant condenser unit and associated components. Inspected outdoor unit positioned on concrete pad, verified proper electrical connections, examined refrigerant line sets, and checked PVC condensate drainage system. Identified issue preventing cold air production and completed necessary repairs to restore system operation. Customer enrolled in maintenance program with service charge waived as membership benefit. Unit tested and verified cooling functionality upon completion.

Performed scheduled maintenance tune-up on a white Generac residential standby generator approximately 5 years old. Conducted comprehensive inspection of engine components, control panel, and external housing with all systems operating within normal parameters upon completion.

Installed dedicated electrical circuit for Navien tankless water heater unit in basement mechanical room. Ran metal conduit from main electrical panel to junction box mounted on concrete block wall, providing proper power supply for unit operation. Completed all wiring connections in accordance with manufacturer specifications and local electrical codes to ensure safe and reliable operation of the tankless water heating system.

Successfully installed a new Energy Star-rated tankless water heater unit on a concrete block wall within a wooden frame backing structure. The installation included all necessary connections: PVC venting routed through the top of the unit, copper water supply lines along the left side and bottom, gas line connections, and a condensate pump with electrical connections at the base of the unit. All components were properly secured, piping was organized and routed efficiently, and the system was tested to ensure proper operation and code compliance.

Responded to service call to repair two leaks in water supply lines servicing a fireplace. Located and accessed the affected piping in the attic/ceiling space where galvanized and copper supply lines run through the wooden framing. Successfully repaired both leaks using truck stock materials, securing pipes with appropriate clamps and brackets to the structural framing members. Tested the system to confirm all leaks were eliminated and proper water flow was restored to the fireplace supply lines.

Responded to service call for leaking stack at base. Upon inspection, discovered compromised seal at floor drain connection where main stack meets basement floor. Removed deteriorated drain covers and assessed PVC stack assembly. Identified moisture damage in overhead framing and staining on ceiling materials from previous leak exposure. Documented existing plumbing configuration including vertical stack, multiple branch connections with hose clamps, and floor drain fitting with brass threading. Photographed conditions for repair assessment and customer records.

Conducted on-site assessment for air conditioning installation estimate at property with no existing AC system. Evaluated 25-year-old existing furnace for potential replacement, documenting current equipment condition through detailed photography of internal components including gas valve, ignition system, blower assembly, and associated wiring. Observed significant condensation accumulation on main trunk ductwork, indicating potential insulation deficiency that would need to be addressed during AC installation to prevent efficiency loss and moisture issues. Provided comprehensive replacement options for both cooling system addition and furnace upgrade to modernize complete HVAC system.

Performed complete flush and fill maintenance service on wall-mounted tankless water heater unit. Removed and cleaned inlet filter screen which showed significant sediment accumulation and debris buildup. Flushed heat exchanger assembly and internal copper piping system to remove mineral deposits and restore optimal flow rates, then refilled unit and verified proper operation of all components including gas valve assembly and control module.

Responded to emergency call for 8-year-old water heater with water leakage that had flooded the floor overnight. Upon arrival, inspected the tanked water heater unit and surrounding plumbing connections, documented the equipment condition and leak source with photographs. Assessed the copper piping, fittings, and water heater cabinet for failure points to determine the cause of the flooding and non-operational status of the unit.

Responded to service call for sump pump backup issues. Upon inspection, found sump pump experiencing recurring drainage problems despite previous flushing attempts. Evaluated sump pump assembly, discharge piping, and check valve system for blockages or mechanical failure. Assessed condition of existing pump motor and float switch operation. Photographed installation showing sump basin, electrical connections, copper and PVC discharge lines, and associated plumbing infrastructure in basement utility area. Discussed diagnostic findings with customer and provided recommendations for either snaking the discharge line to clear potential obstruction or replacing the sump pump unit depending on severity of blockage and pump condition.

Completed MVP air conditioning maintenance on residential outdoor condenser unit. Performed comprehensive system inspection, cleaned condenser coils and grilles, checked refrigerant levels, tested electrical connections and disconnect box, verified proper airflow through louvers, and confirmed unit operation. System is functioning within normal parameters with no issues identified.

Responded to plumbing service call for multiple outdoor spigot issues. Addressed malfunctioning garage spigot that would not shut off properly, requiring valve inspection and repair. Evaluated capped-off spigot located behind the condo unit that was non-operational. Assessed two additional outside spigots for proper function. Documented conditions of all fixtures with photographs showing brass valve components, mounting locations on exterior siding, and surrounding areas including foundation landscaping.

Performed routine flush and maintenance service on gas-fired tankless water heater unit. Removed front access panel to expose internal components, heat exchanger, and control systems. Isolated water supply using existing shut-off valves on inlet and outlet lines, then connected flushing equipment to service ports. Circulated descaling solution through heat exchanger to remove mineral deposits and scale buildup. Inspected gas supply line connections, yellow-handled shut-off valves, and flexible gas line for proper operation and potential leaks. Examined corroded brass fittings and shut-off valves showing significant oxidation, mineral deposits, and green patina buildup, indicating age-related deterioration and moisture exposure. Checked PEX water supply lines, exhaust venting system with PVC piping, burner assembly, copper tubing connections, and electrical wiring harnesses for proper condition. Verified control board operation and all internal components functioning correctly. Flushed

Responded to main drain backup causing significant water accumulation throughout basement area. Successfully cleared main drain line obstruction, restoring proper drainage flow and preventing further flooding. Documented pre-existing water damage to concrete floor and recommended monitoring for additional drainage issues.

Completed installation of comprehensive indoor air quality system including Aprilaire steam humidifier, Aprilaire 5000 air cleaner, and Air Scrubber with ActivePure technology. All units mounted to existing HVAC ductwork, wired to electrical supply, and tested for proper operation. System commissioned and verified functional.