Trusted HVAC, Plumbing & Electrical Services in Canton, OH

Completed installation of 80% AFUE gas furnace and air conditioning system. Installed new outdoor condensing unit with proper refrigerant line connections utilizing brass service valves with foam insulation for temperature control and condensation prevention. Mounted line set securely to exterior wall using metal bracket assembly. Verified proper electrical connections and replaced 20-amp fuses in disconnect box to ensure safe operation of new equipment. All refrigerant lines properly insulated and secured, system tested and operational.

Responded to service call for leaking water heater over 10 years old. Upon inspection, confirmed active leak from aging tank-style natural gas water heater installed in basement utility room. Unit showed signs of deterioration consistent with age, including corrosion at connection points and compromised tank integrity. Due to age of equipment and extent of leak, recommended full replacement rather than repair. Documented existing installation with photos showing flexible supply lines, gas connections, venting configuration, and overall condition of mechanical space for replacement planning purposes.

Performed routine maintenance on a 5-year-old tankless water heater unit, completing a comprehensive deliming flush service. Technicians descaled the heat exchanger and internal components to remove mineral buildup, ensuring optimal performance and energy efficiency of the Energy Star certified unit.

Performed annual maintenance inspection on a one-year-old Navien tankless water heater installed in basement utility area. Confirmed unit operational status, verified proper venting and gas line connections, and inspected all water supply lines for leaks or deterioration. Note: Service order indicated tanked water heater flush, but unit on-site is a tankless model which does not require traditional tank flushing procedures.

Completed 100-ampere electrical service upgrade including installation of new main breaker panel with proper circuit identification and labeling. Updated grounding system to meet current code requirements and installed exterior disconnect switch in compliance with 2023 National Electrical Code Article 230.85. All conductors properly terminated, panel mounted on plywood backing in utility space, and multiple branch circuits organized with appropriate overcurrent protection devices.

Replaced all three mini-split linesets on the system. Performed pump down procedure to recover existing refrigerant, then weighed in fresh R-410A charge to manufacturer specifications. System tested and verified operational upon completion.

Conducted on-site assessment for central air conditioning installation on a small residential property. Evaluated existing HVAC infrastructure, including current furnace/air handler unit in basement mechanical room, and assessed exterior wall mounting location near electrical service panel for potential condenser placement. Documented equipment specifications and site conditions with photos to prepare comprehensive system replacement estimate.

# Whole-House Drain Backup Resolution Responded to a whole-house drain backup in a 1962-built residence. Upon arrival, conducted comprehensive assessment of the plumbing system to identify the source of the backup affecting all fixtures. Inspected basement floor drain area, which showed evidence of water seepage and historical drainage issues based on concrete staining patterns around the drain cover. Evaluated the home's water treatment system configuration, including the well pressure tank and water softener/filtration equipment located in the basement utility area. Verified that the backup was related to the main drainage system rather than the water supply or treatment components. Cleared the main sewer line obstruction using appropriate drain cleaning equipment. The blockage was consistent with aging cast iron or clay pipe typical of homes from this era, where buildup and deterioration can cause recurring drainage problems. Restored proper flow throughout the entire household

Completed recurring salt delivery service for dual-tank water softener system. Delivered and replenished water softener salt pellets from warehouse inventory to basement utility area, filling the designated salt storage container adjacent to the water treatment equipment. System confirmed operational with both softener tanks displaying proper digital readouts and all plumbing connections secure with no visible leaks or issues.

Completed preventative maintenance inspection on residential air conditioning system for MVP customer. Verified system temperatures using digital thermometer, recording supply air temperature of 45.0°F at the evaporator coil, which indicates proper cooling performance. Inspected internal electrical components, wiring harnesses, and control board for proper connections and operation; all components found to be functioning within normal parameters with no immediate service needs identified.

Responded to a stoppage issue on a newly installed toilet in a 1953-era residential property. Successfully cleared the obstruction and restored proper drainage and flushing function to the fixture.

Completed relocation of outdoor condensing unit from original position to side of home. Coordinated electrical work prior to unit relocation, ordered and received necessary parts, then relocated unit to new concrete pad with proper stone base and reconnected all refrigerant lines, electrical connections, and condensate drainage to ensure proper system operation.

Disconnected electrical service to existing hot tub in preparation for replacement. Safely de-energized the dedicated 240V circuit at the exterior-mounted disconnect box, removed hot tub from power supply while maintaining all existing conduit runs and electrical infrastructure for future reconnection of new unit.

Responded to service call for bathtub drainage and shower leak issues. Upon inspection, identified faulty tub stopper assembly causing water leakage during bathing, water infiltration into electrical panel access behind shower wall during shower use, and malfunctioning overflow drain requiring sealing. Assessed bathtub drain mechanism with chrome cover and stopper, examined tile surround and spout installation, and inspected accessible plumbing infrastructure including copper supply lines and PVC drainage system showing age-related corrosion. Documented existing conditions of fixtures, drainage components, and compromised areas where water penetration was occurring near electrical panel access point.

Completed comprehensive AC tune-up on 4-year-old Lennox system per seasonal maintenance special. Performed full system inspection including indoor air handler unit and outdoor condensing unit, verified all electrical connections, checked refrigerant levels and pressures, cleaned condenser coils, inspected ductwork connections, and tested thermostat operation. All components found operating within normal parameters with no deficiencies noted.

Completed routine backflow prevention device testing at a 160-year-old single-family residence. Inspected and tested the backflow preventer assembly located in the basement utility area near the Neptune water meter. Device showed proper operation with no cross-connection issues detected. Verified that the backflow assembly maintained appropriate pressure differential and check valves sealed correctly during testing procedures. Documented existing conditions of aging plumbing infrastructure, including copper piping with mineral deposits and corrosion typical of historic residential systems. All components passed testing requirements and system remains compliant with current plumbing codes.

Responded to complaint regarding recently installed kitchen faucet delivering only scalding hot water in 40-year-old home. Verified water heater temperature was properly set at 120°F using infrared thermometer at multiple fixtures. Confirmed issue was isolated to the new kitchen faucet installation, with other plumbing fixtures delivering appropriately tempered water. Documented temperature readings and conditions for potential warranty claim or callback resolution.

Completed standard air conditioning tune-up maintenance on outdoor condensing unit. Visual inspection revealed condenser coil showing moderate dirt accumulation and weathering consistent with normal outdoor exposure, with all fins intact and functional. Unit operational, and complimentary carbon monoxide detector provided to customer.

Replaced failed 2018 Rheem 40-gallon short water heater with new Bradford White 40-gallon short unit featuring 6-year manufacturer warranty. Installation included thermal expansion tank, updated gas line shut-off valve, and new drain pan with discharge line routed to existing sump crock alongside furnace condensation drain. All plumbing connections completed with proper copper piping, pressure relief components, and code-compliant fittings. System tested and operational upon completion.

Completed recurring AC maintenance on residential cooling system. Performed comprehensive inspection of outdoor condenser unit, including cleaning of mesh screening panels, verification of fan operation through protective grille, and assessment of unit positioning on concrete pad. Inspected indoor mechanical components including condensate pump with operational indicator lights, PVC drain lines, flexible refrigerant lines, and associated plumbing connections in basement utility area. All components found operating within normal parameters with no immediate service needs identified.