HVAC, Plumber & Electrician Services in Fairlawn, OH

Completed MVP recurring cooling maintenance visit on HVAC system. Performed thorough inspection of blower assembly and electrical components, including examination of squirrel cage blower wheel which showed normal operational wear with minor surface patina on galvanized steel blades. Inspected control panel components including capacitor, contactor relay, and all associated wiring connections across multiple circuits. All electrical connections found secure with proper wire routing and strain relief. System operational and functioning within normal parameters.

Responded to service call for running toilet and dripping faucet in two separate bathrooms. Inspected toilet fill valve assembly and flapper mechanism to diagnose continuous running issue. Examined faucet cartridge and supply line connections at vanity sink with turquoise marbled countertop to identify source of drip. Evaluated water supply plumbing including flex lines, shut-off valves, and copper piping. Provided customer with repair recommendations and options for both fixtures to restore proper operation and eliminate water waste.

Completed preventive maintenance tune-up on 21-year-old Carrier air conditioning system. Performed comprehensive inspection of indoor furnace unit, electrical components including contactor and capacitor, verified all electrical connections secure, and assessed overall system operation. All components found to be in functional condition with normal wear consistent with equipment age.

Responded to service call regarding separated conduit connection at primary electrical meter. Upon arrival, confirmed that utility company required licensed electrician to address the meter conduit separation before reconnecting service. Inspected dual electrical panel installation in recessed wall cavity and verified all circuit breaker connections and panel integrity. Documented existing conditions showing panels properly mounted with exposed insulation in surrounding wall opening, indicating active renovation work. All circuit breakers tested and confirmed operational in both panel boxes.

Completed routine MVP cooling maintenance on 4-year-old system. Inspected control board including DIP switch settings and outdoor discharge air sensor connections, verifying all electronic components functioning properly. Examined dual run capacitor rated at 45+5 MFD, confirmed proper ratings and secure mounting. All components operating within normal parameters with no deficiencies noted.

Responded to warranty callback for noise concern on recently installed HVAC system. Inspected outdoor condensing unit installation, verified proper placement on paver patio surface, and confirmed unit operation. Documented equipment condition and installation positioning with photos for warranty records.

Completed MVP recurring cooling maintenance visit on residential HVAC system. Performed comprehensive inspection of outdoor condensing unit and electrical control components, including capacitor, contactor, and associated wiring connections. All system components found operating within normal parameters, and unit tested successfully upon completion of maintenance procedures.

Completed comprehensive MVP AC maintenance on residential HVAC system. Performed thorough inspection of furnace unit, including blower motor assembly, gas line connections, and electrical wiring harnesses. Observed existing copper piping with surface oxidation and patina buildup in mechanical room. Verified proper operation of all system components, checked connections and fittings, and documented equipment condition through photographic records. All components found to be functioning within normal operational parameters.

Performed routine maintenance flush on a 2-year-old 50-gallon Bradford White tank-type water heater to remove sediment buildup and maintain optimal efficiency. Successfully drained and flushed the unit, confirmed proper operation of all connections including copper supply lines with brass fittings and red-handled shutoff valve, and verified the galvanized flue pipe venting system was properly secured.

Completed routine MVP cooling maintenance visit on outdoor condensing unit. Accessed electrical compartment and inspected dual capacitor assembly, wiring connections, and internal components for proper operation and signs of wear. All electrical connections verified secure and system found operating within normal parameters.

Completed MVP cooling maintenance visit on residential HVAC system. Performed standard preventive maintenance inspection of outdoor condensing unit, verified electrical connections at disconnect box, and checked refrigerant lines and condensate drainage system. Inspected Aprilaire whole-home humidifier integrated with ductwork system to ensure proper operation and readiness for upcoming season.

Installed customer-supplied kitchen faucet fixture on double-basin stainless steel sink. Connected braided flexible supply lines to existing copper water supply pipes and verified proper water flow and drainage with no leaks detected upon completion.

Completed new sump pump installation in forty-year-old residential property. Installed discharge piping system utilizing Schedule 40 PVC-DWV cellular core pipe with proper fittings and connections to existing plumbing infrastructure. Secured all piping with metal clamps and mounting hardware against basement foundation walls. Connected electrical wiring with appropriate wire nuts and ensured proper grounding for pump operation. System tested and verified for proper discharge flow and operational functionality.

Completed MVP recurring heating maintenance visit. Inspected and serviced HVAC system including attic-mounted air handler unit with associated PVC condensate lines and refrigerant connections, as well as basement-installed Aprilaire humidification system. All equipment operating within normal parameters; no issues identified during inspection.

Responded to callback for leaking toilet following previous repair work. Upon arrival, inspected toilet installation and identified failed water supply line connection. Removed defective braided stainless steel supply line and replaced with new flexible connector, ensuring proper thread seal and connection integrity at both shut-off valve and toilet tank inlet. Tested system under full water pressure and confirmed leak was eliminated with no additional drips or seepage detected.

Responded to customer report of water leak following recent maintenance visit. Upon inspection, identified leak originating from humidifier water supply line connection. Replaced faulty angle stop valve and brass compression fitting that had developed seepage. Verified all connections secure, tested system operation, and confirmed no further leakage from HVAC unit or associated plumbing components.

Completed routine maintenance on five-year-old Lennox air conditioning system and furnace. Inspected outdoor condenser unit, verified electrical connections and capacitor operation, cleaned accumulated debris from control panel and concrete pad, and confirmed proper refrigerant line insulation and secure mounting. All systems tested and operating within normal parameters.

Responded to service call for non-functional ceiling fan light fixture in bedroom and inoperative light fixture near front/side door entry. Diagnosed and repaired both lighting circuits, restoring full functionality to the bedroom ceiling fan's integrated light fixture and the exterior entry light. Verified proper operation of all repaired fixtures upon completion.

Completed cooling maintenance inspection of residential HVAC system. Inspected air handler unit, ductwork, and air filtration system in mechanical room. Verified air filter condition and confirmed proper airflow through diamond-pattern mesh filter element. System operating within normal parameters.

Replaced deteriorating galvanized drain piping and cast iron Durham elbows in basement with new PVC pipe and fittings. Cut into existing vent pipe and adapted to new drainage configuration. Rebuilt and reconfigured kitchen sink drain system in cabinet with new pipe, fittings, and installed air admittance valve. Replaced outdated garbage disposal with new InSinkerator 3/4 HP unit featuring quiet technology. Installed new basket strainer and tubular fittings to connect double bowl sink configuration. Snaked drain line in basement to ensure proper flow and eliminate backup issue.