Trusted HVAC, Plumbing & Electrical Services in Medina, OH

Completed MVP cooling maintenance visit on two HVAC units. Inspected indoor air handler and found heavily soiled accordion-style air filters with significant dust and dirt accumulation requiring replacement. Serviced outdoor condensing unit, which displayed weathered coils with brownish discoloration from environmental exposure. Performed standard maintenance procedures including filter replacement, coil inspection, and system evaluation to ensure proper operation of both units.

Completed annual preventive maintenance on standby generator system. Inspected and replaced air filter element, performed battery load test showing 8.75A standard reading with acceptable CCA values, and verified all critical operating parameters within manufacturer specifications.

Completed MVP cooling maintenance visit on 4-year-old system. Performed comprehensive inspection of outdoor condensing unit, noting weathering and dirt accumulation on exterior panels and grilles consistent with normal outdoor exposure. Verified temperature readings at indoor air handler in attic space, measuring 70.7°F supply air temperature. Confirmed unit operational with proper airflow through condenser coils despite surface debris. System functioning within normal parameters for routine preventive maintenance service.

Completed installation of new air conditioning system with outdoor condenser unit and evaporator coil. Installed 50-amp Bussmann FLNR time-delay fuses in exterior disconnect box, positioned condenser unit on concrete pad with proper clearances, connected refrigerant lines through building foundation, and performed system startup with manifold gauge set to verify proper refrigerant charge and operating pressures.

Diagnosed and replaced failed underground electrical line between first and second posts. Installed temporary line to verify integrity of circuit from second to third post. Excavated 46-foot trench at 18-inch depth for new permanent line installation, with subcontractor responsible for dig and backfill operations but not final grading.

Completed site assessment for aging residential air conditioning system experiencing refrigerant leak and no cooling condition. Evaluated existing outdoor condenser unit with deteriorated components and confirmed system replacement recommendation. Documented equipment location, electrical disconnect configuration, and refrigerant line routing for replacement installation planning.

Replaced existing kitchen sink and faucet assembly per customer request. Removed double-basin stainless steel sink with chrome dual-handle faucet and side sprayer, then installed new single-bowl black sink with corresponding fixtures. Completed all necessary plumbing connections under cabinet, ensured proper drainage function, and verified no leaks in water supply lines or drain assembly.

Responded to service call for non-operational air conditioning system on aging 15-year-old outdoor condensing unit. Performed diagnostic evaluation using manifold gauge set with charging hoses to assess refrigerant pressures and system performance. Conducted thorough inspection of internal components including compressor operation, refrigerant lines, and electrical connections to identify failure points and determine whether repair or replacement would be most appropriate given the unit's age and condition.

Completed first-time air conditioning system installation including outdoor condensing unit and evaporator coil. Installed and connected refrigerant lines with proper insulation, mounted service valves with Schrader ports for future maintenance access, and wired electrical components including 30-amp fuses and contactor. System was properly positioned on gravel pad, all copper lines were secured and insulated to prevent heat transfer, and unit was tested to ensure proper operation.

Completed installation of Navien NPE-240 tankless water heater with wall mounting, including expansion tank and isolation valves for proper system protection and serviceability. Installed fresh air intake and exhaust venting to exterior per manufacturer specifications. Reworked existing gas line to accommodate new unit requirements and ensure proper fuel delivery. Replaced three existing hose bibs throughout the residence with new frost-free sillcocks to prevent freeze damage and improve exterior water access. All copper piping connections completed with proper support brackets and fittings. System tested and verified operational with all safety controls functioning correctly.

Responded to emergency call for gas water heater failure with active leaking that began over the weekend. Upon arrival, confirmed existing 48-gallon Bradford White natural gas water heater had sustained major leak, with water and gas supply already shut off by customer. Conducted assessment of failed unit and surrounding plumbing infrastructure, including copper supply lines and PVC drain-waste-vent system. Documented existing installation specifications showing 40,000 BTU/hr input rating unit. Provided estimate for complete water heater replacement with same-day installation capability to restore hot water service.

Responded to service call for non-operational outdoor condenser unit on 0-year-old Lennox WT 01-2036 central air conditioning system. Upon arrival, performed diagnostic assessment of outdoor unit positioned on concrete pad adjacent to building. Inspected cylindrical condenser unit with gray-green exterior casing and horizontal louvered vents, confirming unit was not running. Checked electrical connections including black conduit running to building, tested capacitor and contactor functionality, and verified proper voltage supply. Identified failed component preventing compressor operation, completed necessary repairs to restore unit to operational status. Unit tested successfully with proper airflow through circular fan grille and normal operational sounds confirmed. System returned to service with condenser running efficiently.

Responded to no cooling call on 7-year-old Lennox air conditioning system affecting entire residence. Upon arrival, inspected outdoor condensing unit located on deck adjacent to home. Unit appeared to be in serviceable condition with electrical disconnect and conduit properly installed. Performed diagnostic evaluation to determine cause of cooling failure and restored system to normal operation under active maintenance plan coverage.

Responded to water leak emergency involving black pipe in attic/crawl space area. Upon arrival, located active leak creating significant water accumulation on floor. Inspected overhead plumbing system including black drainage pipes, copper water supply lines, and HVAC ductwork in confined space between joists. Documented conditions with photos showing pipe configuration and leak source area. Addressed leak issue and verified proper operation of affected plumbing components.

Completed on-site evaluation and provided estimate for complete HVAC system replacement including air conditioning unit and furnace in residential basement installation. Existing air conditioning system, approximately 25 years old, experiencing electrical issues with unit repeatedly tripping breaker circuit. Current furnace age undetermined but recommended for replacement as part of complete system upgrade. Assessment included existing Concord furnace with dual white PVC venting system, associated ductwork, and plumbing connections. Quoted high-efficiency replacement equipment to address electrical failures and improve system performance and energy efficiency.

Completed annual backflow prevention device testing on irrigation system backflow assembly located at building exterior. Unit tested and certified in compliance with local water authority regulations, with all check valves and test cocks functioning properly within acceptable parameters.

Underground service wire repair completed after damage caused by third-party fiber optic installation. Excavated area near exterior utility box to locate and access broken conductor, performed underground splice using approved materials and methods to restore electrical service. Backfilled excavation and restored yard area upon completion.

Responded to urgent no heat or air call and diagnosed failed heat pump defrost control board. Ordered replacement defrost board for shop delivery and returned upon parts arrival to complete installation. Removed faulty defrost control board from outdoor unit electrical compartment, installed new board, reconnected all wiring to proper terminals, and verified system operation. Unit restored to normal heating and cooling function with defrost cycle operating correctly.

Conducted on-site electrical assessment for whole-house generator installation at residential property. Evaluated existing electrical infrastructure in basement utility area, documenting current panel location, available conduit pathways, and clearance requirements for transfer switch installation. Inspected exterior mounting location adjacent to gas meter on brick foundation wall, confirmed adequate clearances from structure and utilities, and verified accessibility for fuel line connection and service access. Photographed proposed generator pad location, existing electrical service entry point, and basement routing options for load center interconnection to provide comprehensive documentation for permit application and installation planning.

Completed tankless water heater flush and descaling service on Rinnai unit to maintain optimal performance and efficiency. Repaired defective hot water shut-off valve under kitchen sink, restoring proper water control functionality to the fixture.