Trusted HVAC, Plumbing & Electrical Services in Medina, OH

Responded to clogged bathroom sink in residential property. Upon arrival, assessed the undermount sink with bronze widespread faucet and dark wood vanity cabinet. Accessed the P-trap assembly beneath the sink and identified blockage in the drain line. Removed and disassembled the white PVC P-trap configuration, clearing accumulated debris and buildup causing the obstruction. Inspected flexible corrugated section and rigid plastic pipe segments for additional blockages. Cleaned all drain components thoroughly and reassembled the P-trap with proper slip-joint fittings to ensure watertight connections. Tested drain flow and verified proper drainage with no leaks detected at connection points. Left work area clean and plumbing system fully operational.

# Garbage Disposal Follow-Up Inspection Responded to a callback regarding a previously installed InSinkErator garbage disposal unit where the customer reported peeling paint around the drain area. Upon inspection, verified the disposal unit is properly installed and functioning correctly with all mounting components secure. Documented the current condition of the installation with photographs showing the disposal drain opening, splash guard, and surrounding sink basin area. The unit displays normal operational characteristics with no mechanical issues identified.

Completed comprehensive preventative maintenance on residential central air conditioning system. Performed standard AC tune-up procedures including inspection of condenser unit, verification of refrigerant levels, electrical connections check, and system operational testing. Exterior condenser unit showed moderate dust and debris accumulation on intake screen, which was cleaned to restore optimal airflow. Inspected condensate drainage system including PVC discharge lines and flexible drain hose for proper function and clearance. All components found operating within normal parameters with no deficiencies noted. System confirmed functioning properly with no repairs required.

Completed MVP heating maintenance visit on residential HVAC system. Performed diagnostic testing of electrical components using digital multimeter, recording voltage readings of 33.5V within the control compartment. Inspected and tested temperature sensor assembly, examining the probe element and mounting bracket for proper operation and secure installation.

Responded to no cooling call with E201 error code displayed on 2-year-old system. Upon arrival, confirmed outdoor unit running but no airflow throughout home. Customer reported lines had frozen while away and had already defrosted unit, replaced filters, and reset breakers without resolution. Accessed indoor air handler and inspected blower assembly and control board. E201 error code indicated blower motor failure or communication fault. Performed diagnostic testing on blower motor and found motor had failed, preventing air circulation through system. Verified all electrical connections to motor and control board were secure. Checked capacitor and confirmed outdoor unit components functioning properly, but lack of indoor airflow had caused evaporator coil to freeze initially. Removed failed blower motor assembly from air handler cabinet. Installed new replacement blower motor with proper specifications for unit. Reconnected all wiring harnesses to motor and control board terminals. C

Responded to service call for estimate on installation of two local shut-off valves and repair of leaking pipe. Upon arrival, assessed existing plumbing configuration beneath kitchen sink, which consisted of copper supply lines with brass fittings mounted to wall. Inspected flexible braided stainless steel supply hoses connecting to fixture above. Identified areas requiring shut-off valve installation to provide localized water control for future maintenance and emergency situations. Examined leaking pipe connection points and compression fittings for signs of corrosion, wear, or improper sealing. Documented current plumbing setup with photographs showing copper pipe condition, mounting brackets, and supply line routing. Provided detailed estimate for installation of two quarter-turn angle stop valves on hot and cold water supply lines, along with repair work needed to address active leak. Explained benefits of adding local shut-off capability to minimize water damage risk during futur

Completed full system tune-up on 7-year-old air conditioning system. Performed comprehensive inspection of outdoor condensing unit, replaced furnace filter, and verified all components operating within manufacturer specifications. Unit shows normal wear consistent with age, with exterior panels displaying surface deterioration but no impact on system performance or efficiency.

Completed electrical estimate for propane-fueled generator installation at residential property. Inspected existing electrical panel and interior wiring connections, documenting current service configuration including bus bar terminals, circuit protection devices, and conduit entry points. Assessed outdoor generator placement location near landscaped area with consideration for required clearances from structures and property boundaries. Evaluated electrical infrastructure for proper generator integration, transfer switch requirements, and necessary upgrades to accommodate backup power system.

Responded to service call for non-functional outside outlet. Upon arrival, diagnosed electrical issue affecting outdoor receptacle and decorative lamp post fixture. Completed necessary repairs to restore power to the outdoor electrical system, verified proper operation of both the outlet and ornamental lamp post lighting fixture.

Returned to site to complete comprehensive leak search on mini-split system during optimal dry morning conditions. Connected digital manifold gauges to outdoor condensing unit and conducted extensive five-hour diagnostic testing to isolate refrigerant leak location, utilizing electronic leak detection methods and pressure testing protocols to identify system integrity issues.

Completed full HVAC system installation including new air handler, heat pump, and humidifier in basement utility area. Reconnected supply trunk ductwork under stairs, installed all necessary metal ductwork transitions and flexible duct connections, and established proper ventilation pathways. All equipment positioned on concrete floor with secure connections to existing infrastructure, system tested and operational upon completion.

Installed dedicated 90-amp maximum circuit for air handler unit and separate dedicated circuit for heat pump system in accordance with electrical code requirements. Completed all necessary wiring connections at main electrical panel, verified proper breaker sizing and load calculations, and ensured both HVAC circuits are properly isolated for safe, reliable operation.

Responded to service call for residential tanked water heater displaying error code and failing to heat water. Upon arrival, performed diagnostic assessment of the unit and associated components. Inspected electrical connections, control box, and thermostat assembly mounted on the tank exterior. Verified proper power supply to the unit and tested heating element functionality. Cleared error code from the control system and reset the temperature controls to manufacturer specifications. Checked all copper piping connections, pressure relief valve, and circulation pump assembly for proper operation. Confirmed the heating elements were cycling correctly and water temperature was rising to setpoint. Verified all safety labels and warning indicators were visible and intact on the unit. System returned to full operational status with proper heating performance restored.

Completed MVP recurring cooling maintenance visit on residential HVAC system over 14 years old. Performed standard inspection of furnace/air handler unit, confirmed proper operation of all components, and documented equipment condition with photos showing existing foam sealant at panel seams and supply lines. All systems operating within normal parameters.

Completed dryer vent cleaning service for non-MVP customer. Thoroughly cleaned the dryer vent system from the appliance connection point through the exterior termination, removing accumulated lint, debris, and dust buildup. Documented pre-existing conditions showing discoloration and residue accumulation around drain pan and vent pipe interior, with visible staining indicating previous moisture exposure or condensate issues in the HVAC system components.

Completed installation of Navien tankless water heater system with all required components and accessories. Installed water supply lines with brass fittings, hot and cold shut-off valves, and proper venting through exterior wall using PVC exhaust termination. All plumbing connections were secured, tested for leaks, and system was commissioned to ensure proper operation and performance.

Replaced existing Rinnai tankless water heater with new Navien NPE-240 model. Installation included new service valves on hot and cold water lines, copper piping connections with brass fittings, and replacement of exhaust venting system with new PVC pipe and elbows routed through exterior wall. Unit mounted on wooden backing board in utility area, programmed to 125°F, and tested for proper operation.

Responded to service call for standby generator that failed to start automatically during power outages, requiring manual restart at transfer switch on three separate occasions. Diagnosed issue as generator control being set to "Off" position instead of "Auto" mode. Inspected internal electrical components including solenoid assembly, wiring connections, and control circuits; reset generator to automatic operation mode and verified proper transfer switch communication to restore automatic standby functionality.

Completed electrical estimate for whole-house generator installation at residential property with existing natural gas service and no HOA restrictions. Assessed existing electrical panel configuration, available capacity, and optimal transfer switch placement in basement utility area. Documented current electrical infrastructure including main service panel, distribution system, and proposed installation location for automatic transfer switch and generator connection.

Responded to service call for 15-year-old central air conditioning system running continuously without adequate cooling. Diagnosed low refrigerant levels and identified evidence of refrigerant leak on suction line based on oily residue and lack of proper temperature differential. Initial refrigerant supply depleted during service; second appointment scheduled to complete refrigerant recharge and verify system operation.