Trusted HVAC, Electrical & Plumbing Services in Streetsboro, OH

Completed installation of new Lennox dual-fuel HVAC system consisting of an oil furnace and heat pump. System includes proper condensate drainage with PVC piping and trap assembly. Unit was mounted on a stable black pad with appropriate clearances, and all refrigerant lines and electrical connections were professionally secured to the exterior of the home.

Performed scheduled maintenance on gas furnace as part of recurring MVP Heating service. Inspected gas line and verified proper positioning of shutoff valve. Conducted electrical diagnostic testing with clamp meter, measuring current draw (0.18A) and voltage (49.3V) across motor components and control board to ensure system is operating within manufacturer specifications.

Performed evaluation of aging HVAC system including 18-year-old oil furnace and 16-year-old heat pump. Documented current equipment condition with photos showing basement-installed furnace with connected ductwork and the exterior heat pump unit mounted on concrete pad. Prepared replacement estimate for complete system upgrade.

Performed scheduled preventative maintenance tune-up on a 4-year-old Lennox furnace. Inspected system components, cleaned essential parts, and verified proper operation according to manufacturer specifications. Unit is functioning optimally with no issues detected.

Performed scheduled maintenance on natural gas furnace as part of recurring MVP Heating service. Inspected and photographed interior ductwork, confirming proper insulation integrity with foil-faced lining and filter assembly in good condition. Examined blower wheel/fan assembly which showed clean metallic blades with no visible deterioration or buildup, ensuring optimal airflow performance.

Responded to customer complaint of cracking noise from recently installed Lennox furnace. Upon inspection, determined the noise was normal expansion/contraction of metal heat exchanger during heating cycles, which is common in new furnace installations. Explained to customer that these sounds typically diminish after initial break-in period and do not indicate any mechanical issues or safety concerns.

Inspected electrical breaker panel to diagnose non-functional dryer outlet. Removed faulty circuit breaker and replaced it with new component to restore power to the dryer circuit. Performed safety inspection of the entire breaker box to ensure proper function and compliance with electrical standards.

Performed scheduled MVP furnace maintenance on a Lennox heating system. Inspected and tested the main circuit board with terminal connections and DIP switches, confirming proper functionality. System includes integrated water heater setup with copper and PVC piping network; all components operating within normal parameters.

Diagnosed 16-year-old boiler with intermittent ignition failure. Inspection revealed significant corrosion on pressure gauge housing and deterioration of expansion tank plumbing components. System was operational at time of service, but aging equipment and visible oxidation indicate potential for future ignition failures.

Completed replacement of leaking exhaust pipe system under warranty. Installed new 3" PVC exhaust piping with proper elbow joints and connections, ensuring all safety requirements were met as indicated on manufacturer warning labels. Photo documentation confirms professional installation of the complete exhaust system with all components properly secured and functional.

Completed MVP furnace maintenance service, including inspection of the control board (CEPL131012) with verification of all wire connections and component integrity. Documented system condition with photos showing proper circuit board operation and wiring configuration.

Inspected oil furnace operation and identified need for replacement oil filter and burner control with CAD cell. Parts were ordered but installation is pending as CAD cell was not available during initial visit; will return to complete repair once parts are received.

Completed scheduled MVP Heating Visit maintenance service. Inspected basement utility area, examining plumbing connections and PVC ventilation components. Identified and replaced a bent metal rod component in the heating system, restoring proper functionality.

Inspected 20-year-old geothermal HVAC system in basement utility area. Documented existing installation including air handler/furnace unit with metal exhaust vent, ceiling ductwork, and associated connections for potential replacement. Photographs taken of complete system including main unit, ductwork configuration, and electrical components.

Responded to no-heat call for residence with dual system (oil furnace and heat pump). Diagnosed communication issue between thermostat and heating equipment causing intermittent operation. Customer had previously required manual intervention to activate furnace. Inspected exterior heat pump unit which appeared in normal operating condition with no visible damage.

Performed routine maintenance on 20-year-old geothermal system, inspecting internal electrical components including blower assembly, fuses, and control board. Checked copper tubing, valves, and insulation on refrigerant lines, and verified all electrical connections were secure with no signs of deterioration.

Diagnosed condensate leak from exhaust pipe on furnace. Inspected PVC vent system and identified improper drainage at elbow joint. Repaired connection and verified heat operation was not affected by the leak.

Performed scheduled furnace tune-up service, documenting significant dust accumulation on air filter requiring immediate attention. Completed comprehensive system inspection and recommended regular filter maintenance to ensure optimal system performance and indoor air quality.

Replaced compressor saver on HVAC system per original service agreement. Customer elected to upgrade from existing humidifier to new AprilAire 600A model instead of just servicing the water shutoff and supply line to the current unit. Installation of new humidifier was completed, replacing the previously installed model.

Performed routine maintenance on 2-year-old furnace system. Inspected mechanical components including pipe fittings and identified yellowish fluid with dark residue in the white plastic pipe fitting. Utilized specialized tools to complete the manufacturer-recommended tune-up procedures.