Trusted HVAC, Electrical & Plumbing Services in Streetsboro, OH

Completed MVP cooling maintenance visit on 7-year-old residential HVAC system. Inspected Lennox air handler unit in basement, verifying proper operation of all components, condensate drain lines, and refrigerant connections. Examined outdoor condenser unit, confirmed adequate clearance, checked condition of coil fins, and verified proper airflow. System operating within normal parameters with no issues identified during routine preventive maintenance inspection.

Completed annual air conditioning maintenance on 3-year-old Lennox condensing unit under MVP plan. Performed comprehensive system inspection including electrical connections, capacitor testing, and visual assessment of all components. Unit operating within normal parameters with no deficiencies noted.

Responded to emergency call for severely leaking outdoor water spigot. Upon arrival, accessed basement area to locate and assess the damaged fixture and associated plumbing connections. The outdoor spigot had failed, causing significant water leakage that required immediate attention to prevent further water damage and waste. Inspected the existing plumbing infrastructure in the unfinished basement area, identifying the blue PEX water supply lines and connections serving the exterior spigot. Evaluated the ceiling-mounted piping system, including the PEX lines with metal fittings and copper piping components running through the floor joists. Documented the condition of the installation area, noting the exposed wooden joists, insulation, and concrete block foundation walls for reference. Shut off water supply to the affected line to stop the leak. Removed the damaged outdoor water spigot assembly and assessed the connection point for any additional damage or deterioration. Prepared the

Responded to service call for multiple plumbing leaks in residential property. Addressed leaking plastic piping at kitchen sink and repaired wall line requiring seal in basement bathroom. Inspected plumbing fixtures including shutoff valves, PVC connections, and pipe mounting hardware to ensure proper function and prevent future water damage.

Returned to property to perform refrigerant leak search on Airtemp outdoor condensing unit as previously requested. Utilized electronic leak detector to systematically check all refrigerant connections, coil sections, and service ports. Testing equipment registered reading of 22.2 during diagnostic process, confirming presence of refrigerant leak requiring repair.

Completed MVP cooling maintenance visit on 8-year-old air conditioning system. Performed standard preventive maintenance procedures including inspection of capacitor, electrical connections, and service disconnect. System operating within normal parameters with all components functioning properly.

Responded to report of circuit breaker tripping when equipment was plugged into outlets throughout the residence. Upon investigation, identified an 80V electric riding lawn mower being charged via a power strip in the garage as the source of the electrical overload. The power strip was inadequate for the high amperage draw required by the mower's battery charging system, causing repeated breaker trips that affected multiple circuits. Advised customer on proper charging procedures using a dedicated outlet and circuit appropriate for the equipment's electrical requirements. Inspected and provided estimate for replacement of a GFCI outlet as requested. Verified electrical system functionality after disconnecting the overloading equipment and confirmed no damage to existing circuits or breaker panel.

Completed flush and fill maintenance procedure on HydroJet residential tanked water heater. Drained sediment buildup from tank bottom, flushed system with fresh water supply, and refilled unit to restore optimal operating efficiency and extend equipment lifespan.

Performed routine cooling maintenance on HVAC system. Accessed air handler compartment and conducted diagnostic testing using calibrated digital measurement instrument. Inspected interior components for proper operation, noting normal dust accumulation consistent with regular system use. All measurements recorded within acceptable parameters and unit confirmed operational.

# HVAC Maintenance - Cooling Performed comprehensive preventive maintenance service on an 8-year-old residential air conditioning system. Inspected outdoor condensing unit and electrical panel, verifying proper wiring connections and control circuit functionality. Accessed indoor air handler unit and replaced heavily soiled air filter that had accumulated significant dust and debris, which was restricting airflow and reducing system efficiency. All components inspected and found to be operating within normal parameters following filter replacement and routine maintenance procedures.

Completed scheduled air conditioning maintenance visit. Performed comprehensive system inspection including visual examination of mechanical components, condensate drainage system, and ductwork. Measured and recorded system operating parameters using digital testing equipment, with supply air temperature reading at 50°F indicating proper cooling performance. All components found operating within normal specifications.

Diagnosed exhaust venting issue causing water to discharge in large quantities from furnace exhaust. Upon inspection, discovered that previous third-party rerouting of exhaust piping (performed to accommodate hot tub installation) created a 10-foot trap section with improper pitch, resulting in significant water accumulation. Determined that existing exhaust configuration violated proper venting standards and required correction. Identified that power vent water heater exhaust has identical improper pitch condition and will likely experience similar issues. Proposed two corrective solutions: reroute exhaust piping back to original configuration near hot tub location, or lower exhaust termination through finished basement wall into furnace room to achieve proper pitch and drainage. Customer approved repair work to be scheduled and completed by installation crew to ensure compliant venting system operation.

Responded to service call for air conditioning system blowing warm air with thermostat lockout issues. Inspected condensing unit and confirmed compressor operation but system failing to produce cooling. Examined refrigerant lines and evaporator coil assembly within air handler, noting proper line insulation and drain line installation. Based on visual inspection of copper refrigerant lines showing discoloration patterns and system symptoms, diagnosed potential refrigerant charge issue or restriction in refrigerant circuit preventing proper heat transfer and cooling performance.

Responded to reported crackling sounds from electrical panel occurring when high-draw appliances (microwave and washer) were in operation. Performed diagnostic inspection of main electrical panel and associated components. Upon examination, found disorganized wiring with multiple conductors bundled together throughout the panel enclosure, along with evidence of age-related wear and deterioration. Inspected all circuit breaker connections, bus bar contact points, and wire terminations for signs of arcing, overheating, or loose connections that could cause audible crackling. Verified proper torque on all breaker connections and main lugs. Evaluated panel capacity and load distribution across circuits to ensure adequate amperage for simultaneous operation of high-current appliances. Documented panel condition with photographs showing internal wiring configuration, breaker arrangement, and overall installation state for record-keeping purposes.

Performed assessment of 24-year-old air conditioning system found to be completely empty of refrigerant. Documented existing HVAC ductwork and electrical panel configuration with measurements and photographs for replacement estimate purposes.

Completed scheduled maintenance on 9-year-old air conditioning system under MVP agreement. Performed comprehensive inspection of indoor air handler components including blower wheel assembly, which showed clean operational condition with properly aligned blades and intact motor mounting. Verified attic-mounted unit accessibility, inspected air filtration system, and confirmed all mechanical components functioning within normal parameters. System operational and ready for cooling season.

Completed comprehensive AC tune-up and preventative maintenance on 16-year-old air conditioning system. Performed full system inspection including refrigerant level check, electrical component testing, condenser and evaporator coil examination, air filter assessment, and thermostat calibration verification. System found operating properly with temperature readings confirming adequate cooling performance. All components functioning within normal parameters, and customer confirmed system working satisfactorily prior to service completion.

Performed seasonal maintenance and flush service on an A.O. Smith tanked water heater in a residential property. Upon arrival, confirmed the unit was operating properly with no immediate issues noted. Executed complete tank flush procedure to remove sediment buildup, inspected all copper supply lines, brass fittings, and shut-off valves for proper operation and potential leaks. Verified expansion tank mounting and pressure settings, tested temperature and pressure relief valve functionality, and confirmed all connections were secure throughout the system.

Responded to no cooling call and performed diagnostic evaluation of outdoor condensing unit. Upon inspection, discovered failed fuses in disconnect box preventing power to compressor and condenser fan motor. Removed and replaced dual Ferraz Shawmut TR40R 600V AC time-delay fuses, restored power to unit, and verified proper system operation with all components running within normal parameters.

Performed comprehensive tune-up on 9-year-old residential air conditioning system. Inspected outdoor condenser unit, verified proper operation of compressor and condenser fan motor, checked electrical connections and control board functionality, and confirmed all components operating within normal parameters. Unit shows normal wear consistent with age; no immediate repairs required at this time.